Abstract:A major problem in membrane technology for applications such as wastewater treatment or desalination is often the loss of membrane permeability due to biofouling initiated froth protein adsorption and biofilm formation on the membrane surface. In this study, we developed a relatively simple and yet versatile approach to prepare polypropylene (PP) membrane with highly effective non-biofouling performance. Copolymer brushes were grafted to the surface of PP membrane through UV-induced polymerization of two oppositely charged monomers, i.e., [2-(methacryloyloxy)ethyl]trimethylammonium chloride (TM) and 3-sulfopropyl methacrylate potassium salt (SA), with varying TM:SA molar ratios. Surface analysis with scanning electron microscope (SEM) clearly showed the grafted copolymer brushes on the membrane surfaces and that with X-ray photoelectron spectroscope (XPS) revealed a similar TM:SA ratio of the grafted copolymer brushes to that of the monomer solution used for the polymerization. Water contact angle measurements indicated that the hydrophilicity of the membrane: surfaces was remarkably improved by the grafting of the TM/SA copolymer brushes, with the lowest water contact angle of 27 degrees being achieved at the TM:SA ratio of around 1:1. Experiments for antiprotein adsorption with bovine serum album (BSA) and lysozyme (LYZ) and antibiofilm formation with Escherichia coli (E. coli) demonstrated a great dependence of the membrane performance on the TM:SA ratios of the grafted copolymer brushes. It was found that the characteristics of the surface charges of the membrane surfaces played a very important role in the non-biofouling performance, and the membrane surface with balanced positive and negative charges showed the best non-biofouling performance for the proteins and bacteria tested in this study.

Ph‐dependent Permeation Through Polysulfone Ultrafiltration Membranes Prepared by Ultraviolet Polymerization Technique

Ph‐dependent Property of Carboxyl‐based Ultrafiltration Membranes Fabricated from Poly(vinyl Chloride‐ R ‐acrylic Acid)

Functional and Surface-Active Membranes from Poly(vinylidene Fluoride)-Graft-poly(acrylic Acid) Prepared Via RAFT-mediated Graft Copolymerization.

Poly(vinylidene Fluoride) with Grafted Poly(ethylene Glycol) Side Chains Via the RAFT-Mediated Process and Pore Size Control of the Copolymer Membranes

An Acid Resistant Nanofiltration Membrane Prepared from a Precursor of Poly(s-Triazine-amine) by Interfacial Polymerization

Preparation of Ph/Temperature Responsive Polymer Membrane by Plasma Polymerization and Its Riboflavin Permeation

Preparation Of Surface-Modified Stimuli-Responsive Polymeric Membranes By Plasma And Ultraviolet Grafting Methods And Their Riboflavin Permeation

Surface modification of PVDF porous membranes by electron irradiation

Surface immobilization of polymer brushes onto porous poly(vinylidene fluoride) membrane by electron beam to improve the hydrophilicity and fouling resistance

Plasma Surface Graft of Acrylic Acid Onto a Porous Poly(vinylidene Fluoride) Membrane and Its Riboflavin Permeation

Photochemical Surface Modification of Poly(arylsulfone) Ultrafiltration Membrane and Covalent Immobilization of Enzyme.

Achieving highly effective non-biofouling performance for polypropylene membranes modified by UV-induced surface graft polymerization of two oppositely charged monomers.

Thermo- and Ph-Responsive Polypropylene Microporous Membrane Prepared by the Photoinduced Raft-Mediated Graft Copolymerization

pH-Responsive Poly(vinyl chloride) Ultrafiltration Membranes Modified by Poly(vinyl chloride)-Poly(acrylic acid) Block Copolymers

Controlled Release Of Riboflavin And Insulin Through Cross-Linked Poly(Vinyl Alcohol) Chitosan Blend Membrane

New Ph-Switch Nucleopore Membranes Prepared by Photografting

Preparation of pH-responsive asymmetric polysulfone ultrafiltration membranes with enhanced anti-fouling properties and performance by incorporating poly(2-ethyl-2-oxazoline) additive

Preparation of ph-sensitive composite nanofiltration membrane

Poly(N-Isopropylacrylamide) Grafted Poly(Vinylidene Fluoride) Copolymers for Temperature-Sensitive Membranes

Ultrafiltration membranes prepared from polyethersulfone-grafted-poly (N-vinyl-pyrrolidone) synthesized via simultaneous irradiation in homogenous phase and their anti-fouling performance

PVDF blended PVDF-g-PMAA pH-responsive membrane: Effect of additives and solvents on membrane properties and performance