Abstract:Hydrogen is at the forefront of clean energy use and storage in the goal to drastically reduce anthropogenic carbon dioxide and combat global climate change. However, hydrogen production to-date is accomplished via steam methane reforming which, for every ton of hydrogen produced 5.5 tons of CO 2 is liberated. One viable technical solution for production of clean hydrogen is water electrolysis. To this end DOE has implemented the Hydrogen Earthshot initiative to cleanly produce hydrogen at 2 /kg by 2030. Of the several commercial water electrolysis technologies available, proton exchange membrane water electrolysis (PEMWE) currently offers the most benefits including operations at low temperature, differential pressure, and high current density (≥3 A/cm 2 ). Commercialization of PEMWE has advanced rapidly despite several significant disadvantages which include the necessity of scarce expensive platinum-group metal (PGM) catalysts, expensive perfluorinated membranes, and significant environmental impacts of perfluorinated alkyl substances (PFAS) used in membrane production. The solution to these challenges is the development of alkaline exchange membrane water electrolysis (AEMWE) which retains the advantageous characteristics of PEMWE without the need for PGM catalysts or perfluorinated membranes. Here in, we report on our current progress of AEMWEs, which covers PGM-free catalyst development, low-cost and durable AEM development and electrode design development. From a commercial point of view, given a high-performance durable membrane, manufacturing MEAs is a critical next step toward commercialization. Therefore, development of an AEM with accessible thermal transitions prior to the onset of quaternary ammonium degradation is key to enabling proven MEA fabrication techniques such as hot-pressing and decal transfer of electrodes. Through a novel synthetic approach, we will describe the preparation of functionalized copolymers and terpolymers containing latent cross-linking functionality. Ultimately, we will demonstrate the manufacturability of MEAs from our PGM-free catalysts and membrane materials employing hot-pressing and decal transfer of electrodes along with single cell evaluations. We will also discuss factors that affect the degradation of AEMWEs and solutions to address these challenges.

Development and Test of 5 MPa High Pressure Proton Exchange Membrane Water Electrolysis System

Design and Economic Analysis of High-Pressure Proton Exchange Membrane Electrolysis for Renewable Energy Storage

Experiments and Microsimulation of High-Pressure Single-Cell PEM Electrolyzer

High-pressure proton exchange membrane water electrolysis: Current status and challenges in hydrogen production

Catalyst-coated proton exchange membrane for hydrogen production with high pressure water electrolysis

In-situ Investigation of Bubble Dynamics and Two-Phase Flow in Proton Exchange Membrane Electrolyzer Cells

Recent advances in proton exchange membrane water electrolysis

Three-dimensional Numerical Simulation of Bubble Dynamics and Design Optimization of Microchannel in Proton Exchange Membrane Water Electrolyzers

Comprehensive study and optimization of membrane electrode assembly structural composition in proton exchange membrane water electrolyzer

High-pressure PEM water electrolyser performance up to 180 bar differential pressure

Efficient and Stable Proton Exchange Membrane Water Electrolysis Enabled by Stress Optimization

Low hydrogen permeability and high durability proton exchange membrane with three-dimensional acid-base crosslink structure for water electrolysis

Three-Dimensional Numerical Simulation of the Performance and Transport Phenomena of Oxygen Evolution Reactions in a Proton Exchange Membrane Water Electrolyzer

Engineering of Electrodes and Operating Conditions for Pure-Water-Fed Anion Exchange Membrane Water Electrolyzers

Advances in Oxygen Evolution Electrocatalysts for Proton Exchange Membrane Water Electrolyzers

One‐Step Fabrication of Ultralow Pt Loading High Efficiency Proton Exchange Membrane for Water Electrolysis by Conventional E‐Beam Metal Deposition

High Performance Anion Exchange Membrane Electrolysis Using Plasma-Sprayed, Non-Precious-Metal Electrodes

Pulsed Dynamic Electrolysis Enhanced PEMWE Hydrogen Production: Revealing the Effects of Pulsed Electric Fields on Protons Mass Transport and Hydrogen Bubble Escape

Investigation on the Microfluidics in PEM Water Electrolyzers

Porous Transport Layers for Proton Exchange Membrane Electrolysis Under Extreme Conditions of Current Density, Temperature, and Pressure

(Invited) Progress and Perspective Towards Low-Cost High-Performance Anion Exchange Membrane Water Electrolysis