Abstract:A precursor CuO/ZnO/Al2O3 catalyst for methanol synthesis has been prepared at room temperature by introducing a ternary salt solution into the excess of sodium carbonate solution following the reverse co-precipitation method. The catalyst was tested for the synthesis of methanol from synthesis gas. The composition (vol. %) has been presented: CO, 22; CO2, 5.8; N2, 5.5; H2, balance. The methanol productivity was recorded to be 2.7 kg kgcat–1 h–1 at a temperature of 260 °С, a pressure of 3 MPa, and a space velocity of 61,700 l (kgcat)–1 h–1. The possibility of regenerating the activity of a catalyst subjected to conditions of artificial aging (overheating in a syngas environment) has been tested: approximately 92% of the initial activity could be restored. Physicochemical studies were conducted using the thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FTIR), the scanning electron microscopy (SEM), and the X-ray diffraction (XRD) techniques using the Cu, Zn, and Al oxides obtained following the co-precipitation method. X-ray studies revealed that an amorphous phase was obtained from the Al oxide that was synthesized following both the direct and reverse co-precipitation methods. The calcination temperature was 300 °C. Individual oxides of Cu and Zn obtained following the reverse co-precipitation method form crystalline phases when calcined at 300 °C. When all three ingredients are present, calcination of the sample at 300 °C helps obtain an X-ray amorphous structure of the catalyst characterized by a high specific surface area. High-temperature carbonates are formed from samples prepared using a ternary mixture of nitrate salts when these are calcined at 300 °C.

Catalytic Synthesis of Methylcyclopentadiene by KNO3/Al2O3

Catalytic Performance of Supported Kno3 Solid Bases for Methylation of Cyclopentadiene

NiCo2O4 Nanoparticles: an Efficient and Magnetic Catalyst for Knoevenagel Condensation

Methylation of Naphthalene with Methanol over the Al-Modified SiO2 Zeolite Catalysts

Synthesis of N-Methylmorpholine over the Catalyst Cu-Ni-Co/Al2O3 in the Gas Phase

Study on Deactivation of the CuO‐NiO/γ‐Al2O3 Catalyst in the Synthesis of N‐alkylmorpholines

Methylation of Cyclopentadiene on Solid Base Catalysts with Different Surface Acid–base Properties

ChemInform Abstract: Knoevenagel Condensations of 1,3‐dicarbonyl Compounds with Aldehydes Catalyzed by Heterogeneous PS‐AlCl3 Without Solvents.

ChemInform Abstract: Nano‐Fe3O4 Encapsulated‐Silica Particles Bearing 3‐aminopropyl Group As a Magnetically Separable Catalyst for Efficient Knoevenagel Condensation of Aromatic Aldehydes with Active Methylene Compounds.

Solution-combustion Synthesized Nano-pellet α-Al2O3 and Catalytic Oxidation of Cyclohexane by Its Supported Cobalt Acetate

SrCaAl mixed metal oxides derived from LDH precursor as a novel and efficient solid base catalyst for Knoevenagel condensation reaction: Multivariate optimization study

Preparation, Characterization and Catalytic Activity Studies of CeO2–K Diesel Soot Oxidation Catalysts Loaded on Porous Al2O3 Substrate Using Water-Immiscible Solvent

Insight into the Efficient Oxidation of Methyl-Ethyl-ketone over Hierarchically Micro-Mesostructured Pt/K-(Al)SiO2 Nanorod Catalysts: Structure-activity Relationships and Mechanism

Fe3O4@C@MCM41-guanidine core-shell nanostructures as a powerful and recyclable nanocatalyst with high performance for synthesis of Knoevenagel reaction

Alkali metal enhanced cerium manganese-based three-dimensional ordered macroporous catalyst for NO oxidation and soot combustion

Effective Cu/ZnO/Al2O3 Catalyst for Methanol Production: Synthesis, Activation, Catalytic Performance, and Regeneration

Preparation of CuO/ZnO/Al2O3 Catalysts for Methanol Synthesis Using Parallel-Slurry-mixing Method

Preparation of Pt/Al2O3 catalyst and its performance on methanol catalytic combustion at low temperature

Catalytic Oxidation of Ethylbenzene to Acetophenone Using Alumina-Supported Dichromate: Process Optimisation and Development of A Continuous Process

Mesoporous Ag-K-Al 2 O 3 catalysts prepared via a one-pot evaporation induced self-assembly approach and their application in catalytic oxidation of formaldehyde

Highly-dispersed Ni 3 Fe alloy nanoparticles anchored on MgAl-LDO for efficient catalytic amination of KA-oil to cyclohexylamine