Abstract:The cryogenic propulsion era started with the use of liquid rockets. These rocket engines use propellants in liquid form with reasonably high density, allowing reduced tank size with a high mass ratio. Cryogenic engines are designed for liquid fuels that have to be held in liquid form at cryogenic temperature and gas at normal temperatures. Since propellants are stored at their boiling temperature or subcooled condition, minimal heat infiltration itself causes thermal stratification and self-pressurization. Due to stratification, the state of propellant inside the tank varies, and it is essential to keep the propellant properties in a predefined state for restarting the cryogenic engine after the coast phase. The propellant’s condition at the inlet of the propellant feed system or turbo pump must fall within a narrow range. If the inlet temperature is above the cavitation value, cavitation will likely to happen to result in the probable destruction of the flight vehicle. The present work aims to find an effective method to reduce the stratification phenomenon in a cryogenic storage tank. From previous studies, it is observed that the shape of the inner wall surface of the storage tank plays an essential role in the development of the stratified layer. A CFD model is established to predict the rate of self-pressurization in a liquid hydrogen container. The Volume of Fluid (VOF) method is used to predict the liquid–vapor interface movement, and the Lee phase change model is adopted for evaporation and condensation calculations. A detailed study has been conducted on a cylindrical storage tank with an iso grid and rib structure. The development of the stratified layer in the presence of iso grid and ribs are entirely different. The buoyancy-driven free convection flow over iso grid structure result in velocity and temperature profile that differs significantly from a smooth wall case. The thermal boundary layer was always more significant for iso grid type obstruction, and these obstructions induces streamline deflection and recirculation zones, which enhances heat transfer to bulk liquid. A larger self-pressurization rate is observed for tanks with an iso grid structure. The presence of ribs results in the reduction of upward buoyancy flow near the tank surface, whereas streamline deflection and recirculation zones were also perceptible. As the number of ribs increases, it nullifies the effect of the formation of recirculation zones. Finally, a maximum reduction of 32.89% in the self-pressurization rate is achieved with the incorporation of the rib structure in the tank wall.

Effect of Return Inlet on Thermal Stratification in a Rocket Tank

Study on Thermal Stratification in Rocket Liquid Oxygen Tank with Natural Circulation Precooling Loop

Effect of the return flow locations on the thermal stratification in liquid oxygen tank of rocket

Numerical simulation of thermal stratification phenomenon in liquid oxygen rocket tank

Numerical Investigation of Thermal Stratification in Liquid Oxygen Tank for New-Style Launch Vehicle During Ground Precooling

Two-phase Flow Oscillation and Distribution in Parallel Channels During R1233zd(E) Subcooled Flow Boiling: A Numerical Study

Development of Thermal Stratification in a Rotating Cryogenic Liquid Hydrogen Tank

Effect of Roughness Elements on the Evolution of Thermal Stratification in a Cryogenic Propellant Tank

Pressurization Performance and Temperature Stratification in Cryogenic Final Stage Propellant Tank

Thermal Behavior and Flow Instabilities During Transient Chilldown of Liquid Rocket Engine by Passive Recirculation Approach

Performance of Circulation Precooling Loop for Liquid Rocket Engine with Different Return Flow Locations

Regulation of Gas-Liquid Stratified Flow Boiling Dynamic Instabilities in Horizontal Tube: Effects of Heat Load Distribution and Wall Thermal Capacity

Numerical studies on natural circulation precooling loop of cryogenic liquid rocket engine

Experimental Study of Flow Boiling Instabilities in Horizontal Tubes under Gas–liquid Stratification Condition: Effects of Heat Flux and Inlet Subcooling Degree

Study on Flow and Heat Transfer Characteristics of Cryogenic Tank with Gas Injection Circulation Precooling Backflow

Numerical Study on Temperature Distribution of Tank Pressurization Process of Liquid Rocket During Outflow

Temperature Stratification and Phase Transition in Liquid Oxygen Tank with Aerodynamic Heating Boundary

Study on Unsteady Heat Transfer Characteristic of Liquid Hydrogen Precooling Loop of Rocket Engine

Dynamic Thermal Performance of Cryogenic Liquid Hydrogen Heating from Gas-Liquid Stratification to Supercritical under a Constant Heat Flux Condition: A Two-Step Simulation

Numerical Investigation on Flow Condensation Process During Interphase Mixing in Oxygen Pipeline of Liquid Rocket

Thermodynamic Performance of Pre-Pressurization in a Cryogenic Tank