Application of Fault-tolerant Technology in PACS/RIS

Wei-hua TAN,Xiao-fen WU,Xin GE,Jian-rong XU

DOI: https://doi.org/10.3969/j.issn.1674-1633.2009.12.014

2009-01-01

Abstract:Fault-tolerant technology is the important assurance of the stable,reliable,effective and sustained operation of computers. Combining with the actual situation in our department,this paper introduces the principle and application of fault-tolerant technology.

What problem does this paper attempt to address?

Designing and Implementation of a PACS

Hai-yan Zhou,Xing Yao,Yue-ming Zhu,Hui-long Duan,Xu-dong Lu,Chen-hui Zhao

DOI: https://doi.org/10.3969/j.issn.1671-7104.2006.06.010

2006-01-01

Abstract:PACS (Picture Archiving and Communication System) is successfully applied in Huzhou Central Hospital, and is well integrated with its HIS system by WEBSERVICE middleware. The system supports DICOM 3.0 Standard, and DICOM gateways are installed for modalities that do not support DICOM so as to have implemented the digitalization of all the image departments in the hospital.
Survey on Fault-Tolerant Techniques for Power Electronic Converters

Wenping Zhang,Dehong Xu,Prasad N. Enjeti,Haijin Li,Joshua T. Hawke,Harish S. Krishnamoorthy

DOI: https://doi.org/10.1109/tpel.2014.2304561

IF: 5.967

2014-01-01

IEEE Transactions on Power Electronics

Abstract:With wide-spread application of power electronic converters in high power systems, there has been a growing interest in system reliability analysis and fault-tolerant capabilities. This paper presents a comprehensive review of conventional fault-tolerant techniques regarding power electronic converters in case of power semiconductor device failures. These techniques can be classified into four categories based on the type of hardware redundancy unit: switch-level, leg-level, module-level, and system-level. Also, various fault-tolerant methods are assessed according to cost, complexity, performance, etc. The intent of this review is to provide a detailed picture regarding the current landscape of research in power electronic fault-handling mechanisms.
Study on Fault-Tolerant Based on Modular Method in the Development of Test and Control System Software

PANG Mao,ZHOU Xiao-jun,HU Hong-wei,MENG Qing-hua

DOI: https://doi.org/10.3969/j.issn.1004-1699.2006.02.066

2006-01-01

Abstract:Software development based on modular method can improve the reuse rate of the code, but the possibility increases that the same faults occur in each system. In order to improve the reliability of software, Fault-tolerant is applied to the development of test and control system software based on modular method. According to the characteristic of these systems, the method of fault-avoiding and fault-tolerant is discussed from four aspects: data, operation, hardware and software. The application in the software of the driving-axle synthesis performance test bed that we developed indicates that it can raise the reuse rate of the code, reduce the development period, and also improve the reliability of the software obviously.
Complete Continuous-Availability PACS Archive Server Solution

Z Zhou,F Cao,BJ Liu,HK Huang,J Zhang,X Zhang,G Mogel

DOI: https://doi.org/10.1117/12.481938

2003-01-01

Abstract:Failure of PACS archive server would cripple the entire PACS operation. Last year we demonstrated that it was possible to design a fault-tolerant (FT) server with 99.999% uptime. The FT design was based on a triple modular redundancy with a simple majority vote to automatically detect and mask a faulty module. The purpose of this presentation is to report on its continuous developments in integrating with external mass storage devices, and applying as an Application Service Provider (ASP) back-up archive server. ASP back-up archive is to provide instantaneous automatic backup of PACS image data and instantaneous recovery of PACS image data in the event of disaster. FT server is used as an off-site backup-archive PACS server from the main PACS archive location. Clinical data from a hospital PACS is sent to the FT server in parallel to the exams being archived in the main server. A disaster scenario is simulated and the PACS data is sent from the offsite FT server back to the hospital PACS. The reliability, functionality and performance of the FT server and external mass storage devices are evaluated during the simulation.
Research on Fault Tolerance in Hybrid P2P-based Collaborative Systems

Hao Fu,Ming Cai,Wenmin Zhu,Zhongdong Huang,Jinxiang Dong

DOI: https://doi.org/10.1109/CSCWD.2007.4281405

2007-01-01

Abstract:Hybrid P2P technique recently has become more and more popular for collaborative systems. However, reliability is issue of major importance in the server end of these systems. TMR technique for Collaborative System (CS-TMR) is presented in this paper to improve the server reliability. This software schema incorporates three homogeneous microcomputers and provides the fault-tolerant function through package interfaces to server applications. As it is COS-based, the method is more general-purpose, and programmers need not pay too much attention to the fault tolerance technology in detail. This method helps the collaborative server work in normal and degraded (duple or even single modular) modes, and can tolerate transient or permanent faults. Meanwhile, due to the importance of the server in hybrid P2P server, server application upgrade is impossible without server stop. A novel seamless software upgrade method is brought forward through the intelligent state-transition-control in CS-TMR package to reduce the cost of software upgrade.
Common Malfunctions and Solutions of PACS/RIS in Clinical Application

