Abstract:<p>Hybrid serial-parallel kinematic machine tool (HSPKMT) has been regarded as a promising solution for 5-axis machining in many industrial fields. A typical HSPKMT can be constructed by integrating a parallel functional module with a serial functional module. Following this way, the authors construct a novel 5-axis HSPKMT through the integration of an over constrained redundantly actuated parallel module with a stack-up serial gantry. The proposed HSPKMT can accomplish a 5-axis motion capacity with three translations and two rotations (3T2R). A hierarchical design method is proposed to facilitate the design issues of the 5-axis HSPKMT. According to the hierarchical method, a laboratory prototype is designed with a top-down strategy and then fabricated with a bottom-up strategy. An open-architecture computer numerical control (CNC) system is developed to drive the fabricated prototype. A kinematic analysis is carried out to reveal necessary kinematic properties of the proposed HSPKMT. The reachable workspace and task workspace are defined to graphically illustrate the machine's position-orientation capabilities. A workspace performance index is formulated to compare the proposed 5-axis HSPKMT with several 5-axis machine tools. Based the kinematic analysis, a 5-axis machining methodology is developed and further applied to the laboratory prototype to perform 5-axis machining tasks. The machining tests verify that the proposed novel HSPKMT possesses desirable 5-axis machining capability with the tolerance rang of ±0.05 mm. This also implies that the proposed hierarchical design method as well as the 5-axis machining methodology can be further applied to other types of HSPKMTs with minor modifications.</p>

Study on the CNC system of a five-axis parallel kinematic machine

Research on CNC System of Parallel Kinematic Machining Center

Study On The Post-Processing Method Of 5-Ups/Prpu Five-Axes Fully Parallel Machine Tool (Id : 4-001)

Five-axis parallel mechanism system (PMS) CNC partial link control system based on modified inverse kinematic of 6-DOF UPS parallel manipulator

Design and experimental study of the SPKM165, a five-axis serial-parallel kinematic milling machine

Kinematic Analysis of the SPKM165, a 5-Axis Serial-Parallel Kinematic Milling Machine

Study on the RTCP and RPCP Function of the 5-Axis CNC

Analysis on the Kinematic Chain Configuration Scheme of Five-axis Milling Machine Tool

The Realization of a Novel 3-DOF Parallel Machine Tool and Its NC Architecture

The Kinematics Analysis Of A Novel 5-Dof Serial-Parallel Machine Tool

The Analysis for Real-Time Performance and Realization of CNC System on Middle-Convex and Varying Ellipse Piston Machining

Machining with a Precision Five-Axis Machine Tools Created by Combining a Horizontal Parallel Three-Axis Motion Platform and a Three-Axis Machine Tools

Hierarchical design, laboratory prototype fabrication and machining tests of a novel 5-axis hybrid serial-parallel kinematic machine tool

The Development of Six-Axis CNC System Software of Winding Machine

The Kinematic Analysis of A Novel Parallel Machine Tool with 3-Hss Structure

Five-axis Commercial Electro-discharge Machining CNC System based on PMAC

Open Architecture CNC Software Package and Key Technology

Workspace Analysis of a 5-Axis Parallel Kinematic Machine Tool

Study on Open CNC Control System Based on GUC Motion Controller

CNC system for profile grinding machine based on machine vision