Abstract:Abstract Three strategies are used in this paper to investigate suspension systems behaviour. Firstly, the steel coil passive spring (conventional spring) is replaced by air spring, which comprised of an airbag, a connection pipe with a control valve, and a reservoir tank system. The influence of air spring pressure, reservoir volume and connection pipe diameter on suspension system behaviour are investigated. Secondly, a logic control scenario for the oscillation mass of air between spring airbag and the reservoir is applied by using on/off valve controller to study the controlling valve influence on the whole vehicle dynamics responses. Thirdly, the MR damper is used to introduce a variable damping coefficient as a semi-active control (skyhook) strategy of the suspension system. To represent the suspension system with the earlier mentioned strategies, a mathematical model 2-DOF for a quarter car is adopted along with governing equations of the air spring and semi-active skyhook control under the Matlab/Simulink platform. The obtained result, i.e., suspension travel displacement, body acceleration, dynamic tire force, and damper dissipation energy, are calculated in terms of RMS to show up the dynamic behaviour of suspension system considering four configurations in various control styles. The models’ responses were examined versus two road excitations pattern, including harmonic excitation and random road excitation. The results show that using air spring is considerably increased suspension quality, furthered more the suspension system is significantly enhanced when semi-active strategies are applied on air spring and MR damper.

Reliability Sensitivity Analysis on Influence of Driving Force to Mechanical Property of Mcpherson Suspension

Reliability Sensitivity Analysis on Influence of Vertical Force to Mechanical Property of Lower Cross Arm Suspension

The Application of Sensitivity Method in Vehicle Dynamics Analysis

Research on Structural Reliability Design Method for Suspension Structure of Vehicle

Static and Dynamic Stiffness Characteristics Analysis of Hydro-Pneumatic Suspension

Road-friendliness of interconnected hydro-pneumatic suspension based on ADAMS/Simulink/AMESim

Calculating Method of Hard Point Forces and Moments of Mcpherson Suspention System

Dynamic Characteristics Analysis of Spatial Suspension Mechanisms Based on Instantaneous Screws

Dynamic modeling and computer simulation analysis of the air spring suspension

DYNAMIC LOADING EFFECTS ON CAR SUSPENSION COMPONENTS DURING ROAD DRIVING

Stiffness Design, Analysis and Validation of a Parallel-Mechanism Equivalent Suspension System

Dynamic Analysis of a Planar Suspension Mechanism Based on Kinestatic Relations

The Analysis of the Matching Points Between Auto-Body and Front Suspension to Alignment Parameters

The Concept Design and Dynamics Analysis of A Novel Vehicle Suspension Mechanism with Invariable Orientation Parameters

Optimization of Positioning Parameters for McPherson Front Suspension Based on ADAMS/Car

The Analysis of the Influence of the Independent Suspension on the Comfort for a Mine Truck

Analysis of the mechanism kinematic interference of a heavy articulated dump truck's balanced suspension system

Parametric analysis of vehicle suspension based on air spring and MR damper with semi-active control

Elastokinematics and Compliance of a Rectilinear Rear Independent Suspension

Dynamic Analysis of Car Suspension Using ADAMS/Car for Development of a Software Interface for Optimization

Performance analysis of vehicle magnetorheological semi-active air suspension based on S-QFSMC control