Abstract:A portable and low-cost miniaturized analysis system was proposed, in which microchip electrophoresis (MCE) and chemiluminescence (CL) were used as the separation and detection units, respectively. A porous monolithic plug was created in the separation channel of the microchip as a select valve, which prevented the pressure-driven CL reagents flowing back into the separation channel but allowed electrophoretic migration along the separation channel. The sensitivity was greatly enhanced by improving the mixing efficiency using a spiral detection channel with an increased length facing the photomultiplier tube (PMT). Peak width could be significantly reduced by increasing the flow rate of CL reagents. Putting grounding electrode before the detection channel significantly improved the reproducibility. A simple and compact subatmospheric pressure fluid-driven device was developed for manipulating the whole analytical process, including variable-volume sample loading, electrophoretic separation and CL reagents transportation. All miniaturized components for constructing a portable MCE-CL system are commercially available. This approach considerably simplified the operation and equipments for constructing an efficient MCE-CL system. Nine metal cations, such as Cr(III), Co(II), Cu(II), Ni(II), Au(III), Mn(II), Zn(II), Pt(II), Pb(II) were successfully separated within 200 s. Migration time precisions ranging from 0.39% for Cr(III) to 2.1% for Cu(II) were obtained for ten consecutive determinations with peak height precisions from 1.67% for Co(II) to 5.73% for Pb(II). Detection limits ranging from 7.5 x 10(-11) mol L(-1) for Co(II) to 8.3 x 10(-9) mol L(-1) for Pb(II) were achieved, which were about three orders lower than the present MCE-CL system. It has been applied for the determination of metals in tea. The results with the recoveries from 97.0% to 102.3% proved that the proposed MCE-CL system offers a number of benefits including miniaturization, high sensitivity and better resolution.

Diffusion layer based probe-in-tube microdevice for selective analysis of electroactive species

Highly selective amperometric glucose microdevice derived from diffusion layer gap electrode

A Durable and Miniature Microfluid Device for Detection of Aggregation-Induced Emission Molecules

Integrated Probe for Electrochemical Analysis of Small Volume Droplets

A Compact and Low-Cost Miniaturized Analysis System Composed of Microchip Electrophoresis and Chemiluminescence Detection Manipulated by a Simple Subatmospheric Pressure Fluid-Driven Device

Triggering Interface Potential Barrier: A Controllable Tuning Mechanism for Electrochemical Detection

In Situ Chemical Probing of the Electrode-Electrolyte Interface by Tof-Sims

Probing Trace Hg2+ in a Microfluidic Chip Coupled with in Situ Near-Infrared Fluorescence Detection

INVESTIGATION ON MICROELECTRODES .15. DIFFUSION ON MICROBAND AND MICROBAND ARRAY ELECTRODES

Micropipet Tip-Based Miniaturized Electrochemical Device Combined with Ultramicroelectrode and Its Application in Immobilization-Free Enzyme Biosensor

A parallel line probe for spatially selective electrochemical NMR spectroscopy

An Electrochemical Device with a Multifunctional Sensor for Gas Diffusivity Measurement in Fuel Cells

Selective Glucose Detection Based on the Concept of Electrochemical Depletion of Electroactive Species in Diffusion Layer

D-π-A Dual-Mode Probe Design for the Detection of nM-Level Typical Oxidants

A miniaturized electrochemical device integrating a biconical microchannel and carbon fiber disk ultramicroelectrode.

Mediator-Free SECM for Probing the Diffusion Layer pH with Functionalized Gold Ultramicroelectrodes

Micro-electrode System Designed to Determine H+ Concentration Distribution at Particle-Water Interface.

A Laminar-Flow Microfluidic Device for Quantitative Analysis of Microbial Electrochemical Activity

Spatiotemporal Visualization and Chemical Identification of the Metal Diffusion Layer at the Electrochemical Interface

A Cost-Efficient and Portable Sulfide Device with in Situ Integrating Gas-Permeable Porous Tube Isolation and Long Path Absorbance Detection.

A parallel diffusion-based microfluidic device for bacterial chemotaxis analysis.