Abstract:The uniform bubble distribution is ensured to gain sufficient performance of dense fluidized bed reactors. Although distributor plays an important role in obtaining homogenous and small bubbles, the highly inelastic energy dissipation from solids bed triggers non-uniform bubbles growth. Hence, the total solids pressure loading ( T) is introduced here to present the interaction between contribution from solids bed and distributor. The boundary between uniform and non-uniform bubble growth can be detected by criterion based on Prigogine’s minimum of the entropy production principle. Furthermore, an industrial case is studied further based on stability analysis and new operational conditions are provided to improve the performance through eliminating non-uniform bubble growth. INTRODUCTION Consider gas solids fluidization that begins in an initial state of uniform density where gas is evenly introduced into the base of the bed via distributor. The solids then “cools” as the collisions dissipate the kinetic energy of the initial condition, and the cooling solids do not remain homogenous, i.e. the state of uniform density is unstable so that the system totally exhibits the coexistence of two phases: clusters and bubbles. Thus, uniform gas solids distribution, resulting from the distributor, will be damaged by solids beds itself and this process is self-aggregating until the size of large bubbles reaches the bed diameter1-4. Recent studies have shown that non-uniform bubble growth even slugging may occur in a sufficiently deep bed, as exemplified in Fig. 1. The result of this phenomenon will resist mass transfer and bypass reactant in the form of large bubbles or slugs, leading to poor conversion and selectivity in reactors. Therefore, a deep fluidized bed is a fundamental model in uniformity breaking mechanics and should be investigated carefully to ensure the performance of fluidized bed reactors. Fig. 1. Illustration of the mal-distribution in a deep fluidized bed. STABLITY ANALYSIS The distribution of bubbles is distributed uniformly through the distributor, while the uniformity is broken due to inelastic energy dissipation from solids beds. Therefore, in order to describe the multi-phase interaction in dense fluidization, the dimensionless number total solids pre T), i.e. the pressure ratio between solids bed and distributor, is introduced here:

Stability Analysis on Particle Uniform Distribution in Cocurrent-up Gas-Solid Flow

Stability of Particle Distributions in Steady Uniform Flows

Effect of Non - uniform Suspended Particle Distribution on stability of Jet

Instability of Uniform Fluidization

Characterization of Flow Pattern of Cohesive Particles in Gas-Solid Fluidized Bed Via Axial Distribution of Particle Motions

Temporal Stability of A Particle-Laden Blasius Boundary Layer

Research on Stability of Interface of Jet Containing Suspended Solid Particles

12th International Conference on Fluidized Bed Technology UNIFORM BUBBLE GROWTH IN FLUIDIZED BED AND ITS STABILITY ANALYSIS

Stability Analysis of Gas–Solid Distribution Through Nonidentical Parallel Paths

Effect of solid particles on stability flow in the boundary layer on a flat plate

Research on Stability of Dense Gas-particle Two-phase Jets

Boundary Layer Stability for two Phase Flow with Pressure Gradient

Generalized stability theory of polydisperse particle-laden flows. Part1. Channel flow

Linear stability and numerical analysis of vertical dense particulate flows in hydraulic conveying

A new theory of the instability of a uniform fluidized bed

Theeffectofnon-linearinteractionbetweengasandparticlevelocitiesonthe Hydrodynamicstabilityintheblasiusboundarylayer

Distribution of non-spherical nanoparticles in turbulent flow of ventilation chamber considering fluctuating particle number density

Distribution of Nanoparticles in a Turbulent Taylor–Couette Flow Considering Particle Coagulation and Breakage

Distribution and Deposition of Cylindrical Nanoparticles in a Turbulent Pipe Flow

Flow instability of nanofuilds in jet

Nonequilibrium characteristics and spatiotemporal long-range correlations in dense gas-solid suspensions