Abstract:Broadband signals are widely used in active sonar and synthetic aperture sonar imaging, correspondingly, which require calculating broadband echo in frequency domain. Finite element (FE) is an effective method to calculate the echo characteristics of an underwater target. However, the computing time is tremendous due to the large number of iterative computations on a 2D or 3D grid. Especially when the object is large, it is difficult or even impossible to use a scattering calculation for FEM in high frequency. A 2D-FE numerical model is built to calculate scattering acoustic field for the object immersed in water. Far field of scattering acoustic is decomposed into several modes. Numerical calculation shows that the target is divided into the unit grid comparable to the wavelength of incident wave at low frequency, and scattering intensity of each mode fluctuates relatively little. If the waves are at high frequencies, the scale of the target is much larger than the wavelength, and scattering intensity or characteristics of the target fluctuates rapidly with increasing frequency. A nonuniform sampling method based on mode decomposition is presented: that is, in wavenumber domain, interval of calculation frequencies of each mode decreases from low to high frequency. Conventional interpolation algorithm is available to obtain scattering intensity of frequency point by point. After interpolation, all results of different modes are summed to get broadband echo characteristics of the underwater object. Several typical targets, such as an elastic sphere and a shell-like elastic cylinder are used to verify the efficiency of this methodology. A substantial reduction in computation burden is achieved by avoiding point-by-point computation in wavenumber domain. This represents an advantage in the computational efficiency of the Finite Element method.

Broadband array yardstick estimation of underwater volume target

A broadband ADCP scattering echo model

Measurements of the Low-Frequency Underwater Channel Features in a Littoral Environment Using a Plasma Sound Source

Data-based Depth Estimation of an Incoming Autonomous Underwater Vehicle.

Bistatic Localization of Objects in Very Shallow Water.

Near-field beamforming for a Multi-Beam Echo Sounder: Approximation and error analysis

Research on the method for measuring radiated noise by an underwater target in low frequency band based on the vector hydrophone

Three Dimensional Passive Localization Based on Distributed Buoy Array for Underwater Moving Sound Source with High Speed

A Depth-Adaptive Waveform Decomposition Method For Airborne Lidar Bathymetry

A Real-Time 3-D Underwater Acoustical Imaging System

A Method for Estimating the Distance of Near-Ocean-Bottom Sources by Combining VLF Underwater Acoustic Field and Scholte Wave Field

Shallow-water Wideband Low-Frequency Synthetic Aperture Sonar for an Autonomous Underwater Vehicle

An Imaging Algorithm for High-speed Side-scan Sonar Based on Multi-beam Forming Technology

Channel Distortion on Target Scattering Amplitude in Shallow Water

Signal Processing Algorithm and System Realization of Broadband Parametric Array Sub-Bottom Profiler

Research on the broadband source localization of a vector hydrophone vertical line array in the deep sea

Depth estimation for broadband sources with a vertical line array in deep water

Numerical simulation of backscattered echo signal of lidar in near field of water

Fast prediction of broadband scattering from an underwater target using non-uniform sampling method based mode decomposition

Target Depth Estimation by Frequency Interference Matching for a Deep Vertical Array

Experimental Study of Omnidirectional Scattering Characteristics of Complex Scale Targets Based on Coded Signals