Abstract:The composite phase change material (PCM) consisting of phase change paraffin (PCP) and polymethyl methacrylate (PMMA) was prepared as a novel type of shape-stabilized PCM for building energy conservation through the method of bulk polymerization. The chemical structure, morphology, phase change temperature and enthalpy, and mechanical properties of the composite PCM were studied to evaluate the encapsulation effect of PMMA on PCP and determine the optimal composition proportion. FTIR and SEM results revealed that PCP was physically immobilized in the PMMA so that its leakage from the composite was prevented. Based on the thermo-physical and mechanical properties investigations, the optimal mass fraction of PCP in the composite was determined as 70%. The phase change temperature of the composite was close to that of PCP, and its latent heat was equivalent to the calculated value according to the mass fraction of PCP in the composite. For estimating the usability in practical engineering, thermal stability, reliability and temperature regulation performance of the composite were also researched by TG analysis, thermal cycling treatments and heating-cooling test. The results indicated that PCP/PMMA composite PCM behaved good thermal stability depending on the PMMA protection and its latent heat degraded little after 500 thermal cycling. Temperature regulation performance of the composite before and after thermal cycling was both noticeable due to its latent heat absorption and release in the temperature variation processes. The PCP/PMMA phase change plate was fabricated and applied as thermal insulator in miniature concrete box to estimate its temperature regulation effect under the simulated environmental condition. It can be concluded that this kind of PCP/PMMA shape-stabilized PCM with the advantages of no leakage, suitable phase change temperature and enthalpy, good thermal stability and reliability, and effective temperature regulation performance have much potential for thermal energy storage in building energy conservation.

Preparation and characterization of PMMA based form-stable phase change thermal storage materials

Paraffin /poly(methyl Methacrylate) Blends As Form-Stable Phase Change Materials for Thermal Energy Storage

Preparation and Characterization of Poly (Mma-Co-aa)/paraffin Microencapsulated Phase Change Material for Thermal Energy Storage

Preparation and Properties of Paraffin /LDPE /OMMT /graphite Phase Change Composite for Thermal Energy Storage

Preparation,Characterization and Service Performance of Fatty Acid/PMMA Shape-Stabilized Phase Change Material

Preparation and Properties of Paraffin/PMMA Shape-stabilized Phase Change Material for Building Thermal Energy Storage

Preparation and characterization of a novel form-stable phase change material for thermal energy storage

Preparation and Properties of LA-MA/PMMA Composite Phase Change Material for Thermal Energy Storage

Preparation and Performance of Shape Stabilized Phase Change Thermal Storage Materials with High Thermal Conductivity

Myristic Acid/Polyaniline Composites As Form Stable Phase Change Materials for Thermal Energy Storage

Conjugated microporous polymers/n-carboxylic acids composites as form-stable phase change materials for thermal energy storage

Novel Form-Stable Phase Change Materials with Enhancing Crystallization Rate for Thermal Energy Storage

Preparation and Characterization of Cross-Linking PEG/MDI/PE Copolymer As Solid–solid Phase Change Heat Storage Material

Micro-encapsulated paraffin/high-density polyethylene/wood flour composite as form-stable phase change material for thermal energy storage

Synthesis and Properties of Form-Stable Phase Change Heat Storage Materials Based on Polyethylene-Polyamine

Preparation and Characterization of Poly (N-Methylol Acrylamide)/polyethylene Glycol Composite Phase Change Materials for Thermal Energy Storage

Synthesis and characterization of phase change materials microcapsules with paraffin core/cross-linked hybrid polymer shell for thermal energy storage

Fabrication and Performances of New Kind Microencapsulated Phase Change Material Based on Stearic Acid Core and Polycarbonate Shell

Poly(polyethylene Glycol Methyl Ether Methacrylate) As Novel Solid‐solid Phase Change Material for Thermal Energy Storage

Polymer Engineering in Phase Change Thermal Storage Materials

Preparation and Thermal Properties of Propyl Palmitate-Based Phase Change Composites with Enhanced Thermal Conductivity for Thermal Energy Storage