XIE Ming-wei,HU Hui-jun,XU Jian-min,LIANG Bi-ling

DOI: https://doi.org/10.3969/j.issn.1674-1633.2013.12.034

2013-01-01

Abstract:Objective To summarize the malfunctions frequently occurring during the clinical application of Picture Archiving and Communication Systems(PACS) & Radiology Information System(RIS) and corresponding solutions.Methods PACS/RIS(GE Centricity Enterprise V3.0) is built up with the local area network in the hospital,recording malfunctions and corresponding solutions during its application.Results To solve those common malfunctions concerning PACS,HIS(Hospital Information System)and hardware devices,it is of great necessity for staff in Department of Radiology to record them,then exclude the possibilities one by one and initiate the emergency plan so as to ensure the continuation of diagnostic work.Conclusion Stable and efficient operation of PACS/RIS is pivotal to the daily diagnostic work for Department of Radiology.
The technology of storage in PACS system

Tian Jin,Xu Feng

DOI: https://doi.org/10.3969/j.issn.1672-8270.2005.12.017

2005-01-01

Abstract:The project of PACS is one of the important parts in the construction of E-hospital.As the necessary part,type choosing and building of the storage unit can affect the PACS performance and the investment of hospitals.This paper em-phasizes the technology of storage in PACS system.And the writer wants to give some help to the hospitals which are going to build their PACS.
Rebuilding and Application of Hospital Image Storage System Based on Image Cloud Storage

Xiaofen WU,Ningxin DONG,Decheng LI,Jin ZHOU,Yunlu ZHENG,Peijun WANG

DOI: https://doi.org/10.3969/j.issn.1674-1633.2018.09.035

2018-01-01

Abstract:Objective In order to save hospital physical storage space and ensure the security, integrity and permanence of hospital image data storage, the traditional NAS server storage structure is replaced by a cluster object cloud storage architecture. Methods According to the construction principle of "top layer design, step by step implementation", the existing PACS system data of Tongji Hospital were archived management and disaster recovery through cloud storage, and the future permanent data storage management was planned. Results Two sets of image backup systems based on near line storage were built between two buildings in the hospital to back up for each other, one of which was primary used and the other was backup. Conclusion Cloud storage meets the rapid expansion of hospital image storage, high security and high availability of data storage, and truly achieves "all data, forever preservation".
Function testing and upgrade solution of PACS

Luo Min,Wang Weiqi,Yu Jianguo,Wang Xiaolin,Wang Kang,Lei Wenyong,Luo Fazhan

DOI: https://doi.org/10.3321/j.issn:0254-3087.2006.z1.014

2006-01-01

Abstract:To work over the performance parameters of each function in a PACS when it is running smoothly,so that we can find the advantageous data base and proper solutions for evaluation of systemic stability and data reliability.Test the existing Medical Picture Archiving and Communication Systems for the performance parameters of each function,then the final statistical data can be approached combined with the hospital's own growth situation.We can find the solutions and the fine design to improve systemic stability and reliability after taking into account with all the data from testing,statistics result,existing issue and so on.Introduce the experience about system construction and application of PACS by our practical application and the real data from system testing,which can certainly be a study resource for success in PACS future application.
Preliminary Research on Quality Control of PACS Image Display Device

Min ZHOU,Min-ming ZHANG,Wen-bo XIAO

DOI: https://doi.org/10.3969/j.issn.1002-1671.2005.09.024

2005-01-01

Abstract:Objective To study the quality assurance(QA) and quality control(QC) of PACS image display device in the department of radiology equipped with PACS and radiology information system (RIS). Methods Routine maintenance and periodic calibration were performed using photometer and automatic calibration software according to American Association of Physicists in Medicine Task Group 18 (AAPM TG18) test patterns and evaluating criterion. Digital image and communication in medicine (DICOM) gray scale standard display function (GSDF) standard calibration ,maximum luminance and minimum luminance,luminance uniformity,display resolution and geometry distortion adjustment were performed quarterly on BARCO CRT displays. Results All the results were well conformed to the criteria recommended by the AAPM TG18. About 95 percents of radiological images were interpreted on the PACS diagnostic image display.Conclusion The QC program of PACS image display device is an essential to ensure high-quality in digital medical environment.
Trends in PACS image storage and archive

