Abstract:This paper outlines an experimentally based design method for a compatible 3-DOF shoulder exoskeleton with an adaptive center of rotation (CoR) by matching the mechanical CoR with the anatomical CoR to reduce human–machine interaction forces and improve comfort during dynamic humeral motion. The spatial–temporal description for anatomical CoR motion is obtained via a specific experimental task conducted on six healthy subjects. The task is comprised of a static section and a dynamic section, both of which are recorded with an infrared motion capture system using body-attached markers. To reduce the influence of human soft tissues, a custom-made four-marker group block was placed on the upper arm instead of using discrete markers. In the static section, the position of anatomical CoR is kept stationary and calculated using a well-known functional method. Based on the static results, the dynamic section determines the statistical relationship between the dynamic CoR position and the humeral orientation using an optimization method when subjects move their upper arm freely in the sagittal and coronal planes. Based on the resolved anatomical CoR motion, a new mechanical CoR model derived from a traditional ball-and-socket joint is applied to match the experimental results as closely as possible. In this mechanical model, the CoR motion in three-dimensional space is adjusted by translating two of the three intersecting joint axes, including the shoulder abduction/adduction and flexion/extension. A set of optimal translation parameters is obtained through proper matching criterion for the two CoRs. Based on the translation parameters, a compatible shoulder exoskeleton was manufactured and compared with a traditional shoulder exoskeleton with a fixed CoR. An experimental test was conducted to validate the CoR motion adaptation ability by measuring the human–machine interaction force during passive shoulder joint motion. The results provide a promising direction for future anthropomorphic shoulder exoskeleton design.

Design Simulations of the SJTU Continuum Arm Exoskeleton (SCAX).

Design and Compliance Control of Rehabilitation Exoskeleton for Elbow Joint Anchylosis

Rehabilitation with Lower Limb Exoskeleton Robot Joint Load Adaptive Server Control

Design and Control of a Novel Underactuated Soft Exosuit.

Design and optimization of a novel sagittal-plane knee exoskeleton with remote-center-of-motion mechanism

Concept And Prototype Design Of A Soft Knee Exoskeleton With Continuum Structure (Softkex)

Modular Design and Implementation of Upper Limb Exoskeleton Rehabilitation Robot: Structure, Force Sensor and Control

Design of a personalized knee rehabilitation exoskeleton with high motion compliance

Design and Validation of a Compatible 3-Degrees of Freedom Shoulder Exoskeleton with an Adaptive Center of Rotation

Design and Evaluation of a Novel Variable Stiffness Hip Joint Exoskeleton

Design of a wearable shoulder exoskeleton robot with dual-purpose gravity compensation and a compliant misalignment compensation mechanism

Design of an anthropomorphic lower extremity exoskeleton with compatible joints

A Pneumatic Soft Exoskeleton System Based on Segmented Composite Proprioceptive Bending Actuators for Hand Rehabilitation

Development and Validation of a Self-Aligning Knee Exoskeleton With Hip Rotation Capability

Optimal design of active-passive shoulder exoskeletons: a computational modeling of human-robot interaction

Spine-Inspired Continuum Soft Exoskeleton for Stoop Lifting Assistance

Design and Optimization of Lower Limb Rehabilitation Exoskeleton with a Multiaxial Knee Joint

A simulation-based framework with a proprioceptive musculoskeletal model for evaluating the rehabilitation exoskeleton system

Design and Control of a Reconfigurable Upper Limb Rehabilitation Exoskeleton With Soft Modular Joints

Design and Voluntary Control of Variable Stiffness Exoskeleton Based on sEMG Driven Model

Comfort-Centered Design of a Lightweight and Backdrivable Knee Exoskeleton