Abstract:In this paper, a novel magnetorheological (MR) damper working in the squeeze-valve bi-mode of MR fluid (MRF) was developed. The damper was consisted of two parts: the valve part and the squeeze part. Both of the two working parts could provide damping force when the damper worked. Firstly, the model of the novel damper was established to ensure that the damper structure was suitable for our design. Then, the magnetic field distribution inside the MR damper was simulated. The simulated results showed that the magnetic flux density was 120 mT when the current in the coil was 2.0 A, and the magnetic field distribution was uniform at the working area of the MRF. The magnetic flux density inside the damper could be controlled by changing the current in the coil. Finally, the damper was fabricated and its mechanical properties were tested by the universal testing machine (MTS 809). The influences of the displacement, frequency, current, and velocity on the damping force were systematically analyzed. The test results indicated that the largest damping force provided by the MR damper was about 6.5 kN. The curves of the damping force versus displacement were plump, which indicated that the ability of the damper to expend energy was well. The effective damping increased from 31.5 to 620 kNs m(-1) when the current increased from 0 to 2 A. The results indicated the properties of the damper could change in a huge range. To analyze the semi-active control performance of the damper, the back propagation neural network was trained to predict the damping force. The predicted results matched well with the experimental results, which indicated that this novel MR damper had great potential in the semi-active control field.

Performance Tests and Hysteresis Model of Mrf-04k Damper

Experimental Investigations on the Nonlinear Dynamics of Magnetorheological Dampers

Simulation on Hysteresis Characteristic of Squeeze Mode Magneto-Rheological Damper Based on Non-Convex Constitutive Relation

Dynamic Characteristics and Modeling of A New Magnetorheological Damper for Broadband Vibration Control

Optimal Design of Magnetic System for the Magnetorheological Intelligent Damper

Frequency-Dependent Bouc–Wen Modeling of Magnetorheological Damper Using Harmonic Balance Approach

A Disc-Type Magneto-Rheologtic Fluid Damper

Mechanical performance of a novel magnetorheological fluid damper based on squeeze-valve bi-mode of MRF

Experimental Investigation on Unbalance Response of a Shear-type Magnetorheologic Grease Damper Flexible Rotor System

Study on Damping Properties of Magnetorheological Damper

EXPERIMENTAL STUDY OF FULL-SCALE MAGNETORHEOLOGICAL FLUID DAMPER PERFORMANCE

A Design Methodology for A Magnetorheological Fluid Damper Based on A Multi-Stage Radial Flow Mode

Magnetic Circuit Design and Mechanical Performance Study for a MR Damper

A New Hysteresis Model with Resistor–Capacitor Operator for Magnetorheological Dampers

Dynamic Modeling of Large-Scale Magnetorheological Damper Systems for Civil Engineering Applications

Magnetorheological Damper Working in Squeeze Mode

Analysis and tests for a novel double-piston MR damper

Experimental study of mr damper performance and its nonlinear mechanical model

Hysteresis Behavior Computation And Dynamic Design Of Magnetorheological Dampers Under Sinusoidal Displacement Excitation

Modeling and Analyzing of Hysteresis Behavior of Magneto Rheological Dampers

Electromechanical Characteristics and Numerical Simulation of a New Smaller Magnetorheological Fluid Damper