Abstract:Phase field method was used to simulate the effect of grains orientation angle θ11 and azimuth θA of non-preferentially growing dendrites on the secondary dendrites of preferentially growing dendrites. In the simulation process, two single-factor influence experiments were designed for columnar crystal structures. The simulation results showed that, when θ11 < 45° and θA < 45°, as θ11 was enlarged, the growth direction of the secondary dendrites on the preferentially growing dendrites at the converging grain boundary (GB) presented an increasing inclination to that of preferentially growing dendrites; with increasing θA, the growth direction of the secondary dendrites on the preferentially growing dendrites at the converging GB exhibited greater deflection, and the secondary dendrites grew with branches; the secondary dendrites on the preferentially growing dendrites at diverging GBs grew along a direction vertical to the growth direction of the preferentially growing dendrites. When θA = 45° and θ11 = 45°, the secondary dendrites grew in a direction vertical to the growth direction of preferentially growing dendrites. The morphologies of the dendrites obtained through simulation can also be found in metallographs of practical solidification experiments. This implies that the effect of a grain’s orientation angle and azimuth of non-preferentially growing dendrites on the secondary dendrites of preferentially growing dendrites does exist and frequently appears in the practical solidification process.

Phase Field Investigation on Cellular Tip Splitting During Directional Solidification

Quantitative Investigation of Cellular Growth in Directional Solidification by Phase-Field Simulation.

Phase-field Simulation of Tilted Growth of Dendritic Arrays During Directional Solidification

Cellular Tip Splitting Instability During Transient Growth

Orientation Dependence of Columnar Dendritic Growth with Sidebranching Behaviors in Directional Solidification: Insights from Phase-Field Simulations

Phase-field simulation of binary alloy during directional solidification

Tilted Dendritic Growth Dynamics and Dendrite to Degenerate Seaweed Transition in Directional Solidification: Insights from Phase-Field Simulations

A Two-Dimensional Phase-Field Investigation on Unidirectionally Solidified Tip-Splitting Microstructures

Phase-Field Modeling of Solute Trapping in Single-Phase Alloys During Directional Solidification

Phase-field Simulation of Formation of Cellular Dendrites and Fine Cellular Structures at High Growth Velocities During Directional Solidification of Ti56Al44 Alloy

Cellular growth during rapid directional solidification: Insights from quantitative phase field simulations

Growth Direction Selection of Tilted Dendritic Arrays in Directional Solidification over a Wide Range of Pulling Velocity: A Phase-Field Study

Phase-field Model Simulations of Alloy Directional Solidification and Seaweed-Like Microstructure Evolution Based on Adaptive Finite Element Method

Phase Field Investigation on the Initial Planar Instability with Surface Tension Anisotropy During Directional Solidification of Binary Alloys

Tip-Splitting Instability in Directional Solidification Based on Bias Field Method

Phase Field Investigation On The Selection Of Initial Sidebranch Spacing In Directional Solidification

Phase-field simulation of formation of cellular dendrite structures in directional solidification of Ti56Al44 alloy

Phase-field simulation for the evolution of solid/liquid interface front in directional solidification process

Application of Phase-Field Method to Numerical Simulation of Solidification

Phase-field Simulation of Secondary Dendrite Growth in Directional Solidification of Binary Alloys

Impact on Solidification Dendrite Growth by Interfacial Atomic Motion Time with Phase-Field Method