Abstract:Biodegradable poly(butylene succinate)(PBS)/distiller’s grains (DG) composites was prepared by PBS mixing with DG which was surface treated by different modifiers after NaOH,and degradation for 75 d by the compost. DG’s effects on the composites’properties including tensile properties,crystallization,thermal performance and degradation were discussed. The results show that when adding 7 phr of unmodified DG of which particle size is 109μm,the tensile strength and broken elongation of composite is improved by 15.56% and 20.31% respectively. While applying DG which has preoxidized by 5% NaOH solution in 40℃water bath for 30 min,the polarity between alkali-treated fiber and PBS results the poor compatibility,the broken elongation decreases,but the hydrophilicity increases significantly,and the degradation is accelerated,the mass loss after 75 d compost deg-radation is reached to 42.82% which is 5.90 times compared to pure PBS. Alkali-treated DG processed with modifier can distinctly improve the interface compatibility of composite. With 7 phr alkali-treated DG modified by 2 phr KH-560 blending into PBS,the tensile strength and broken elongation of composite increase by 23.66% and 33.18% respectively,the hydrophilicity is improved, the mass loss after 75 d compost degradation is 5.16 times to pure PBS,the temperatures of mass loss 10% and 50% are lifted by 11℃and 14℃ respectively,and the thermal performance still remains good. However DG has no obvious affect on crystal form of PBS.

A Performance Comparison of Different Plant Fiber/PBS Composites

Mechanical and thermal properties of poly(butylene succinate)/plant fiber biodegradable composite

Study on the Effect of Straw Fiber on Properties of PBS Composite

Study on Properties of Modified Bamboo Fiber Reinforced Polypropylene Composites

Effect of Fiber Morphology on Rheological Properties of Plant Fiber Reinforced Poly(Butylene Succinate) Composites

Comparing Four Kinds of Lignocellulosic Biomass for the Performance of Fiber/PHB/PBS Bio-composites

Effect of Straw Fiber Modification on Properties for Wheat Straw Fiber/PBS Composite

Rheological, thermal, and mechanical properties of poly(butylene succinate) (PBS)/poly(L-lactide) (PLA) fiber biodegradable green composites

Mechanical and Thermal Properties of Basalt Fiber Reinforced Poly(butylene Succinate) Composites

Study on Impact of Modified Wheat Straw Fibers on PBS Composites Properties

Preparation and Properties of PBS/sisal‐fiber Composites

Research on Properties and Preparation of PBS/Sisal Composites

Study on Thermal and Mechanical Properties of Cotton Stalk Bast Fibers Reinforced Poly(butylene succinate) Composites

Mechanical, Morphology, and Thermal Properties of Carbon Fiber Reinforced Poly(Butylene Succinate) Composites

Performance Evaluation of Jute/Glass-Fiber-Reinforced Polybutylene Succinate (PBS) Hybrid Composites with Different Layering Configurations

Mechanical Properties and Crystallization Behavior of Poly(butylene Succinate) Composites Reinforced with Basalt Fiber

Properties of Poly(butylene succinate)/Distiller’s Grains Composites

Changes in Physical Properties and Microstructure of Bamboo–Plastic Composites with Different Bamboo Powder/Polybutylene Succinate Ratios, Polypropylene, and Polyethylene

Morphology, Thermal, Mechanical Properties and Rheological Behavior of Biodegradable Poly(butylene Succinate)/poly(lactic Acid) In-Situ Submicrofibrillar Composites.

Mechanical and thermal performance of distillers grains filled poly(butylene succinate) composites

Mechanical Properties of Poly(Butylene Succinate) Reinforced with Continuously Steam-Exploded Cotton Stalk Bast