Abstract:Conventional methods for hot extrusion of magnesium (Mg) alloy sheets have limitations for microstructure improvement and mechanical property enhancement. Co-extrusion of Mg alloy with an Al alloy core provides an opportunity for refining the grain size and improving basal texture. This study introduces a novel severe plastic deformation (SPD) method, Direct Extrusion-Continuous Shear (DE-CS), utilizing 6063 Al alloy as the core to fabricate innovative Mg/Al clad composite sheets. Monolithic Mg sheets (non-co-extruded condition) are extruded under identical conditions for comparison. By evaluating the microstructure and mechanical properties of AZ31 Mg alloy under co-extrusion and non-co-extrusion conditions, the positive effect of Mg-Al composite billet co-extrusion on AZ31 Mg alloy is established. The grain refinement effect in co-extruded samples is superior, enhancing plasticity without significant reduction in tensile strength. The microstructure evolution and dynamic recrystallization (DRX) behaviour of AZ31 Mg alloy during co-extrusion were analyzed comprehensively. The results indicate that, in the initial stages of deformation, various variants of {10-12} extension twins (ETs) play a crucial role in refining the original grains, forming initial [10-10]//ED fiber texture components alongside other non-basal components. Upon entering the shear deformation (SD) zone, deformed twins disappear, and small dynamically recrystallized (DRXed) grains emerge along boundaries of coarse deformation grains and within the grains. Strong shear deformations and compressive stress from transverse direction (TD) induce intensified prismatic and pyramidal slip, promoting continuous dynamic recrystallization (CDRX) and discontinuous dynamic recrystallization (DDRX). CDRX predominantly affects elongated deformed grains, forming an [10-10]//ED fiber texture through high-energy grain boundary segmentation. Subsequently, compatible stress increases due to the activity of non-basal slip dislocation and the reduction in grain boundary (GB) size. DDRX emerges as the dominant mechanism, generating randomized [10-10]//ED fiber and non-fiber textures within parent grains and at boundaries.

Extrusion Force of AZ Series Mg Alloy During Thermal Simulated Extrusion Forming

Effects of Al Content and Homogenization on Microstructure of the AZ Series Alloys

Numerical and Experimental Investigation on Hot Backward Extrusion Process of Mg-Gd-Y-Zn-Zr Magnesium Alloy

Simulation of Extrusion Process of AZ31 Magnesium Alloy

Extrusion-shearing Process of AZ61 Magnesium Alloy Based on Numerical Simulation

Study of the microstructure, texture and tensile properties of as-extruded AZ91 magnesium alloy

Microstructure and Tensile Properties of AZ61 Magnesium Alloy Subjected to an Extrusion-Forging Compound Processing

Effect of Extrusion on Mechanical Properties of AZ91 Cast Magnesium Alloy

Effect of Extrusion Deformation on Microstructures and Properties of AZ31 Magnesium Alloy

Influence of direct extrusion and torsional deformation on microstructure and properties of magnesium alloys

Microstructure and Mechanical Properties of AZ31 Mg Alloy Fabricated by Pre-compression and Frustum Shearing Extrusion

Role of Grain Refinement Mechanism on Microstructure and Performance in AZ31B Alloy During Interactive Alternating Forward Extrusion (AFE) Process

Microstructural evolution and dynamic recrystallization model of extruded homogenized AZ31 magnesium alloy during hot deformation

Simulation on Continuous Extrusion Forming Process of AZ31 Magnesium Alloy

Effects of optimizing continuous forging extrusion process on the microstructure and mechanical properties of AZ31 magnesium alloy

Deformation behaviour, microstructure evolution and dynamic recrystallization mechanism of AZ31 magnesium alloy under co-extruded by Mg-Al composite billet

Influence of Extrusion Conditions on Microstructure and Mechanical Properties of Mg-2Gd-0.3Zr Magnesium Alloy

Formability of Wrought Magnesium Alloys by Hot Compression Testing and Laboratory‐Scale Extrusion

Microstructure Evolution and Deformation Behavior of AZ31 Magnesium Alloy During Alternate Forward Extrusion

Double Extrusion of Mg-Al-Zn Alloys

Microstructure and mechanical properties of Mg-Gd-Zn-Zr alloy after hot extrusion