Abstract:Abstract The objective of the study was to prepare low-cost activated carbon from cornelian cherry stones (Cornus mas L.) and compare its adsorption capacities for CO 2 with that of commercial multiwalled carbon nanotubes, activated carbon, MCM-41 and four zeolites (silver exchanged, 13X, faujasite type and linde type A). BET, t-plot and DFT methods were used for the characterization of all adsorbent samples based on N 2 adsorption-desorption data obtained at 77 K. The produced activated carbon samples (KAC and NAC) were also characterized by scanning electron microscopy (SEM). The adsorption data were evaluated by several isotherm models such as Freundlich, Langmuir, Temkin, DR and Harkins-Jura isotherm models. Langmuir adsorption isotherms constants related to adsorption capacity, W m were found as 11.496, 6.175, 4.189, 3.986 and 3.50 mmol/g for NAC, KAC, faujasite type zeolit, MCM-41 and AC, respectively. The CO 2 adsorption capacities of the silver exchanged, 13X, faujasite type and linde type A zeolites were 10.814, 10.241, 14.608 and 13.343 wt%, respectively. Microporous zeolites showed higher CO 2 adsorption capacities than the mesoporous MCM-41 and MWCNT. The CO 2 adsorption capacity of commercial activated carbon (AC) was found to be 9.428 wt%, while the CO 2 adsorption capacities of activated carbons obtained using NaOH and KOH were found to be 13.685 and 15.057 wt%, respectively. The highest CO 2 adsorption capacity of 15.057 wt% was achieved with KAC. It could be confirmed that NaOH or KOH activation plays an important role to determine the porous structure and amount of CO 2 adsorbed. Results showed that activated carbon produced from cornelian cherry stones is suitable for the adsorption of CO 2 and could be used as a low cost effective adsorbent in the capture of CO 2 .

Porous Structure and Liquid‐phase Adsorption Properties of Activated Carbon Aerogels

Structure and Adsorption Properties of Activated Carbon Aerogels

The Porous Structures of Activated Carbon Aerogels and Their Effects on Electrochemical Performance

Hierarchical Pore Structure of Activated Carbon Fabricated by CO2/microwave for Volatile Organic Compounds Adsorption

Preparation of Activated Carbon Aerogels with Hierarchically Porous Structures for Electrical Double Layer Capacitors

Adsorption of Volatile Organic Compounds on Activated Carbon Fiber Prepared by Carbon Dioxide

Effect of Micropore and Mesopore Structure on CO2 Adsorption by Activated Carbons from Biomass

Activated Carbon Powders from Wool Fibers

Carbon Dioxide Adsorption on Carbon Nanofibers with Different Porous Structures

Preparation of Carbon Aerogels with Different Pore Structures and Their Fixed Bed Adsorption Properties for Dye Removal

Adjusting the Porosity of Coal-Based Activated Carbons Based on a Catalytic Physical Activation Process for Gas and Liquid Adsorption

Fabrication and Evaluation of Mesoporous Poly(vinyl Alcohol)-Based Activated Carbon Fibers

Preparation and Evaluation of Nitrogen-Tailored Hierarchical Meso-/Micro-porous Activated Carbon for CO2 Adsorption

The Adsorption of Organic Vapours on Carbon Aerogels and Their Precursor Organic Aerogels

Pore Structures of Carbon Aerogels and Their Effects on Electrochemical Supercapacitor Performance

On Porosity of Carbon Aerogels from Sol-Gel Polymerization of Phenolic Novolak and Furfural

Adsorption Of Volatile Organic Compounds In Nitrogen Streams On Oxidized Activated Carbon Fibres

Adsorption and Desorption Behavior of Benzene and Toluene on Porous Carbon Monoliths

Ultrahigh-surface-area Activated Carbon Aerogels Derived from Glucose for High-Performance Organic Pollutants Adsorption.

Liquid-phase Methylene Blue Adsorption of a Novel Hierarchical Porous Carbon Aerogel

Freundlich, Langmuir, Temkin, DR and Harkins-Jura Isotherm Studies on the Adsorption of CO2 on Various Porous Adsorbents