Abstract:Health foods containing Panax notoginseng extract are developed in recent years. In this work, reflux extraction process was optimized using a design space approach to improve batch-to-batch consistency of P. notoginseng extract. Saponin yields and dry matter yield were identified as the process critical quality attributes (CQAs) of the extraction process. A risk assessment was applied to determine critical process parameters (CPPs), which were ethanol content (EC), amount of ethanol added (AEA), extraction time (ET) and extraction frequency (EF). Box-Behnken designed experiments were carried out to develop models between CPPs and process CQAs. Determination coefficients were higher than 0.90 for all the models. Higher ET, EF, and AEA all result in higher saponin yields and dry matter yield. Dry matter yield decrease as EC increases. Design space was calculated using a Monte-Carlo simulation method with the acceptable probability of 0.85. Normal operation ranges to attain process CQA criteria with a probability more than 94% are recommended as follows: EC of 84.0-86.0%, AEA of 5.0-7.0 mL/g, ET of 7.0-8.0 h, and EF of 2. Verification experiment results showed that operating EC, AEA, EF and ET within design space can attain CQA criteria. Most of the verification experiment results agreed well with prediction results, which means that the developed models are accurate and applicable in a larger scale extraction process. (C) 2014 Elsevier BY. All rights reserved.

Study on Extraction Process of Water-solubility Protein from American Ginseng

Studies on Extraction Process Optimization of Panax Notogingseng Saponins

Study on the Optimum Extraction Process of Ginsenosideswith Soak Method

Extraction Process of Panax Ginseng and Pueraria Lobata Anti-Aging Compound Prescripation

Optimum Technique of Extracting Total Ginseng Saponin from Root of Ginseng by Supersonic Wave Using Central Composite Design-Response Surface Methodology

Chromatographic elution process design space development for the purification of saponins in Panax notoginseng extract using a probability-based approach.

Optimization of Panax Notoginseng Extraction Process Using a Design Space Approach

Extraction of Water-soluble Protein from Ganoderma Lucidum Using Response Surface Methology

Study on Extraction Procession of Gandujing Granules with Orthogonal Design

Study on the Process of Extraction and Purification for Zhenqing Capsules

Green and Efficient Extraction of Polysaccharide and Ginsenoside from American Ginseng (Panax quinquefolius L.) by Deep Eutectic Solvent Extraction and Aqueous Two-Phase System

Process Development for the Decoloration of Panax Notoginseng Extracts: a Design Space Approach.

Study on Process Parameters in Multi-Stage Countercurrent Extraction by Multi-Index Optimization Method

Study on extraction and purification of glycoprotein and its physicochemical properties from Salvia miltiorrhiza Bunge

[A technological study on the extraction of ultra-fine powder of Panax notoginsen]

Determination of the Transformation of Ginsenosides in Ginseng Radix Et Rhizoma During Decoction with Water Using Ultra-Fast Liquid Chromatography Coupled with Tandem Mass Spectrometry.

[HPLC-CAD in Optimizating of Saponins Extraction from Radix Et Rhizoma Notoginseng].

The Application of Extracting Panax Notoginseng Polysaccharides by Orthogonal Method

[Optimization of the Circulatory Percolation Process for Extraction of Radix Ginseng Rubra].

Extraction Process Optimization for Total Saponins from Roots of Panax Notoginseng by Orthogonal Design

Protein Extraction from the Stem of Panax Ginseng C. A. Meyer: A Tissue of Lower Protein Extraction Efficiency for Proteomic Analysis