Highly efficient removal of tannic acid from wastewater using biomimetic porous materials
Baoshan Tang,Meijuan Li,Lanxiang Liu,Kai Li,Juan Xu,Jinju Ma,Hong Zhang
DOI: https://doi.org/10.1016/j.envres.2024.118252
IF: 8.3
2024-02-01
Environmental Research
Abstract:To effectively remove tannic acid (TA) from wastewater, using green and natural materials has attracted increasing attention. Inspired by Galla Chinensis (GC) with high content of TA, this study synthesized a biomimetic porous adsorbent to mimic the GC structure using dialdehyde tapioca starch (DTS) and gelatin (GL). The TA adsorption performance and mechanism of synthetic porous material were investigated. Results revealed that the porous material exhibited a maximum TA adsorption capacity of 1072.01 mg/g, along with a high removal rate of 95.16% under the conditions of a DTS-GL mass ratio of 1:1, DTS aldehyde content of 48.16%, a solid content of 5%, and a pH of 2 at 25 °C. The adsorption of TA by DTS was not affected by water-soluble cationic and anion. The adsorption kinetics of TA on the porous material followed the pseudo-second-order model, and this Langmuir adsorption model (R<sup>2</sup> = 0.9954) which were well described the adsorption of TA by the material, indicating that the adsorption primarily occurred in a monolayer. FTIR, XRD, DSC, TG, XPS, and SEM-EDS were employed to characterize the structure characteristics of the porous material. The cross-linking between DTS and GL by Schiff base reaction imparted a chemical structure could absorb TA by hydrogen bonding. The TA desorption rates of in 30% acetone and 40% ethanol solutions were 88.76% and 91.03%, respectively. The porous material prepared by the GC-inspired approach holds promise as an ideal choice for loading polyphenolic compounds and provides a new perspective for the design and application of bioinspired engineering materials.
environmental sciences,public, environmental & occupational health