Abstract:An acoustic microscopy system was designed to perform 2D imaging in the C-plane with a single-element transducer. The ultrasound transducer was fabricated by polishing bulk lithium niobate (LiNbO(3)) to the required thickness (approximately 60 or 45 micro) for the desired operating frequency (55 or 75 MHz). The polished LiNbO(3) was attached to acoustic backing and matching layers. Finally, an epoxy lens was applied and the transducer mounted in a housing. The transducer was mounted in a 3D motorized positioning stage and operated by a high-frequency pulser/receiver. Received echoes were sampled with a 2 GHz ADC card and displayed on a PC using software developed in the Matlab environment. Transducer frequency and bandwidth were measured off a steel plate positioned at the focal length. A penny was scanned initially to confirm expected performance before acquiring data from liver (n=3) and spleen (n=3) specimens. For the first probe, the peak frequency was 54.05 MHz with a -6 dB bandwidth of 6.76 MHz. The axial and lateral resolutions were estimated to be 114 and 188 microm, respectively. For the second probe, the peak frequency was measured to 82 MHz with a -6 dB bandwidth of approximately 23 MHz. The axial and lateral resolutions were estimated to be around 33 and 81 microm, respectively. C-scans of the penny clearly showed detailed structures on front and back, while the capsule and the trabecular structures of the splenic tissues could easily be separated in different layers. In conclusion, an acoustic microscopy system operating at 55-75 MHz has been constructed and the feasibility of obtaining high-resolution images of tissue specimens demonstrated.

Acoustic Display System and Method for Ultrasonic Imaging

A Real-Time 3-D Underwater Acoustical Imaging System

3-D Ultrasonic Image Reconstruction in Frequency Domain Using a Virtual Transducer Model.

Frequency Domain Synthetic Aperture Focusing Technique for Variable-Diameter Cylindrical Components.

Design and simulation of a 2-D array flexible ultrasound transducer system for tissue characterization – A pilot study

HiRIS: An Airborne Sonar Sensor With a 1024 Channel Microphone Array for In-Air Acoustic Imaging

Multi-Frequency Transmitting Beamforming Algorithm Based on Cross Array

Design of Portable Three-Dimensional Sonar for Both Far-Field and Near-Field

Ultrasonic imaging system incorporating computer‐aided coherent processing

Development of an Estimation Instrument of Acoustic Lens Properties for Medical Ultrasound Transducers

Development of acoustic vidicon based on binocular vision and microphone array

A High-Frequency Mechanical Scanning Ultrasound Imaging System

An Efficient 3d Beamformer Implementation For Real-Time 4d Ultrasound Systems Deploying Planar Array Probes

An automatic measurement system using piezoelectric hydrophone for the three-dimensional ultrasound field distribution

A software package for portable three-dimensional ultrasound imaging

Probing the Spatial Impulse Response of Ultrahigh-Frequency Ultrasonic Transducers with Photoacoustic Waves

Programmable Real-time Clinical Photoacoustic and Ultrasound Imaging System

Acoustic microscopy system: design and preliminary results

Fabrication, Acoustic Characterization and Phase Reference-Based Calibration Method for a Single-Sided Multi-Channel Ultrasonic Actuator

AUTD3: Scalable Airborne Ultrasound Tactile Display