B J Liu,F Cao,M Z Zhou,G Mogel,L Documet

DOI: https://doi.org/10.1016/s0895-6111(02)00090-3

Abstract:PACS is widely used in hospitals and is considered a mission critical system for around-the-clock daily clinical operation. Scheduled or unscheduled downtime of the main PACS archive storage or server could potentially cripple the entire PACS operation. This is especially the case in a filmless hospital environment. Therefore, in a downtime event, it is most desirable for users to have only a minimal performance impact without interruption of clinical data flow or loss of data and to have available historical PACS studies. This paper summarizes some of the developments in the design and implementation of a reliable PACS that insures maximum uptime for end users while preserving the integrity of the PACS data and making it available during downtime events. It also details strategy for developing proper clinical workflow contingency procedures when a scheduled downtime event to the main archive storage and server occurs. Specifically, the design and implementation of a fault-tolerant (FT) main archive server, the development of a FT back-up archive using an application service provider (ASP) model, and the clinical experiences while upgrading a main archive server and migrating the stored PACS data to new storage media will be discussed.
Software Fault-tolerant Technology Application in Video Supervision System

BAO Jian,JI Chang-peng,LI Yi-jie

DOI: https://doi.org/10.3969/j.issn.1673-629X.2005.07.035

2005-01-01

Abstract:The modern video supervision system is a highly integrated system,carries on accurate and prompt conveyance and treatment to various kinds of data.It is an outstanding request for the video supervision system.Through the software fault-tolerant technology,have realized the solution of the video supervision system.Have studied the basic principle and characteristic of the software fault-tolerant technology,software fault-tolerant basic method to RB,NVP and unusual treatment technology,and realized the relevant technical support that needed by the software fault-tolerant.It is in application for software fault-tolerant technology can assure the dependability of system effectively at video supervision system.The scheme of this text can be popularized to the relevant control systems.
Design and implementation of disaster recovery and business continuity solution for radiology PACS

Bahar Mansoori,Beverly Rosipko,Karen K Erhard,Jeffrey L Sunshine

DOI: https://doi.org/10.1007/s10278-013-9625-4

Abstract:In the digital era of radiology, picture archiving and communication system (PACS) has a pivotal role in retrieving and storing the images. Integration of PACS with all the health care information systems e.g., health information system, radiology information system, and electronic medical record has greatly improved access to patient data at anytime and anywhere throughout the entire enterprise. In such an integrated setting, seamless operation depends critically on maintaining data integrity and continuous access for all. Any failure in hardware or software could interrupt the workflow or data and consequently, would risk serious impact to patient care. Thus, any large-scale PACS now have an indispensable requirement to include deployment of a disaster recovery plan to ensure secure sources of data. This paper presents our experience with designing and implementing a disaster recovery and business continuity plan. The selected architecture with two servers in each site (local and disaster recovery (DR) site) provides four different scenarios to continue running and maintain end user service. The implemented DR at University Hospitals Health System now permits continuous access to the PACS application and its contained images for radiologists, other clinicians, and patients alike.
PACS Based on Technologies of Image Code and Transmission

Wu Chang,Kebin Jia,Hongyuan Zhang

DOI: https://doi.org/10.3969/j.issn.1000-8829.2001.05.006

2001-01-01

Abstract:PACS plays an important role on diagnosis and treatment and its importance has been recognized.Because some key technologies have not achieved,it is still in initial phase in our country.A PACS that uses lossless compression and image transmission technologies is presented.The architecture,store strategy,and standards have been described.A lossless compression method based on the features of medical image and the method of image transmission based on TCP/IP is mainly discussed.Its actual run results show that design is reasonable,compression method has better result to medical image and transmission method can better supports point to many point communication between server and stations.
Study on Reliability of PACSs with Integrated Consideration of Both Basic and Mission Reliability

Xinzhi Chen,Long Jin

DOI: https://doi.org/10.3390/en17020365

IF: 3.2

2024-01-11

Energies

Abstract:Protective relays play a fundamental role in power systems, whose functions consist of three parts, namely protection, automation, and control, thus called the PAC altogether. It turns out that the architecture of a PACS (protection, automation, and control system) may exert a direct impact on the reliability of protective relay systems, previous studies of which are often conducted on the assumption that intelligent electronic devices (IEDs) have a constant fault rate with only mission reliability of the systems considered. To obtain a more accurate evaluation of system reliability bearing system maintenance in mind, this article proposes a novel method to appraise the reliability of PACSs with integrated consideration of basic and mission reliability. Firstly, the basic reliability of IEDs is calculated by parts count prediction, which will provide a more precise fault rate of IEDs. Secondly, the reliability of PACSs is analyzed by the reliability diagram and Markov model. By using the parts count prediction method to calculate the failure rate of the device, the steady-state probability rate will be accurate more than 0.0107%. At last, a quantitative criterion is finalized for selecting a suitable architecture easily.

