Abstract:Doppler lidar (DL) applications with a focus on turbulence measurements sometimes require measurement settings with a relatively small number of accumulated pulses per ray in order to achieve high sampling rates. Low pulse accumulation comes at the cost of the quality of DL radial velocity estimates and increases the probability of outliers, also referred to as "bad" estimates or noise. Careful filtering is therefore the first important step in a data processing chain that begins with radial velocity measurements as DL output variables and ends with turbulence variables as the target variable after applying an appropriate retrieval method. It is shown that commonly applied filtering techniques have weaknesses in distinguishing between "good" and "bad" estimates with the sensitivity needed for a turbulence retrieval. For that reason, new ways of noise filtering have been explored, taking into account that the DL background noise can differ from generally assumed white noise. It is shown that the introduction of a new coordinate frame for a graphical representation of DL radial velocities from conical scans offers a different perspective on the data when compared to the well-known velocity–azimuth display (VAD) and thus opens up new possibilities for data analysis and filtering. This new way of displaying DL radial velocities builds on the use of a phase-space perspective. Following the mathematical formalism used to explain a harmonic oscillator, the VAD's sinusoidal representation of the DL radial velocities is transformed into a circular arrangement. Using this kind of representation of DL measurements, bad estimates can be identified in two different ways: either in a direct way by singular point detection in subsets of radial velocity data grouped in circular rings or indirectly by localizing circular rings with mostly good radial velocity estimates by means of the autocorrelation function. The improved performance of the new filter techniques compared to conventional approaches is demonstrated through both a direct comparison of unfiltered with filtered datasets and a comparison of retrieved turbulence variables with independent measurements.

Denoising Processing of Doppler Wind Lidar Data in Moving Measurement

Research on denoising method based on temperature and humidity profile lidar

Coherent Doppler wind lidar signal denoising adopting variational mode decomposition based on honey badger algorithm

Enhanced Wind-Field Detection Using an Adaptive Noise-Reduction Peak-Retrieval (ANRPR) Algorithm for Coherent Doppler Lidar

Denoising coherent Doppler lidar data based on a U-Net convolutional neural network

Improved wind speed estimation and rain quantification with continuous-wave wind lidar

Analysis of data processing method for Doppler wind lidar

Analysis on wind retrieval methods for Rayleigh Doppler lidar

Pulse Accumulation Approach Based on Signal Phase Estimation for Doppler Wind Lidar

Research on Speed Measurement Signal Denoising Processing of Laser Doppler Vibrometer

Evaluation and Wind Field Detection of Airborne Doppler Wind Lidar with Automatic Intelligent Processing in North China

Research on optimizing the optical local-oscillator power of Coherent Doppler LiDAR to enhance wind velocity measurements

Real-time wind field measurements using all-fiber mobile Doppler wind lidar

Novel Rotor Effective Wind Speed Estimation Method for Light Detection and Ranging Application

Noise filtering options for conically scanning Doppler lidar measurements with low pulse accumulation

Research and Application of Denoising Algorithm for Mie Lidar Signal

Comprehensive wind correction for a Rayleigh Doppler lidar from atmospheric temperature and pressure influences and Mie contamination

Mobile Rayleigh Doppler lidar for wind and temperature measurements in the stratosphere and lower mesosphere

A Novel Lidar Signal-Denoising Algorithm Based on Sparrow Search Algorithm for Optimal Variational Modal Decomposition

Analysis of Errors Induced by Angle Tuning in Direct Detection Doppler Wind Lidar

Efficient Lidar Signal Denoising Algorithm Using Variational Mode Decomposition Combined with a Whale Optimization Algorithm