Abstract:Quantifying the dynamics of surface soil bulk density (rho(b)) is important for characterizing water, heat, and gas exchanges in agricultural and environmental applications. Unfortunately, very few approaches are available for continuous in-situ monitoring of rho(b). The soil heat capacity-based (C-based) thereto-time domain reflectometry (thermo-TDR)approach has been used to measure rho(b) in-situ, but this approach gives rho(b) estimates with relatively large errors. In this study, we present a new soil thermal conductivity-based (lambda-based) thermo-TDR approach for continuous and automatic determination of rho(b) variation in-situ. An error analysis, literature data, and field experiments were used to evaluate the performance of the C-based and lambda-based approaches. The error analysis undertaken on hypothetical soils indicated that the new lambda-based approach was less sensitive to errors in the measurement inputs than was the C-based approach when the same relative errors occurred, except on very dry soils. Thermo-TDR measurements reported in the literature on seven soils showed that the new lambda-based approach provided more accurate and precise rho(b) estimates, with coefficient of determination (R-2) of 0.70 and root mean square error (RMSE) of 0.103 Mg m(-3), than did the C-based approach which gave rho(b) with R-2 of 0.32 and RMSE of 0.178 Mg m-3. Two field experiments were conducted to test the performance of the new lambda-based thermo-TDR approach for monitoring rho(b) dynamics. The results showed that following tillage surface rho(b) increased by about 35% within 40 days. The rho(b) obtained by the lambda-based thermo-TDR approach agreed well with independent core sampling measurements, with an average RMSE of 0.122 Mg m-3. The C-based approach failed to give acceptable rho(b) estimates in most cases because of probe deflection and environmental factors. We conclude that the new lambda-based thermo-TDR approach is a promising method for continuous in situ measurements of rho(b).

Determination of Soil Bulk Density with Thermo‐Time Domain Reflectometry Sensors

Determining Soil Bulk Density with Thermo‐Time Domain Reflectometry: A Thermal Conductivity‐Based Approach

In Situ Monitoring of Soil Bulk Density with A Thermo-Tdr Sensor

Thermo–Time Domain Reflectometry Method: Advances in Monitoring in Situ Soil Bulk Density

Improved Thermo-Time Domain Reflectometry Method for Continuous In-Situ Determination of Soil Bulk Density

Estimating soil bulk density with combined commercial soil water content and thermal property sensors

An Improved Thermo‐TDR Technique for Monitoring Soil Thermal Properties, Water Content, Bulk Density, and Porosity

Root influences on soil bulk density measurements with thermo-time domain reflectometry

Measuring Soil Water Content with Time Domain Reflectometry: an Improved Calibration Considering Soil Bulk Density

Development of Thermo-Time Domain Reflectometry for Vadose Zone Measurements

The Effects of Soil Bulk Density, Clay Content and Temperature on Soil Water Content Measurement Using Time‐domain Reflectometry

Study on a Calibration Equation for Soil Water Content in Field Tests Using Time Domain Reflectometry

Measuring Soil Water Content, Electrical Conductivity, and Thermal Properties with A Thermo-Time Domain Reflectometry Probe

An in Situ Probe‐spacing‐correction Thermo‐tdr Sensor to Measure Soil Water Content Accurately

Study on Relationship Between Dielectric Constant and Water Content of Rock-Soil Mixture by Time Domain Reflectometry.

Determining Water Content and Bulk Density: the Heat-Pulse Method Outperforms the Thermo-Tdr Method in High-Salinity Soils

DESIGN OF TDR SENSOR FOR JOINT MEASUREMENT OF SOIL WATER CONTENT AND DRY DENSITY AND ITS APPLICATION

Measurement of water content of contaminated soils by using TDR

Short, Multineedle Frequency Domain Reflectometry Sensor Suitable for Measuring Soil Water Content

A Newly Designed Tdr Probe for Soils with High Electrical Conductivities

Determination of Soil Bulk Density Dynamic in a Vertisol During Wetting and Drying Cycles Using Combined Soil Water Content and Thermal Property Sensors