Abstract:The quasi-static crushing behavior of aluminum honeycomb materials is thoroughly evaluated using a combined experimental, analytical, and numerical approach. Based on experimental characterization, the constitutive properties of the honeycomb cores under flat-wise compression are approximated by an elastic perfectly plastic material with inclusion of hardening after densification. Two different cell size materials are tested and compared, and the effect of strain rate on the crushing stress is studied. The experimental results show that the crushing platen stress is directly related to the relative density of core materials, and it can be associated with the strain rate, even though the effect of strain rates is not so dominant based on the conducted quasi-static tests. A simple physical model for predicting the crushing wave length and stress is proposed and compared with the experimental data and available formulas in the literature. It is observed that the crushing wave length is close to the cell size and related to the geometric dimension and strain rate. The folding mechanism is also measured by the ARAMIS system (a photogrammetry technique), and the measured von Mises strains are compared with the numerical results from LS-DYNA, demonstrating that the folding mechanism is initiated by two plastic hinge lines formed at the cell corners. Multilayer effect is also investigated, and it indicates that including the second layer slightly decreases the maximal crushing stress, but the simple superposition is still applicable for crushing multilayer honeycomb cores with different density. Partial crushing due to small size cylindrical indenter is further studied, and the experiment shows that the partial crushing process can be described by an elastic—plastic hardening material. Side impact process of honeycomb materials is also investigated, and the collapse band and its propagation process are captured. The thorough characterization of core crushing behavior conducted in this study provides better understanding of the failure process of honeycomb materials and can be further employed to study energy absorption and impact response of sandwich structures.

EFFECT OF RANDOMLY REMOVING CELL WALLS ON THE DYNAMIC CRUSHING BEHAVIOUR OF HONEYCOMB STRUCTURES

Effect of Random Defects on Dynamic Response of Honeycomb Structures

Dynamic Crushing of 2 D Cellular Structures : A Finite Element Study

Strain-rate effect on initial crush stress of irregular honeycomb under dynamic loading and its deformation mechanism

Initial crush stress of cellular materials under dynamic loadings

In-plane crushing behaviour of hierarchical honeycombs: finite element simulation and analytical modelling

Dual-level Stress Plateaus in Honeycombs Subjected to Impact Loading: Perspectives from Bucklewaves, Buckling and Cell-Wall Progressive Folding

Shock wave speed and stress-strain relation of aluminium honeycombs under dynamic compression

Comparative Study of the In-Plane Uniaxial and Biaxial Crushing of Hexagonal, Re-Entrant, and Mixed Honeycombs

On dynamic crushing behavior of honeycomb-like hierarchical structures with perforated walls: Experimental and numerical investigations

Quasi-static crush behavior of aluminum hexagonal honeycomb with perforated cell walls

Compressive Crushing of Novel Aluminum Hexagonal Honeycombs with Perforations: Experimental and Numerical Investigations

In-plane crushing response and energy absorption of two different arranged circular honeycombs

In-plane Crushing Behaviors of Piecewise Linear Graded Honeycombs

STRESS DISTRIBUTION IN GRADED CELLULAR MATERIALS UNDER DYNAMIC COMPRESSION

Shock wave speed of irregular honeycombs under dynamic compression

Local Strain and Stress Calculation Methods of Irregular Honeycombs under Dynamic Compression

Dynamic Crushing of Voronoi Honeycombs: Local Stress-Strain States

Quasi-static Crushing Behavior of Aluminum Honeycomb Materials

In‐Plane Crashworthiness of Gradient Curved‐Walled Honeycombs: Experimental, Numerical Simulation, and Theoretical Analysis

Crush dynamics of square honeycomb thin rubber wall