Abstract:Purpose: This work describes the hardware and software developments of a prototype chest digital tomosynthesis (CDT) R/F system. The purpose of this study was to validate the developed system for its possible clinical application on low-dose chest tomosynthesis imaging. Methods: The prototype CDT R/F system was operated by carefully controlling the electromechanical subsystems through a synchronized interface. Once a command signal was delivered by the user, a tomosynthesis sweep started to acquire 81 projection views (PVs) in a limited angular range of ±20°. Among the full projection dataset of 81 images, several sets of 21 (quarter view) and 41 (half view) images with equally spaced angle steps were selected to represent a sparse view condition. GPU-accelerated and total-variation (TV) regularization strategy-based compressed sensing (CS) image reconstruction was implemented. The imaged objects were a flat-field using a copper filter to measure the noise power spectrum (NPS), a Catphan® CTP682 quality assurance (QA) phantom to measure a task-based modulation transfer function (MTFTask ) of three different cylinders' edge, and an anthropomorphic chest phantom with inserted lung nodules. The authors also verified the accelerated computing power over CPU programming by checking the elapsed time required for the CS method. The resultant absorbed and effective doses that were delivered to the chest phantom from two-view digital radiographic projections, helical computed tomography (CT), and the prototype CDT system were compared. Results: The prototype CDT system was successfully operated, showing little geometric error with fast rise and fall times of R/F x-ray pulse less than 2 and 10 ms, respectively. The in-plane NPS presented essential symmetric patterns as predicted by the central slice theorem. The NPS images from 21 PVs were provided quite different pattern against 41 and 81 PVs due to aliased noise. The voxel variance values which summed all NPS intensities were inversely proportional to the number of PVs, and the CS method gave much lower voxel variance by the factors of 3.97-6.43 and 2.28-3.36 compared to filtered backprojection (FBP) and 20 iterations of simultaneous algebraic reconstruction technique (SART). The spatial frequencies of the f50 at which the MTFTask reduced to 50% were 1.50, 1.55, and 1.67 cycles/mm for FBP, SART, and CS methods, respectively, in the case of Bone 20% cylinder using 41 views. A variety of ranges of TV reconstruction parameters were implemented during the CS method and we could observe that the NPS and MTFTask preserved best when the regularization and TV smoothing parameters α and τ were in a range of 0.001-0.1. For the chest phantom data, the signal difference to noise ratios (SDNRs) were higher in the proposed CS scheme images than in the FBP and SART, showing the enhanced rate of 1.05-1.43 for half view imaging. The total averaged reconstruction time during 20 iterations of the CS scheme was 124.68 s, which could match-up a clinically feasible time (<3 min). This computing time represented an enhanced speed 386 times greater than CPU programming. The total amounts of estimated effective doses were 0.12, 0.53 (half view), and 2.56 mSv for two-view radiographs, the prototype CDT system, and helical CT, respectively, showing 4.49 times higher than conventional radiography and 4.83 times lower than a CT exam, respectively. Conclusions: The current work describes the development and performance assessment of both hardware and software for tomosynthesis applications. The authors observed reasonable outcomes by showing a potential for low-dose application in CDT imaging using GPU acceleration.

A new data acquisition design for breast cancer detection system

SU‐FF‐I‐39: A Computer Simulation Platform for the Optimization of Breast Tomosynthesis System

Next Generation Dedicated 3d Breast Imaging With Xact

Confocal Microwave Imaging for Breast Cancer Detection: Delay-Multiply-And-Sum Image Reconstruction Algorithm

Novel Optimization Method for Multi-Dimensional Breast Photoacoustic Tomography

Task-Based Modeling of a 5k Ultra-High-Resolution Medical Imaging System for Digital Breast Tomosynthesis

Design and Evaluation of a Novel Breast Cancer Detection System Combining Both Thermoacoustic (TA) and Photoacoustic (PA) Tomography.

Development of a chest digital tomosynthesis R/F system and implementation of low-dose GPU-accelerated compressed sensing (CS) image reconstruction

Stationary Digital Breast Tomosynthesis System That Uses a Carbon Nanotube X-ray Source Array: a Feasibility Study

Synthesising two-dimensional mammographic images using compressed sensing-reconstructed digital breast tomosynthesis images

Mass detection in automated three dimensional breast ultrasound using cascaded convolutional neural networks

Robust breast cancer detection in mammography and digital breast tomosynthesis using annotation-efficient deep learning approach

Computer-aided detection of cancer in automated 3-D breast ultrasound

Automated assessment of task-based performance of digital mammography and tomosynthesis systems using an anthropomorphic breast phantom and deep learning-based scoring

Time to Consider a Personalized Approach to Incorporate Tomosynthesis Into Routine Breast Cancer Screening

Method and System for Image Analysis to Detect Cancer

Limited-Angle Computer Tomography with Truncated Projection Artifacts Removal

The Application of Adaptive Time Gain Compensation in an Improved Breast Ultrasound Tomography Algorithm

Fusion Techniques for the Breast Cancer Detection

Robust breast cancer detection in mammography and digital breast tomosynthesis using an annotation-efficient deep learning approach

Design and image-quality performance of high resolution CMOS-based X-ray imaging detectors for digital mammography