Abstract:Composites based on isotactic polypropylene (PP) and sisal fiber (SF) were prepared by melt mixing and injection molding. The melt mixing characteristics, thermal properties, morphology, crystalline structure, and mechanical behavior of the PP/SF composites were systematically investigated. The results show that the PP/SF composites can be melt mixed and injection molded under similar conditions as the PP homo-polymer. For the composites with low sisal fiber content, the fibers act as sites for the nucleation of PP spherulites, and accelerate the crystallization rate and enhance the degree of crystallinity of PP. On the other hand, when the sisal fiber content is high, the fibers hinder the molecular chain motion of PP, and retard the crystallization. The inclusion of sisal fiber induces the formation of beta-form PP crystals in the PP/SF composites and produces little change in the inter-planar spacing corresponding to the various diffraction peaks of PP. The apparent crystal size as indicated by the several diffraction peaks such as L-(110)alpha, L-(040)alpha, L-(130)alpha and L-(300)beta of the a and P-form crystals tend to increase in the PP/SF composites considerably. These results lead to the increase in the melting temperature of PP. Moreover, the stiffness of the PP/SF composites is improved by the addition of sisal fibers, but their tensile strength decreases because of the poor interfacial bonding. The PP/SF composites are toughened by the sisal fibers due to the formation of beta-form PP crystals and the pull-out of sisal fibers from the PP matrix, both factors retard crack growth.

Tensile Properties of Sisal Fiber Reinforced Polypropylene Composite

Study on Properties of Modified Bamboo Fiber Reinforced Polypropylene Composites

Properties of Phenolic Molding Compounds Reinforced with Sisal Fiber

Structural Properties and Mechanical Behavior of Injection Molded Composites of Polypropylene and Sisal Fiber

An Investigation on the Comprehensive Property Assessment and Future Directions of Single Bamboo Fiber Reinforced Polypropylene Composites Fabricated by a Non-Woven Paving and Advanced Molding Process

Preparation of Polypropylene/Sisal Fiber Composites and Study on the Fiber Orientation

SISAL REINFORCED POLYMER COMPOSITES

Manufacturing and Mechanical Properties of Sisal Fiber Reinforced Hybrid Composites

The Investigation of Fracture Properties of Sisal Textile Reinforced Polymers

Research on Tensile Performance of Jute Fiber Reinforced Composites

The Preparation and Property Study of the High Performance SF Reinforced PP Composites

Studies on Mechanical Properties and Morphology of Sisal Pulp Reinforced Phenolic Composites

Behavior of sisal fiber concrete cylinders externally wrapped with jute FRP

Experimental Study on Molding and Mechanical Property of Thermoplastic FRP ,and Bonding Property of Concrete

Composites of Sisal Fiber/polypropylene Based on Novel Vane Extruder: Effect of Interface and Damage on Mechanical Properties

Effect of Silane Coupling Agent Treatment on Structure and Properties of Pp/sisal Fiber Composites

Study on Properties of Sisal Fiber Reinforced PP Composites Prepared by Vane Extruder

Fiber Orientation and Strain Rate-Dependent Tensile and Compressive Behavior of Injection Molded Polyamide-6 Reinforced with 20% Short Carbon Fiber

Preparation of Long Sisal Fiber-Reinforced Polylactic Acid Biocomposites with Highly Improved Mechanical Performance

Reinforcement of Polypropylene Using Sisal Fibers Grafted with Poly(methyl Methacrylate)

Fabrication and mechanical properties of short sisal fiber reinforced composites used for dental application