Abstract:Z-source inverter provides a competitive single-stage dc-ac power conversion with the capability of both buck and boost voltage regulation. In order to maximize voltage gain and to increase efficiency, this paper proposes an improved pulse-width modulation (PWM) strategy. By adjusting the shoot-through duty ratio of one-phase leg, it regulates the average value of intermediate dc-link voltage, which is the same as the instantaneous maximum of three-phase line voltage in one switching time period (T-s). And the other two-phase legs maintain the fixed switching states. Thus, the equivalent switching frequency of power devices in the inverter bridge is reduced to 1/3f(s) (f(s) is the frequency corresponding to T-s ). The operating principles and closed-loop controller design are analyzed and verified by simulation and experiments. Compared with the existing PWM strategies, the improved PWM (IPWM) strategy demonstrates higher efficiency under full operation range of low voltage gain (1.27-2) application. However, with the IPWM strategy, the inductor current and capacitor voltage contain sixtime-line-frequency ripples, which consequently require large size of the passive components when the output frequency is very low. Thus, it is also suitable for 400-800-Hz medium frequency aircraft and vessel power supply system due to a relatively high output line frequency. Furthermore, the idea of IPWM strategy can be extended to other kinds of three-phase impedance network-based inverters.

Analysis and Research on Optimized Control Strategy of PWM Converter

Study on dual active bridge DC-DC converter based on second dual-phase-shifting control

A Switching Strategy of Dead-Time Elimination for Pulse Width Modulation Converters

Efficiency Optimization Strategy of Three Port Triple Active Bridge DC-DC Converter

A ZCS AC/DC CONVERTER WITH HIGH POWER FACTOR BASED ON PWM CONTROL STRATEGY

Analysis and simulation study on single-phase H-bridge rectifier/inverter

Analysis and Mitigation of Dead-Time Harmonics in the Single-Phase Full-Bridge PWM Converter With Repetitive Controllers

Harmonics Mitigation of Dead Time Effects in Pwm Converters Using A Repetitive Controller

Improved PWM Modulation Strategy for CHB Multilevel Converter

Integrated Optimization of Dual-Active-Bridge DC–DC Converter with ZVS for Battery Charging Applications

A PWM Method of H-Bridge Converter with Temperature Rise Balancing and Minimization Based on Periodically Alternating Employment of Power Devices

Aalborg Universitet Harmonics mitigation of dead time effects in PWM converters using a repetitive

Power Flow and Inductor Current Analysis of PWM Control for Dual Active Bridge Converter

Modified Unified PWM Control to Operate the Dual Active Bridge Converters under ZVS in the Whole Load Range

Optimal Simultaneous PWM Control for Three- Phase Dual-Active-Bridge Converters to Minimize Current Stress in the Whole Load Range

Research on Phase-shift-full-bridge Zero-voltage Switching Digital One-cycle Control

Quasi-single-polarity PWM Method for Reducing the Effect of Dead Time

An Improved Zero-Voltage and Zero-Current- Switching Phase-Shift Full-Bridge PWM Converter with Low Output Current Ripple

A Novel PWM Model for Cascaded H-bridge Converters

Study on Control Strategy for SPWM Method of Two-stage Matrix Converter and Reactive Power Control

An Improved PWM Strategy for Z-Source Inverter with Maximum Boost Capability and Minimum Switching Frequency