Abstract:STATEMENT OF PROBLEM:Existing virtual articulators simulate mandibular movement by using various parameters and are used to design restorations. However, they are not able to reproduce actual patient movements, and the designs of occlusal wear facets by them and by personalized mandibular movement have not been compared.PURPOSE:The purpose of this clinical study was to establish a clinical application protocol for a virtual articulator based on previous research and to evaluate the accuracy of the occlusal wear facets designed by it.MATERIAL AND METHODS:The gypsum casts of 12 participants were scanned with a cast scanner as the original data. A single crown, 3-unit splinted crowns, a 5-unit fixed partial denture, and a fixed complete denture were virtually prepared on the digital mandibular casts by using the Geomagic Studio 2013 software program. High points were created at the wear facets, and corresponding digital wax patterns with occlusal interferences were generated. The exocad software program was used to design corresponding restorations with the copy method. Static (STA restoration) and dynamic (DYN restoration) occlusal adjustments were carried out with the built-in virtual articulator. The mandibular movements of participants were recorded by the novel virtual articulator system, and the occlusal surfaces of the digital wax patterns were adjusted (FUN restoration). The restorations adjusted with the 3 methods were compared with the original data. The mean value and root mean square (RMS) of 3D deviation and positive volumes (V+) in the occlusal direction were measured. Depending on the normality, 1-way ANOVA and the Kruskal-Wallis test were used to analyze the influence of occlusal surface design methods on the morphology of occlusal wear facets (α=.05).RESULTS:The mean deviation of the 4 kinds of STA restorations ranged from 0.19 mm to 0.22 mm, the DYN restorations from 0.13 mm to 0.17 mm, and the FUN restorations from 0.03 mm to 0.09 mm. A significant difference was found between the STA and FUN restorations of the 3-unit splinted crowns and 5-unit fixed partial dentures (Ρ=.013, Ρ=.021). The mean values of 3D deviation and V+ decreased from the STA group to the DYN group and then to the FUN group. The RMS and V+ were statistically similar (Ρ>.05).CONCLUSIONS:The preliminary results of the study indicate that the FUN 3-unit splinted crowns and 5-unit fixed partial dentures designed with the self-developed virtual articulator were better than the STA restorations. The FUN restorations were more coincident with the morphology of the wear facets on the original teeth.

Design and Construction of Occlusion of Prosthesis

Occlusal Considerations in Periodontal Prosthetics.

Occlusion principle in esthetic restoration of anterior teeth

Occlusion-Based Treatment Planning for Complex Dental Restorations: Part 1

Digitally Designed Occlusion of an Implant-Supported Crown Considering Physiological Tooth Displacement under Occlusal Loading.

Biomechanics of occlusion--implications for oral rehabilitation

A Digital Technique for Occlusal Design of a Posterior Full Crown Based on Physiological Tooth Displacement and Occlusion of Adjacent Teeth.

Digitized occlusal reconstruction for dental prostheses

Occlusion-based Treatment Planning for Complex Dental Restorations: Part 2.

To Evaluate the Effect of Zygomatic Area As Bearing Seat and Zygomatic Osseointegrated Implant from Oral Cavity Ofmaxillary Obturator Prostheses by Mechanics

Biomechanics of oral mucosa

Design of Occlusal Wear Facets of Fixed Dental Prostheses Driven by Personalized Mandibular Movement.

Study on Functional Occlusal Morphology by Using Three-Dimensional Printed Diagnostic Crown and Functional Generated Path Technology

The optimal design and three-dimensional finite element analysis of CAD/CAM integrated roach attachment

A fully digital workflow to design anterior guidance for an implant-supported single crown using a modified patient-specific motion technique

[Computer-Aided Design for Occlusal Rest of the Removable Partial Denture].

Application of 3D digital smile design based on virtual articulation analysis in esthetic dentistry: A technique

Digital design of open hollow obturator framework using existing dentures: A dental technique

Is dynamic occlusal design necessary for anterior guidance recovery in the computer-aided design process? An in vitro study

[Application of Functionally Generated Path Technique in Computer-Aided-design Modeling of Occlusal Surface of Full Crown].

Occlusal Adjustment in the Digital Era – A Working Protocol