Abstract:Dehydration of solvents using hydrophilic polyvinylalcohol pervaporation membranes is a well-established technology. However, these polymeric membranes may not be suitable for applications involving high water concentrations or applications containing harsh solvents like dimethylformamide due to membrane stability problems and swelling effects. These applications are commonly encountered in the pharmaceutical industry. The recent development of solvent and temperature-resistant, hydrophilic zeolite NaA membranes has made it possible to overcome the above limitations of hydrophilic polymeric membranes. In this study, experiments were conducted with various alcohol–water (methanol–water, ethanol–water, isopropanol–water) mixtures and with dimethylformamide–water mixture over a wide range of temperatures (25–70°C) and solvent concentrations (0–100wt.%). The total flux for ethanol–water mixture was found to vary from 2 to 0.05kg/m2/h at 60°C as the feed solvent concentration was increased from 0 to 100wt.%. The total flux for methanol–water and isopropanol–water mixtures was observed to vary from 2 to 0.15 and 2 to 0.21kg/m2/h, respectively, as the alcohol concentration was changed from 0 to 100wt.%. The total flux was also found to remain approximately constant up to 70wt.% alcohol in the feed. Both water to ethanol and water to isopropanol separation factors were observed to lie between 1000 and 5000 over a wide range of solvent concentrations. The water to methanol separation factor was found to lie in the range of 500–1000. The total flux behavior was also found to be very similar for the other solvent–water mixtures such as acetone–water and ethyl acetate–water. The ionic Na+ sites in the NaA zeolite matrix play a very important role in the water transport through the membrane. These sites act both as water sorption and transport sites. The surface diffusion of water occurs in an activated fashion on these sites. The precise micropore structure of the zeolite cage helps in a partial molecular sieving of the large solvent molecules leading to high separation factors. The zeolite membrane active layer may contain certain non-zeolitic interstitial pores with preferential water sorption. One of the reasons for the high hydrophilicity of zeolite NaA is the strong electrostatic interaction between ionic sites and the water molecule (due to its highly polar nature). A high degree of hydrophilicity of the zeolite membrane is suggested from a pure water sorption value of 0.6g/g zeolite. The detailed interpretation of this result, however, requires consideration of both true zeolitic microcavity uptake as well as interstitially held water between crystallites. Any molecule highly polar in nature (indicated by a high dipole moment or dielectric constant) is expected to strongly interact with the ionic sites in the cage. In fact, this effect was indirectly observed for the dimethylformamide–water mixture. The water flux in this case, was found to be lower than that for alcohol–water mixtures thus indicating the possibility of competitive sorption of dimethylformamide molecules on the zeolite sites. A linear correlation was found to exist for the pure water flux through the membrane and the partial pressure driving force of the water. The other alcohol–water mixtures followed this trend reasonably well. The use of zeolite membranes for dehydration of complex solvent streams has been actually demonstrated by experiments with a synthetic ethyl acetate mixture. Thus, the use of inorganic zeolite membranes for difficult solvent separations seems to be very attractive.

Pervaporation and Vapor Permeation Dehydration of Fischer–Tropsch Mixed-Alcohols by LTA Zeolite Membranes

Process Design of Continuous-Flow Pervaporation Separation for Alcohol Dehydration

A study on the pervaporation of water–acetic acid mixtures through ZSM-5 zeolite membranes

Study on Pervaporation Membranes for Removing Methanol from C 5 or Methyl Tert-butyl Ether Mixtures

Microstructure Manipulation of MFI-type Zeolite Membranes on Hollow Fibers for Ethanol–water Separation

Zeolite Mfi Membranes for Separation of Ethanol/Water Mixture

Molecular design of thin film composite (TFC) hollow fiber membranes for isopropanol dehydration via pervaporation

Pervaporative poly(vinyl alcohol)/H‐β zeolite mixed matrix membranes for dewatering C2–C3 alcohols

Pervaporation of alcohol–water and dimethylformamide–water mixtures using hydrophilic zeolite NaA membranes: mechanisms and experimental results

Polyol grafted thin film nanocomposite membrane: Enhanced pervaporation performance for isopropanol dehydration

High Performance Zeolite Lta Pervaporation Membranes on Ceramic Hollow Fibers by Dipcoating-Wiping Seed Deposition

Silane-Modified Naa Zeolite/Paas Hybrid Pervaporation Membranes for the Dehydration of Ethanol

Preparation of Stable Multilayer PDMS Composite Pervaporation Membrane Incorporated with In-Situ Transformed Metal Organic Frameworks for Enhanced Butanol Recovery

LTA zeolite membranes on thin-walled capillary tubes for the high-throughput dehydration of industrially important ternary water/isopropanol/epichlorohydrin mixtures

Synthesis of Hierarchical LTA Zeolite Membranes by Vapor Phase Transformation

Progress in pervaporation separation of alcohol-ether and alcohol-ester mixtures

Pervaporation of Ethanol/Water Mixtures with High Flux by Zeolite-Filled Pdms/Pvdf Composite Membranes

Study on pervaporation performance of hydrophobically modified carbon-based membrane materials

(3-Aminopropyl) Triethoxysilane-Modified ZIF-90 Nanoparticle/Polydimethylsiloxane Mixed Matrix Membranes for Ethanol Recovery via Pervaporation

Liquid–liquid interface induced PDMS‐PTFE composite membrane for ethanol perm‐selective pervaporation

Network engineering of organosilica membranes for efficient pervaporation dehydration