Abstract:Novel adsorbent based silica gel/graphene oxide (SG/GOIIC) was fabricated.Excellent selectivity towards In(III) ions even in the presence of Fe(III) ions.Synergistic coordination between In(III) ions and O, P atoms was responsible for In(III) ions adsorption.Here, a novel adsorbent for selective separation and recovery of In(III) ions from the real wastewater was fabricated using ion imprinting technique with graphene oxide composite as the host materials. Several techniques, including Fourier Transform Infrared Spectroscopy (FT-IR), Scanning Electron Microscopy (SEM), X-ray Photoelectron Spectroscopy (XPS), Thermogravimetry (TGA) and Brunauer-Emmett-Teller (BET)were used to characterize the silica gel/graphene oxide based ion-imprinted composites (SG/GOIIC) and the obtained experimental results were combined with the Density Functional Theory (DFT) theoretical calculations to reveal the adsorption mechanism. The adsorption behaviors of SG/GOIIC towards In(III) ions was evaluated using both batch and fixed-bed experiments. The results shown that the adsorption ability of In(III) ions onto SG/GOIIC increased with the increase of pH range from 1.5 to 3.0, and that the adsorption equilibrium was reached within 50 min. The maximum uptake of SG/GOIIC calculated using Langmuir isotherm was estimated to 147.1 mg/g. Kinetics studies revealed that the pseudo-second-order was a better choice to describe the whole absorption process, while the isotherms of In(III) ions adsorption followed the Langmuir model. In addition, SG/GOIIC exhibited excellent affinity towards In(III) ions in water even in the presence of Sn(II), Cu(II), Zn(II), Al(III) and Fe(III) ions and the corresponding selectivity coefficients of SG/GOIIC for In/Sn, In/Cu, In/Zn, In/Al and In/Fe were 18.47, 22.99, 35.31, 16.67 and 8.52, respectively. The SG/GOIIC possessed good stability with adsorption rate maintained at 94.36% even after five cycles. More importantly, the SG/GOIIC composite was able to separate and to recover indium from real wastewater through fix-bed adsorption. This study proposed a new method to prepare adsorbent with excellent selectivity towards targeted ions and to figure out the difficulty of graphene oxide in separation from water.

Preconcentration of indium with 1-phenyl-3-methyl-4-stearoyl-5-pyrazolone on silica gel

Removal of Indium Ions from Aqueous Solutions Using Hydroxyapatite and Its Two Modifications

Preconcentration of Trace Metals with 1-Phenyl-3-Methyl-4-Stearoyl-5-Pyrazolone Loaded on Silica Gel

SPEC Process III. Synthesis of a Macroporous Silica-based Crown Ether-impregnated Polymeric Composite Modified with 1-Octanol and its Adsorption Capacity for Sr(II) Ions and Some Typical Co-existent Metal Ions

Adsorption of Some Typical Fission Products onto a Novel Macroporous Silica-based Dialkyl Derivative of Pyridine Impregnated Material

Adsorption of Cesium and Some Typical Elements on A Novel Solid-State Macroporous Silica-Calix[4]Arene Material

Unusually Flexible Indium(III) Metal-Organic Polyhedra Materials for Detecting Trace Amounts of Water in Organic Solvents and High Proton Conductivity.

Adsorption of Cesium and Some Typical Coexistent Elements Onto a Modified Macroporous Silica-Based Supramolecular Recognition Material.

Preparation of high purity indium by chemical purification: Focus on removal of Cd, Pb, Sn and removal mechanism

Experimental and DFT studies on highly selective separation of indium ions using silica gel/graphene oxide based ion-imprinted composites as a sorbent

Preconcentration and Separation of Trace Pd(Ii) and Pt(Iv) with Silica Gel Bonded by Aminopropyl-Benzoylazo-4-(2-Pyridylazo)-Resorcinol

Recovery of indium ions by nanoscale zero-valent iron

High-purity Indium Preparation from Waste ITO Target by Hydrochloric Acid Dissolving-Aluminum Substitution-Smelting-Electrolysis Process

Recovery of indium and germanium from In-Ge residue leaching solution using solvent extraction and tannin precipitation

SOLVENT EXTRACTION OF INDIUM WITH l-(4-ALKYLPHENYL)-3-HYDROXY-2-METHYL-4-PYRIDONES

Complexation mechanism of crown ether with indium in the presence of KI: Toward efficient recovery of indium from secondary resources

Electrochemical Mechanism of the Preparation of High-Purity Indium by Electrodeposition

The Behavior of Indium(III) Complexes in Several Distribution Systems. II. The Extraction of Indium(III) Halide and Thiocyanate Complexes into 4-Methyl-2-Pentanone, 4-Methyl-2-Pentanol, or Nitrobenzene

Multiple Factors Influencing High-Purity Indium Electrolytic Refining

Determination of Indium in Metallic Zinc by Flame Atomic Absorption Spectrometry after Extraction with L-Phenyl-3-methyl-4-benzoyl-5-pyrazolone

Non-aqueous solvent extraction of indium from an ethylene glycol feed solution by the ionic liquid Cyphos IL 101: speciation study and continuous counter-current process in mixer–settlers