Abstract:Measurements of the density and viscosity of dimethoxymethane and 1,2-dimethoxyethane are reported over the temperature range from 243 K to 373 K and at pressures up to 20 MPa. The measurements were performed simultaneously using a vibrating-wire instrument operated in the forced mode of oscillation. The overall uncertainties of these results are 2.0% in viscosity and 0.2% in density. The measurements were correlated with a Tait-type equation for density and a hard-sphere model for viscosity. The maximum absolute deviation and the average absolute deviation (AAD) of the density measurements from the correlation for dimethoxymethane are 0.065% and 0.012%, respectively, and for 1,2-dimethoxyethane, are 0.16% and 0.044%. With regard to viscosity, the maximum absolute deviation and the AAD of the present results from the correlation for dimethoxymethane are 1.55% and 0.40%, respectively, and for 1,2-dimethoxyethane, are 1.05% and 0.26%. Comparisons of the experimental data and measurements from the literature with values calculated by the correlations at different temperatures and pressures are presented.

Surface Tension of Dimethoxymethane and Methyl Tert-Butyl Ether

Surface Tension of Dimethyl Ether from (213 to 368) K

Surface Tension of Diethyl Ether, Diisopropyl Ether, and Dibutyl Ether

Surface Tension of 2,2-Dimethylbutane from (233 to 378) K

Densities and Viscosities of Binary Mixtures of Methyl 4-Chlorobutyrate with Aromatic Hydrocarbons at T = (298.15 to 318.15) K

Isobaric Heat Capacity Measurements for Dimethyl Ether and 1,1-Difluoroethane in the Liquid Phase at Temperatures from 305 K to 365 K and Pressures Up to 5 Mpa

Surface tension of diethyl carbonate, 1,2-dimethoxyethane and diethyl adipate

Surface Tensions of Mixtures of Diesel Oil or Gasoline and Dimethoxymethane, Dimethyl Carbonate, or Ethanol

Surface Tension Measurements of Propane (R-290) and Isobutane (R-600A) from (253 to 333) K

Viscosity of Saturated Liquid Methyl tert-Butyl Ether

Measurement of the Critical Parameters and the Saturation Densities of Dimethyl Ether

Surface tension of dimethyl ether+propane from 243 to 333K

Density and Viscosity of Saturated Liquid Dimethoxymethane from (218.15 to 383.15) K

Excess Molar Enthalpies of Dimethyl Carbonate and (butanol Isomers and 1-Pentanol) at T = (298.15, 313.15, and 328.15) K and P = (0.1, 1.0, and 10.0) MPa

Vapor Pressure Measurements of Dimethyl Ether from (233 to 399) K

Density and Viscosity Measurements of Dimethoxymethane and 1,2-Dimethoxyethane from 243 K to 373 K up to 20 MPa

Surface Tension Measurements of Difluoromethane (R-32) and the Binary Mixture Difluoromethane (R-32) + 1,1,1,2-Tetrafluoroethane (R-134a) from (253 to 333) K

Vapor Pressure Measurements of Dimethyl Ether from (213 to 393) K

Surface Tension of Difluoromethane (R-32) + 1,1,1,2,3,3,3-Heptafluoropropane (R-227Ea) from (253 to 333) K

Surface Tension of Four Oxygenated Fuels: Experiment and Correlation

Experimental Measurement and Modeling of the Viscosity of Dimethyl Ether