energy & fuels
Fault -Tolerance Strategy Based on Internet

LI Jian-jun,GAO Wei,MIAO Cun-meng

DOI: https://doi.org/10.3969/j.issn.1007-9831.2006.01.012

2006-01-01

Abstract:The need for highly secure,highly dependable computer systems is acute in today's world.Investigates the computer fault-tolerance analysis both from the side of softwares and the side of hardwares,indicating comprehension of fault-tolerance at design and realization computer netware.
Development and Management of PACS System

LUO Min

DOI: https://doi.org/10.3969/j.issn.1674-1633.2005.04.001

2005-01-01

Abstract:Objective To investigate the application and management of the PACS.Method PACS was synthetically managed according to the analysis based on application report.An advanced PACS was set up to fully meet the high standard requirement of E-hospital.It is the good foundation for advanced application was build to realize sharing and transmission of image,information,and patient data within the hospital.It is the base of establishing the standardizing management of the hospital.Results Better understanding of the role of PACS ystem in hospital helps to design mode of work suitable for the actual situation.Conclusions In a new information century,we must push the development of PACS across the healthcare enterprise,which is a vital part of digital hospital.
Research of Fault-tolerance Technique of Integrated Avionics Core Processor System

ZANG Hong-wei,LIU Yi,XIE Ke-jia,GAO De-yuan

DOI: https://doi.org/10.3969/j.issn.1000-7180.2006.05.054

2006-01-01

Abstract:A future avionics will be a highly integrated, modularized system, running on its platform called Integrated Core Processor System (ICPS), which is real time distributed computing system integrated with data processing, signal processing and graphic processing. In order to meet the reliability requirement, fault tolerance techniques are generally used in designing the ICPS. This paper describes the hardware and software structure of the IPCS system, and presents the fault-tolerance management strategies and an example of the process of the fault monitoring, fault processing and system reconfiguring.
[Some Technical Problems in Setting Up Hospital PACS].

Qing-hua He,Jian-hua Hu,Xiao-guang Ou,Jing Wu,Zhi-xiong Huang

DOI: https://doi.org/10.3969/j.issn.1001-5329.2002.08.013

2002-01-01

Abstract:Having introduced PACS in brief, this paper presents some technical problems such as the selection of scale, function, database and monitor. And many solutions for these problems are given and compared with each other.
The Data Storage Grid: the Next Generation of Fault-Tolerant Storage for Backup and Disaster Recovery of Clinical Images

NE King,B Liu,Z Zhou,J Documet,HK Huang

DOI: https://doi.org/10.1117/12.594629

2005-01-01

Abstract:Grid Computing represents the latest and most exciting technology to evolve from the familiar realm of parallel, peer-to-peer and client-server models that can address the problem of fault-tolerant storage for backup and recovery of clinical images. We have researched and developed a novel Data Grid testbed involving several federated PAC systems based on grid architecture. By integrating a grid computing architecture to the DICOM environment, a failed PACS archive can recover its image data from others in the federation in a timely and seamless fashion. The design reflects the five-layer architecture of grid computing: Fabric, Resource, Connectivity, Collective, and Application Layers. The testbed Data Grid architecture representing three federated PAC systems, the Fault-Tolerant PACS archive server at the Image Processing and Informatics Laboratory, Marina del Rey, the clinical PACS at Saint John's Health Center, Santa Monica, and the clinical PACS at the Healthcare Consultation Center II, USC Health Science Campus, will be presented. The successful demonstration of the Data Grid in the testbed will provide an understanding of the Data Grid concept in clinical image data backup as well as establishment of benchmarks for performance from future grid technology improvements and serve as a road map for expanded research into large enterprise and federation level data grids to guarantee 99.999 % up time.

Application of Fault-tolerant Technology in PACS/RIS

Designing and Implementation of a PACS

Survey on Fault-Tolerant Techniques for Power Electronic Converters

Study on Fault-Tolerant Based on Modular Method in the Development of Test and Control System Software

Complete Continuous-Availability PACS Archive Server Solution

Research on Fault Tolerance in Hybrid P2P-based Collaborative Systems

Common Malfunctions and Solutions of PACS/RIS in Clinical Application

The technology of storage in PACS system

Rebuilding and Application of Hospital Image Storage System Based on Image Cloud Storage

Function testing and upgrade solution of PACS

Preliminary Research on Quality Control of PACS Image Display Device

Trends in PACS image storage and archive

Software Fault-tolerant Technology Application in Video Supervision System

Design and implementation of disaster recovery and business continuity solution for radiology PACS

PACS Based on Technologies of Image Code and Transmission

Study on Reliability of PACSs with Integrated Consideration of Both Basic and Mission Reliability

Fault -Tolerance Strategy Based on Internet

Development and Management of PACS System

Research of Fault-tolerance Technique of Integrated Avionics Core Processor System

[Some Technical Problems in Setting Up Hospital PACS].

The Data Storage Grid: the Next Generation of Fault-Tolerant Storage for Backup and Disaster Recovery of Clinical Images