Abstract:Energy and environmental issues have always been topics of great concern to the world in recent years. The production of electricity from solar and wind energy has increased dramatically. These significant developments in renewable energy technologies are now driving the development of a method to efficiently store and transport the inherently intermittent electricity from these natural resources [1]. Under this situation, the emergence of reversible solid oxide cells (RSOCs) has been attracted widespread attention. As a clean and efficient electrochemical conversion device, RSOCs can link electrical and chemical energy and convert flexibly, which is of great significance for power generation and energy storage [2]. It can operate in two modes: (i) as solid oxide fuel cells (SOFCs) for power production and (ii) as solid oxide electrolysis cells (SOECs) for hydrogen and oxygen production [3]. Herein, we successfully synthesized a novel perovskite Pr0.8Ca0.2Fe0.8Co0.2O3- δ and used it as an air electrode in reversible solid oxide cells. In the SOFCs mode, the peak power density is up to 1.056 W cm-2 at 850 ºC using hydrogen as the fuel and air as the oxidant. It can achieve 1.43 A cm-2 at 850 ºC under an operating voltage of 1.3 V in the SOECs mode with water content of 50%. Moreover, the cell can run stably in both SOFCs and SOECs modes with showing excellent reversibility. During a short-time reversible term, it remains both electrochemical performance and structure stable. These results demonstrate that the perovskite Pr0.8Ca0.2Fe0.8Co0.2O3- δ is promising air electrode for applications in RSOCs. References [1] Choi S, Davenport T C, Haile S M. Protonic ceramic electrochemical cells for hydrogen production and electricity generation: exceptional reversibility, stability, and demonstrated faradaic efficiency. Energy & Environmental Science, 2019, 12(1): 206-215. [2] Y. Luo, Y. Shi, Y. Zheng, N. Cai, Reversible solid oxide fuel cell for natural gas/renewable hybrid power generation systems, J Power Sources, 340 (2017), pp. 60-70. [3] Meng X., Liu Y., Yang N., Tan X., Liu J., J.C. Diniz da Costa, Liu S. Appl. Energy, 205 (2017), pp. 741-748

Reversible Solid Oxide Cell with Proton Conducting Electrolyte:Materials and Reaction Machanism

Dynamic Simulation of a Reversible Solid Oxide Cell System for Efficient H2 Production and Power Generation

Cathode Processes and Materials for Solid Oxide Fuel Cells with Proton Conductors As Electrolytes

A Synergistic Three-Phase, Triple-Conducting Air Electrode for Reversible Proton-Conducting Solid Oxide Cells

Electrochemical Performance of Pr0.8Ca0.2Fe0.8Co0.2O3-δ As Air Electrode for Reversible Solid Oxide Cells

New, Efficient, and Reliable Air Electrode Material for Proton-Conducting Reversible Solid Oxide Cells.

Electrode Performance and Analysis of Reversible Solid Oxide Fuel Cells with Proton Conducting Electrolyte of BaCe0.5Zr0.3Y0.2O3−δ

An Active and Stable Cobalt‐Free Ruddlesden–Popper Nd0.8Sr1.2Ni1‐xFexO4±δ Air Electrode for Reversible Proton‐Conducting Solid Oxide Cells

Solid Oxide Cells with Phase-Inversion Tape-Casted Hydrogen Electrode and SrSc<sub>0.175</sub>Nb<sub>0.025</sub>Co<sub>0.8</sub>O<sub>3</sub><sub> -</sub> Oxygen Electrode for High-Performance Reversible Power Generation and Hydrogen Production

Solid Oxide Cells with Phase-Inversion Tape-Casted Hydrogen Electrode and SrSc0.175Nb0.025Co0.8O3-δ Oxygen Electrode for High-Performance Reversible Power Generation and Hydrogen Production

(Invited) Advanced Electrode and Electrolyte Materials for Proton Conducting Solid Oxide Electrolysis Cells

(Invited) Proton‐Conducting Solid Oxide Electrolysis Cells for Hydrogen Production - Materials Design and Catalyst Surface Engineering

Reversible solid-oxide cells for clean and sustainable energy

(Invited) Recent Progress in the Development of Highly Durable and Conductive Proton Conductors for High-Performance Reversible Solid Oxide Cells

The development review of cathode materials for proton conducting solid oxide fuel cells

An efficient and prospective self-assembled hybrid electrocatalyst for symmetrical and reversible solid oxide cells

Progress Report on Proton Conducting Solid Oxide Electrolysis Cells

Intermediate-temperature solid oxide electrolysis cells with thin proton-conducting electrolyte and a robust air electrode

Sr-free Orthorhombic Perovskite Pr0.8Ca0.2Fe0.8Co0.2O3-δ As a High-Performance Air Electrode for Reversible Solid Oxide Cell

High-Performance Sr0.95Fe0.8Mo0.1Ni0.1O3−δ Electrode for Reversible Symmetrical Solid Oxide Cells

Steam electrolysis by solid oxide electrolysis cells (SOECs) with proton-conducting oxides