PTZ Control System Design Based on MCF5272

CHEN Chun-hui,JI Xiao-yong

DOI: https://doi.org/10.3969/j.issn.1002-2279.2006.05.030

2006-01-01

Microprocessors

Abstract:Based on MCF5272 and uClinux Operating System,this paper introduces how to design the PTZ control system,and implement it in Webcamera.

What problem does this paper attempt to address?

An embedded traffic information collection system based on /spl mu/Clinux

Yu Changhong,Ma Hongqing,Li Peihong,Lai Hongping,Liu Ji-lin

DOI: https://doi.org/10.1109/itsc.2005.1520136

2005-01-01

Abstract:An embedded traffic information collecting system in /spl mu/Clinux environment was developed. The system was mainly comprised of four parts - a camera used to capture the raw traffic video, a piece of DSP 6203B for traffic data processing, a compression module for the purpose of reducing the amount of data before transmitting them through network, and finally, a network module which was used for data transmission.
Design of a Remote Control System for a Camera System Based on EPICS and Web Technology

Zhe Geng,Zhi-yue Wang,Qian Zhang,Ze-yu Zhu,Jia-yao Gu,Zhen-hao Zheng,Lu-cheng Zhu,Kun Ge,Hao Liu,Hong-fei Zhang,Jian Wang

DOI: https://doi.org/10.1117/12.2628783

2022-01-01

Abstract:In order to meet the requirement of scientific camera system with remote control, a set of distributed remote control system is built based on EPICS framework and Web service for a camera system. EPICS provides an implementation framework of distributed soft real-time control system based on Channel Access protocol. A single device control program is named IOC. It's convenient to monitor and maintain the status of devices by operating the interfaces of IOC program, namely Process Variable (PV). This paper mainly discusses the IOC implementation of CCD controller, ion pump controller, vacuum pressure sensor and temperature controller, as well as the construction of Web monitoring platform based on Quasar and Flask framework. At present, the remote control system has been put into CCD290-99 camera named PXE290.
Design and Implementation of IP-Based Embedded Net Camera

Leng Jianqing,Wu Jinyong,Xu Jianjian

DOI: https://doi.org/10.3969/j.issn.1002-7300.2005.06.005

2005-01-01

Abstract:In this paper, the design approach of IP-based Net Camera (IPCAM) powered by Linux OS and a Realtime Mo- tion-JPG Encoder is described. The detail implementation of IPCAM is also been addressed from aspects of hardware frame- work, software design and client. The design methodology of lPCAM's hardware abstract layer makes it easy to migrate to other hardware platform. Compared with analog video camera, IPCAM facilitates Ethernet for video transmission, which a- voids signal fades and provides high efficient vet economical remote surveillance solution.
Design of Video Surveillance and Tracking System Based on Attitude and Heading Reference System and PTZ Camera

Jian Yang,Xiaofang Xie,Yan Wang

DOI: https://doi.org/10.1063/1.4981612

2017-01-01

AIP Conference Proceedings

Abstract:Based on the AHRS (Attitude and Heading Reference System) and PTZ (Pan/Tilt/Zoom) camera, we designed a video monitoring and tracking system. The overall structure of the system and the software design are given. The key technologies such as serial port communication and head attitude tracking are introduced, and the codes of the key part are given.
Real-time Control Photography and Surveillance System by SCM

许敏,李少远

DOI: https://doi.org/10.3969/j.issn.1673-095x.2001.z1.027

2001-01-01

Abstract:Apply to surveillance camera and pan-tilt-zoom electromotor control wi th SCM is presented in this paper. Use the resource of software and hardware abo ut SCM to control surveillance camera and electromotor, control the input and ou tput. The constitution, work elements and design of the control software are foc used in this paper.
The Design and Implementation of MUAV's Digital Control System Based on RTLinux

方舟,李平,韩波

DOI: https://doi.org/10.3969/j.issn.1001-4551.2004.11.016

2004-01-01

Abstract:This paper accounts for the design problem of on-board digital control system for MUAV based on RTLinux. Specially, an effective approach is presented to solve the problem of collecting data from serial ports using interrupt mechanism in user's realtime threads. A reasonable software structure for the control system is also presented ,and the state estimation part has been implemented under RTLinux successfully. The results of on-board tests prove its effectiveness.
Design of Embedded Wireless Network Camera Based on MX27

YU Xue-lian,CHEN Qian,GU Guo-hua

DOI: https://doi.org/10.3969/j.issn.2095-6835.2009.29.027

2009-01-01

Abstract:According to the request of the monitoring sites with difficulty to wire , the embedded wireless network camera system based on H.264 and IEEE802.11g is proposed. In this paper, the hardware structure is described in detail, and the function and the interface circuit of the video collection unit, the main controller unit and the wireless transmission unit is analyzed. The software design process is advised. This system is small, simple, flexible and with wide application.
Fuzzy Pid Control for Intelligent Smartcar System with Ccd Camera

