Abstract:This paper made a revisit on the contact behavior and application of a beam (rail) on a half-plane/half-space. It is found that when the beam is subjected to a concentrated force, the shear deformation of the beam must always be considered, because the deformation only occurs within a limited length of the beam. The second finding of this paper is that the reactions and the surface settlements of the half-plane/half-space are significantly affected by the load position on the cross-section of the beam (on the top of rail in the concerned areas of application) and must be considered in practice. The Flamant/Boussinesq solutions are used to establish integral equations for the surface settlement of the half-plane/half-space below the beam. The Fourier Transform is applied to the first derivative of these integral equations and to the differential equations of the Timoshenko beam. Solving these two equations and employing the inverse Fourier Transform, the deflection and the reaction can be obtained in a compact format. After dispersing the wheel pressure on top of the rail to the centroid, the deflection and reaction are in agreement with the finite element analysis. Finally, simplified equations for equivalent bearing lengths are proposed. Nonuniform distribution of the reactions along the width of the beam is treated by using an equivalent uniform width. If the shear deformation is ignored, the problem becomes the classic one solved by Biot (J Appl Mech 4:A1–A7, 1937). Compared with Biot solution, the current way of solution is compact, their minor differences are the characteristic length. The current solution is a fourth root while the Biot solution is a cube root.

NONLINEAR STABILITY CONSIDERATIONS IN THERMOELASTIC CONTACT MODEL WITH TWO DIFFERENT BOUNDARY CONDITIONS

Stability and bifurcation analysis of a free boundary problem modelling multi-layer tumours with Gibbs–Thomson relation

THE SOLVABILITY FOR NONLINEAR SINGULARLY PERTURBED DIFFERENTIAL SYSTEM

Numerical Analysis of a Dynamic Contact Problem with History-Dependent Operators

Analysis of Two Quasistatic History-Dependent Contact Models

A bi-Helmholtz type of two-phase nonlocal integral model for buckling of Bernoulli-Euler beams under non-uniform temperature

One-dimensional stress-driven nonlocal integral model with bi-Helmholtz kernel: Close form solution and consistent size effect

Theeffectofnon-linearinteractionbetweengasandparticlevelocitiesonthe Hydrodynamicstabilityintheblasiusboundarylayer

Contact Behavior Between Rail and Elastic Foundation

Stability of Atomic Simulations with Matching Boundary Conditions

A Method for the Analysis of Dynamic Response of Structure Containing Non-Smooth Contactable Interfaces

Continuous Dependence and Optimal Control of a Dynamic Elastic-Viscoplastic Contact Problem with Non-Monotone Boundary Conditions

Continuum models for the contact line problem

Nonlinear Aero-Thermo-Elastic Stability Analysis of a Curve Panel in Supersonic Flow Based on Approximate Inertial Manifolds

Derivation of Continuum Models for the Moving Contact Line Problem Based on Thermodynamic Principles

Duality Arguments in the Analysis of a Viscoelastic Contact Problem

Numerical Analysis of a Thermal Frictional Contact Problem with Long Memory

Numerical analysis of a history-dependent variational-hemivariational inequality for a viscoplastic contact problem

Axisymmetric necking versus Treloar-Kearsley instability in a hyperelastic sheet under equibiaxial stretching

Numerical Analysis of a Dynamic Viscoplastic Contact Problem.

Numerical Analysis of a Viscoplastic Contact Problem with Normal Compliance, Unilateral Constraint, Memory Term and Friction