Abstract:<p>In the printing quality inspection, measuring the primary color ink content of printed products is an important link. In order to obtain accurate measurement results in the ink content measurement system, this study preprocesses the interference information such as stray light and noise in the collected ink content spectrum information of cyan, magenta, and yellow samples firstly. Considering the limited denoising ability of common filtering methods in the frequency domain, a composite filtering method combining median filtering and wavelet transform is introduced to preprocess the collected spectral signal. The system not only suppressed the random interference, but restored original signal well. Then, considering that there are many redundant data in full-wavelength spectral reflectance data, the Successive Projections Algorithm (SPA) and Competitive Adaptive Reweighted Sampling (CARS) algorithm were used to extract characteristic wavelengths from the preprocessed information. After extracting the characteristic wavelengths, the primary color ink content prediction models were built based on the Partial Least Squares Regression (PLSR) and Support Vector Regression (SVR) algorithms. The test results show that SVR models based on SPA and CRAS feature extraction algorithms have better prediction effect than PLSR models. Among them, CARS-SVR algorithm models have the best prediction effect, and the modeling wavelengths of three primary color samples decreases by 82.75%, 69.25% and 90.50%, compared with the whole wavelengths. The Cross-Validation Root Mean Square Error (RMSECV) and coefficient of determination (R<sup>2</sup>) of CARS-SVR content prediction models are 0.0256, 0.0182, 0.0249 and 0.9931, 0.9966, 0.9936, respectively. The system showed better measurement accuracy.</p>

Spectral-Based Color Separation Method for A Multi-Ink Printer

Color Separation Criteria for Spectral Multi-Ink Printer Characterization

Adaptive Characterization Method for Desktop Color Printers

Spectral Characterisation of Colour Printer Based on A Novel Grey Component Replacement Method

Novel Spectral Characterization Method for Color Printer Based on the Cellular Neugebauer Model

Printer forensics based on character image quality measures

Optimizing the Spectral Characterisation of a CMYK Printer with Embedded CMY Printer Modelling

Color representation of textile fabric using multispectral imaging technology

A Color Separation Algorithm with Multi-Levels Grayscale for Glass Printing

Spectral Characterization of A Color Scanner by Adaptive Estimation

Estimation of Spectral Reflectance Using Color Scanner

A Transparency Channel Involved Color Separation Algorithm for Glass Printing

Empirical Model for Matching Spectrophotometric Reflectance of Yarn Windings and Multispectral Imaging Reflectance of Single Strands of Yarns.

Colorimetric and Spectral Characterization of A Color Scanner Using Local Statistics

Development of a quantitative method to evaluate the printability parameters of water-based ink using visible and near infrared spectroscopy

A Multispectral Imaging Approach to Colour Measurement and Colour Matching of Single Yarns Without Winding

Maintaining Accuracy of Cellular Yule-Nielsen Spectral Neugebauer Models for Different Ink Cartridges Using Principal Component Analysis

Recolouring Digital Textile Printing Design with High Fidelity

Research on the measurement method of printing ink content based on spectrum

Free-form Surface-Oriented Five-Axis Single-Point Color Printing Technology.

Color contoning for 3D printing