Shaocheng Qu,Yao Tian,Chan Chen

DOI: https://doi.org/10.4028/www.scientific.net/kem.467-469.433

2011-01-01

Key Engineering Materials

Abstract:This paper introduces a design of intelligent smartcar system based on MCU SPCE061A and MCU 89S52. The practical path images are obtained using by the CCD camera, then a double P control method is applied to dynamically adjust steering angle. Based on fuzzy relationship between angle and velocity, the PD controller is proposed to achieve path identification and arbitrary track. Experiments show that the response and stability of the proposed system are excellent.
Controllable Imaging System Design Based on MCU

YAN Hao,CHEN Ze-xiang

DOI: https://doi.org/10.3969/j.issn.1004-373x.2011.02.058

2011-01-01

Abstract:The high-speed and real-time imaging system based on color array CCD sensor was designed,which used CXD3172AR as the core,implemented the standard PAL / NTSC format video output with automatic white balance,auto exposure,blemish compensation and other functions,and constructed an optimized analog front-end circuit(including CDS and AGC) to improve signal to noise ratio of acquisition data.Meanwhile,based on the parameterized control characteristic of DSP chip,the system realized the special communication transfer protocol between DSP and MCU to configure DSP parameters,and controlled various signal processing function through external switches.After simulation and debugging,the circuit achieves good characteristics of acquisition and control.
Optical-mechanical system design of unmanned aerial vehicle polarization CCD camera

YANG Wei-feng,HONG Jin,WANG Yuan-jun,WANG Le-yi,GONG Ping,WANG Feng

DOI: https://doi.org/10.3321/j.issn:1002-1582.2008.03.023

2008-01-01

Optical Technique

Abstract:Three separate and parallel polarization CCD cameras are developed.The design and combination have to satisfy such needs as polarization image and unmanned aerial vehicle environment.The key point is pixel registering each other in three cameras and impact-proof,therefore these effort must be devoted to optics,mechanics as well as assemble.
Design of Target Tracking System Based on CCD Camera

Biao QI,Yang LIU,Yu RAO,Lu HUN,Sheng QIANG

DOI: https://doi.org/10.3969/j.issn.1003-7241.2017.09.026

2017-01-01

Abstract:Target servo control system is a kind of automatic control system,and tracking technology has been a hot research field.This paper uses the kemel camera image real-time collecting and measuring system for the K60 microprocessor.Mainly Sony CCD camera is used as a position sensor,and the output of the video signal is converted into a digital signal by external ADC,it is transmitted to K60 MCU that completes image acquisition and image processing work,and drives the two-axis electric PTZ to rotate to current location according to the error of target position in the image.The equipment consists of image acquisition and image processing system,servo control system,communication system.
Field Video Acquisition Module Design Based on ARM

He Peng,Mi Haibin,Yang Man,Luo Yunyou

DOI: https://doi.org/10.3969/j.issn.1003-188x.2015.04.054

2015-01-01

Abstract:Developed a agricultural video monitoring system , which USES the master control chip for FL 2440 S3 C2440 development board and chip is Z 301 USB camera to constitute the hardware platform of the module .This module is to the embedded Linux kernel cutting , making and burning;And the USB camera driver , video collection procedures , LED re-al-time display program and network transmission of the description of the design process in detail , and has carried on the module in the farmland of the scene debugging .The field of video acquisition module cost is low , good stable per-formance , low power consumption , it collected video image can not only display on the LED , but also through the net-work transmission program transmitted to a PC for display , they are shown in the video image is very clear and coherent , very accord with the demand on geographical environment , so as to achieve Agricultural informatization .
Implementation of Remote and Cooperative Multi -Camera Control

Zheng Liu

2004-01-01

Abstract:The applications of web - based video surveillance were widely used for the Internet developed and spread widely. Nowadays the technology of remote surveillance based on internet technology using single camera has matured. But multiple cameras applications are still in research. In this paper, we put forward the demand of remote video surveillance in remote manufacturing and the method of cameras cooperative control and design of pair - cameras tracker based on internet are in discussion.
Remote Video Surveillance and Control System Based on GO7007SB

YANG Yu-liang,WANG Liu-yi

DOI: https://doi.org/10.3969/j.issn.1002-8692.2006.06.028

2006-01-01

Abstract:The system adopts the platform of encode and control based on the S3C4510B and the video encoding chip GO7007SB from WIS Company.It achieves video encoding to MPEG-4 and transmission on the Internet.It also can receive and deal with the control signals from six UARTs.The remote PC receives the video signals for surveillance,and configures the size,frame rate and format of the video through real time controlling signals.Actual testing shows that the system has the advantages of consummate functions,stable performance and agile configuration.
Research on Video Image Processing System Based on Ucos -Ⅱ

