Abstract:For scientific computing and high-resolution imaging applications, this paper presents a pipelined reconfigurable processor to implement variable-length single-precision floating-point FFT/IFFT and DCT/IDCT computations compatible with the IEEE 754 standard. In order to minimize the total hardware overhead and power consumption, a reconfigurable radix-4 butterfly (RR4BF) is proposed to reduce 75% adders in comparison to the conventional parallel radix-4 butterfly, and the partially shared Ping-Pong structured register bank (PSPPRB) provides an efficient and specific intermediate data caching mechanism to realize the maximized adder resource utilization ratio in RR4BF and to guarantee the high throughput for the pipelined design. Moreover, fused floating-point 4-input adder and fused floating-point 2-term dot product unit are proposed, which can not only improve about 3dB signal-to-quantization-noise ratio (SQNR), but also save 28% and 19% hardware overhead compared with discrete implementations and previous state-of-the-art design, respectively. Simulation results show that the latency for FFT computations is about 25% of the R4SDF design without any throughput loss, and over 139dB SQNR is achieved. Logic synthesis results in a 65nm CMOS technology show that the power consumption ranges from 43.5mW to 372.3mW for 16- to 1024-point FFTs at 500MHz, and the total hardware overhead is equivalent to 543k NAND2 gates.

High-speed Digital Pulse Compression Based on FPGA

Pulse Compression Based on FPGA Using Two Butterflies

Implementation of Digital Pulse Compression System Based on FPGA

Design and Implementation of High Speed Fixed-Point Fast Fourier Transform Processor

The High-speed General Design of Pulse Compression Based on FPGA

A High-Speed Real-Time Digital Pulse Compression System Based On Tms320c6201

Realization of a Floating-point Pulse Compression Processor with FPGA

Design and implementation of high speed radix-4 FFT processor based on FPGA

Design of High-speed Radix-4 FFT Processor Based on CORDIC

Study of the High-Speed Real-Time Digital Pulse Compression System Based on TMS320C6201

Design of Time Domain Pulse Compressor Based on FPGA

An Efficient Radix-2 Fast Fourier Transform Processor with Ganged Butterfly Engines on Field Programmable Gate Arrays.

Implementation of the 4096-Point Radix-4 FFT Module Based on FPGA

A High-Throughput Fixed-Point Complex Divider for Fpgas

Application of CORDIC Algorithm and FPGA in Digital Pulse Compression System of LFM Signal

Hardware Implementation of Configurable High-speed and High-precision FFT

Design and Implementation of SoPC-compatible FFT Module

A 4.2 Ps Time-Interval Rms Resolution Time-To-Digital Converter Using A Bin Decimation Method in an Ultrascale Fpga

Implementation of digital orthogonal transformation pulse compression system based on FPGA

A pipelined area-efficient and high-speed reconfigurable processor for floating-point FFT/IFFT and DCT/IDCT computations.

An Ultra-high-speed Fully-parallel Fast Fourier Transform Design