Abstract:Because of its extreme hardness, wear resistance, good thermal conductivity and low thermal expansion coefficients, a diamond tool exhibits a range of properties which makes it a key and unique component in many fields of mechanical engineering. In comparison with the other types of diamond tools, the thin film diamond-coated cutting inserts have great potentialities in the commercial application because of its low costs for fabrication equipment and high performance. Thus, they are on the verge of becoming the next generation of tools used for high speed machining non-ferrous metals and alloys, metal-compound materials, and hard brittle non-metals. However, the poor adhesion of the diamond film on the substrate becomes the main technical barriers for the successful development and commercialization of diamond-coated tools. In this paper, diamond thin films were deposited on WC-Co cemented carbide substrates by the electron aided hot filament chemical vapor deposition (EACVD), using a mixture of hydrogen and acetone as source gases. A new multiple chemical pre-treatment including microwave oxidation, reaction in alkaline solution and cleaning by ultrasonic treatment in acid solution has been performed for free shape cemented WC-Co drills in order to increase the diamond nucleation and to enhance the coating adhesion. And also, another new pretreatment method using Ar-HZ gas etching decarburization by microwave plasma is performed for the WC-Co substrate surface. The influences of this pretreatment technique on the adhesion strength, diamond nucleation and surface morphology of the diamond thin film are investigated. Scanning electron microscope (SEM) was used to view the substrate morphology, and to examine the cobalt removal. After pre-treatment, the surface of the WC-Co substrate becomes slightly rough, but its composition and structure shows no changes identified by X-ray diffraction (XRD). Scanning electron microscope (SEM) indicates a distribution of uniform micro-roughness WC grains on substrate surface. And also the research results show that the pretreatment using Ar-H etching decarburization by microwave plasma is an effective method to enhance adhesive strength. The appropriate CVD processes were studied for the fabrication of tools with complex geometries. An adequate amount of additive can effectively prevent the overflow of Co from inner to surface of the substrate and avoid the catalytic effect of Co during CVD. The smooth diamond film with low surface roughness can be deposited by increasing the carbon source concentration and reducing the reactive pressure at the later stage of CVD process. The diamond morphology quality and homogeneity of coatings were characterized by SEM and Raman spectroscopy. The cutting performances of diamond-coated tools were studied by the cutting tests of difficult-to-machine materials. The research results show that the high quality diamond coating has been deposited on complex shape substrates for WC-Co cemented carbide twist drills. The cutting performances of diamond-coated drills are improved further by the new pretreatment and CVD process. It is of great significance for the fabrication and application of the diamond-coated tools with complex geometries.

Chemical Vapour Deposition Diamond Coated Drawing Dies

Fabrication And Application Of Chemical Vapor Deposition Diamond-Coated Drawing Dies

Deposition and Application of Cvd Diamond Film on the Interior-Hole Surface of Shaped-Wire Drawing Die

MASS PRODUCTION OF HFCVD DIAMOND-COATED WIRE-DRAWING DIES WITHOUT FILAMENT THROUGH THE HOLE

Fabrication and Applications of Ultra-Smooth Composite Diamond Coated Wc-Co Drawing Dies

Fabrication and application of nano–microcrystalline composite diamond films on the interior hole surfaces of Co cemented tungsten carbide substrates

CVD Diamond Coated Drawing Dies: a Review

Application of Ultra-Smooth Composite Diamond Film Coated WC–Co Drawing Dies under Water-Lubricating Conditions

Fabrication and Characterisation of Ultra Fine-Grained Diamond Coatings on the Interior Hole Surface

THE ABRASION RESISTANCE AND ADHESION OF HFCVD BORON AND SILICON-DOPED DIAMOND FILMS ON WC–Co DRAWING DIES

Deposition And Application Of Cvd Diamond Films On The Interior-Hole Surface Of Silicon Carbide Compacting Dies

The Design of Large-aperture HFCVD Diamond-coated Drawing Die Preparation System and Experimental Study on Its Application

Fabrication and application of boron-doped diamond coated rectangular-hole shaped drawing dies

Growth of Diamond Coatings in Wire-Drawing Die by Modified Hot Filament Chemical Vapor Deposition:A Simulation and Experimental Study

Fabrication and application of nano/microcrystalline composite diamond coated drawing dies using alternative carbon sources

Fabrication and Application of Si-Doped Diamond Coated Welding Dies

Wear Behavior of Diamond-Coated Drawing Dies

Preparation of Diamond Coated Drawing Die

Fabrication and Application of Smooth Composite Diamond Films

Fabrication and application of high quality diamond-coated tools

A New Multiple Chemical Pretreatment For Fabrication Of High Quality Cvd Diamond-Coated Drills