Robustness of the anammox process at low temperatures and low dissolved oxygen for low C/N municipal wastewater treatment
Rui Wang,Jinjin Liu,Qiong Zhang,Xiyao Li,Shuying Wang,Yongzhen Peng
DOI: https://doi.org/10.1016/j.watres.2024.121209
IF: 12.8
2024-01-31
Water Research
Abstract:Low water temperatures and ammonium concentrations pose challenges for anammox applications in the treatment of low C/N municipal wastewater. In this study, a 10 L-water bath sequencing batch reactor combing biofilm and suspended sludge was designed for low C/N municipal wastewater treatment. The nitrogen removal performance via partial nitrification anammox-(endogenous) denitrification anammox process was investigated with anaerobic-aerobic-anoxic mode at low temperatures and dissolved oxygen (DO). The results showed that with the decrease of temperature from 30 to 15°C, the influent and effluent nitrogen concentrations and nitrogen removal efficiencies were 73.7±6.5 mg/L, 7.8±2.8 mg/L, and 89.4%, respectively, with aerobic hydraulic retention time of only 6 h and DO concentration of 0.2-0.5 mg/L. Among that, the stable anammox process compensated for the inhibitory effects of the low temperatures on the nitrification and denitrification processes. Notably, from 30 to 15°C, the anammox activity and relative abundance of the dominant Brocadia genus were increased from 39.7 to 45.5 mgN/gVSS/d and 7.3 to 12.0%, respectively; the single gene expression level of the biofilm increased 9.0 times. The anammox bacteria showed a good adaptation to temperatures reduction. However, nitrogen removal by anammox was not improved by increasing DO (≥ 4 mg/L) at 8-4°C. Overall, the results of this study demonstrate the feasibility of the mainstream anammox process at low temperatures.
environmental sciences,engineering, environmental,water resources