Abstract:Owing to the fluctuating energy demand from consumer side, combined cooling, heating and power (CCHP) system operates at off-design condition most of the time. Moreover, the heating/power surplus is a common problem for the conventional CCHP system. In order to improve the precision of performance prediction and partly relieve the heating surplus, a steam injected gas turbine (STIG) based CCHP system considering off-design condition is proposed. The system consists of a steam injected gas turbine, double-pressure heat recovery steam generator (HRSG), heat exchanger, absorption chiller and auxiliary boiler. Two different operation strategies including turbine inlet temperature (TIT) strategy and variable guide vanes (VGVs) strategy, are illustrated to access the part-load performance of gas turbine and CCHP system. The performance indicators, like primary energy saving rate (PESR), primary energy rate (PER) are set up to evaluate the thermodynamic performance of the CCHP system. A simple gas turbine (SGT) based CCHP is chosen as the comparative object and two energy demand cases are selected to validate the advancement. The results show that VGVs strategy does not improve the gas turbine efficiency significantly but bring more exhaust heat into HRSG. VGVs strategy advances the heating to power ratio, PESR and PER around the whole part load condition, i.e., PESR is elevated from 0.3254 to 0.3743 by VGVs at the half of gas turbine load without injected steam. Injecting steam is a more effective way to improve gas turbine efficiency rather than using VGVs strategy while implementing same gas turbine load. Steam injection does not always enhance the PESR, but the PER keeps decreasing as injected steam flow increases around the whole load. STIG based CCHP system with VGVs operation strategy gets the best performance among these studied approaches, and the maximum enhancement of PESR reaches 0.3171 in the proposed energy demand cases.

Investigation of efficiency improvement of combined cycle power plant

Performance Improvement of Combined Cycle Power Plant Based on the Optimization of the Bottom Cycle and Heat Recuperation

Thermodynamic performance analysis and algorithm model of multi-pressure heat recovery steam generators (HRSG) based on heat exchangers layout

Preliminary Conceptual Exploration about Performance Improvement on Supercritical CO2 Power System Via Integrating with Different Absorption Power Generation Systems

A New Perspective of Thermoeconomic Analysis on a Gas-Steam Combined Cycle Power Plant

Performance study of reheat gas turbine matched with supercritical once-through HRSG

The Performance Study of 9FA Gas Turbine Combined Cycle

Performance Improvement of a 330mwe Power Plant by Flue Gas Heat Recovery System

Study on Optimization of HRSG in IGCC System

Thermoeconomic Optimization of Steam Pressure of Heat Recovery Steam Generator in Combined Cycle Gas Turbine under Different Operation Strategies

On Simulation and Modeling Methods for Heat Recovery Steam Generators

Thermodynamic Analysis of an LNG Fuelled Combined Cycle Power Plant with Waste Heat Recovery and Utilization System

Multi-objective Optimization Analysis on Gas-Steam Combined Cycle System with Exergy Theory

PERFORMANCE COMPARISON OF GAS TURBINE CYCLE COMBINED WITH SUPERCRITICAL CO2 RECOMPRESSION AND REGENERATIVE CYCLE

Study on Off-Design Characteristics of Combined Heat and Power Based on Combined Cycle Gas Turbine Units

Off-design Heating/power Flexibility for Steam Injected Gas Turbine Based CCHP Considering Variable Geometry Operation

Part-load performance analysis of a combined cycle with intermediate recuperated gas turbine

Option of IGCC System's Key Components and Their Influence on the Power Plant's Overal Performance(Ⅱ):The HRSG

Optimization of steam parameters in double-pressure heat recovery steam generators

System Design for 700 °C Power Plants: Integration Scheme and Performance Evaluation

The Effects of Parameters on Hrsg Thermodynamic Performance