LI Ji-kui,XIANG Huai-kun,HU Hong,CAO Quan,LIU Jian-wei

DOI: https://doi.org/10.3321/j.issn:0367-6234.2007.02.035

2007-01-01

Abstract:This paper presents a research and development project of the embedded video dynamic traffic image gathering and processing system based on uCOS-II operating system.The main characteristics of the core parts of an apparatus Ti5416DSP and the embedded real-time operating system uCOS-II are introduced.Then,the key problems of this system's RD are discussed in detail.The frame chart of hardware design is given,and the working steps of gathering the video dynamic traffic images are discussed based on uCOS-II.Finally,the system's software realization is introduced.
A Small Intelligent Car System Based on Fuzzy Control and Ccd Camera

Shaocheng Qu,Yao Tian,Chan Chen,Lin Ai

DOI: https://doi.org/10.1504/ijmic.2012.043940

2012-01-01

International Journal of Modelling Identification and Control

Abstract:A small intelligent car system based on MCU SPCE061A and MCU 89S52 was introduced. Firstly, CCD camera was used as its path recognition device to extract path information through image recognition. Based on fuzzy strategy and the least square method, two-dimensional information involving gear angle between the car and the path was measured. Then fuzzy PD controller was implemented based on MCU, which can guarantee to track accurately. Finally, experiment results are given to demonstrate that the designed system can track random path at smooth speed, and the overall system is stable and accurate.
Design of Smart Home Monitoring System Based on Cortex-M3

LI Jiang-quan,ZHANG Xing-gan

DOI: https://doi.org/10.3969/j.issn.1004-373x.2012.07.014

2012-01-01

Abstract:A kind of smart home monitoring system,which took Cortex-M3 micro-controller as the core,μC / OS-Ⅱ as the real-time operating system,JN5139 module as the node,is described in this paper.This system used 3G wireless communication technology and Web servers to achieve remote monitoring and management.The architecture design of the hardware and software is presented.Also,the key technologies are illustrated.With the characteristics of low-power,low-cost,steady performance and expandability,this system has a wide application prospect.
Design of Fuzzy Adaptive Controller for Small Smart Car System Via CCD Camera

Shaocheng Qu,Lin Ai,Yao Tian,Haiyan Liu

2010-01-01

Abstract:An small smart car system based on MCU SPCE061A and MCU 89S52 was presented. CCD camera was used as its path recognition device to extract path information through image recognition. Based on fuzzy strategy and the least square method, two-dimensional information involving gear angle between the car and the path were measured. Then PD controller was implemented to adaptively control the DC motor, which can guarantee the accurate path trace. Finally, experiment results show that the affectivity of the proposed small smart car.
Design of Linear CCD Signal Collection System Based on ARM7

Li CHEN,Jie ZOU,Yong-zhi LIU,Zai-chuan LONG

DOI: https://doi.org/10.3969/j.issn.1001-5868.2007.06.037

2007-01-01

Abstract:The design of a new type linear CCD signal collection system is described, the core of which is ARM7 microcontroller LPC2148 and the system includes a CCD signal processor AD9826. The timing of AD9826 and linear CCD image sensor is generated by LPC2148, which also sends the collected data to PC through USB, the reception software on PC can display the magnitude of light intensity at CCD image sensor's every pixel in the form of coordinates. This system can not only control and drive linear CCD sensor and circuits smoothly but also collect the output signal of linear CCD sensor. It minimizes the CCD signal collection circuits, simplifies the structure of circuits and cuts down the cost of design.
Design of the Remote Monitoring System Based on Embedded Linux

LIU Bin,ZHU Yan-xiang,JIANG Tian-qi

2013-01-01

Abstract:This system adopts ARM kernel S3C2410 as its CPU, the server program runs under the embedded Linux system plat-form, images is captured by ZC301 camera. In this paper, a C/S remote monitoring system based on embedded web server is de-signed with combining embedded Linux OS and image disposing technology transport by the web.

PTZ Control System Design Based on MCF5272

An embedded traffic information collection system based on /spl mu/Clinux

Design of a Remote Control System for a Camera System Based on EPICS and Web Technology

Design and Implementation of IP-Based Embedded Net Camera

Design of Video Surveillance and Tracking System Based on Attitude and Heading Reference System and PTZ Camera

Real-time Control Photography and Surveillance System by SCM

The Design and Implementation of MUAV's Digital Control System Based on RTLinux

Design of Embedded Wireless Network Camera Based on MX27

Fuzzy Pid Control for Intelligent Smartcar System with Ccd Camera

Controllable Imaging System Design Based on MCU

Optical-mechanical system design of unmanned aerial vehicle polarization CCD camera

Design of Target Tracking System Based on CCD Camera

Field Video Acquisition Module Design Based on ARM

Implementation of Remote and Cooperative Multi -Camera Control

Remote Video Surveillance and Control System Based on GO7007SB

Research on Video Image Processing System Based on Ucos -Ⅱ

A Small Intelligent Car System Based on Fuzzy Control and Ccd Camera

Design of Smart Home Monitoring System Based on Cortex-M3

Design of Fuzzy Adaptive Controller for Small Smart Car System Via CCD Camera

Design of Linear CCD Signal Collection System Based on ARM7

Design of the Remote Monitoring System Based on Embedded Linux