Abstract:Taylor-Couette flow with a high Taylor number and large radius ratio is widely present in fluid machinery, such as the internal clearance flow in a canned motor pump typically. Taylor-Couette flow with radius ratios from 0.934 to 0.977 and Taylor number from 107 to 1010 was investigated by numerical simulations. The results indicated that torque is positively correlated to radius ratio, while dimensionless torque is exponentially related to the Taylor number. Subsequently, the physical characteristics of the flow field were described by extracting statistical quantities such as the average azimuthal velocity profile, velocity fluctuations, and near-wall region analysis at four internal cylinder rotation frequencies and four radius ratios. The results revealed that increasing rotation frequency would increase velocity gradients near the wall, while higher radius ratios would produce more uniform velocity fluctuation distributions. In addition, near-wall profiles showed a constant shear force layer, while the logarithmic layer was affected by rotation frequency and radius ratio. The detailed analysis revealed that as the rotation frequency increased, the flow gradually transitioned to a turbulent state, intensifying the interaction between large and small vortex structures. The rotation speeds of Taylor vortices remained consistent across different radius ratios, with smaller scales and more numerous vortices observed at larger ratios. Smaller radius ratios led to more fine-scale vortex structures near the cylindrical wall, significantly impacting azimuthal velocity fluctuations. Finally, near-wall velocity streaks are presented to demonstrate their periodic nature and the relationship between high-speed and low-speed regions, as well as their interaction with the wall and changes with distance.

Large-eddy Simulations of Turbulent Swirling Flows Injected into a Dump Chamber

The Effect of Swirling Injector Geometry on the Flow Dynamics of Precessing Vortex Core

Numerical Simulation for Effects of Venturi Tube on Swirling Flow Field

Effects of various geometric parameters on the computed swirl numbers and flow topology in a bidirectional vortex chamber

Large Eddy Simulation of Unconfined Turbulent Swirling Flow

POD and DMD Analysis of Dynamic Flow Structures in the Recirculation Region of an Unconfined Swirl Cup

Large-Eddy Simulation of Underexpanded Supersonic Swirling Jets

Numerical simulation of a double helix vortex structure in a tangential chamber

Numerical Simulation of Turbulent Taylor-Couette Flow with High Taylor Number and Large Radius Ratio in High-Speed Canned Motor Pump Internals

Large-eddy simulation of unstable non-reactive flow in a swirler combustor

Particle Statistics in a Gas–solid Coaxial Strongly Swirling Flow: A Direct Numerical Simulation

Large eddy simulation of vortex breakdown bubble in the unconfined non-reactive swirling flow

A Numerical Study of Dynamics of A Temporally Evolving Swirling Jet

Direct and inverse pumping in flows with homogeneous and non-homogeneous swirl

Large Eddy Simulation of Recirculation and Precessing Vortex Core in Swirling Flow Around a Bluff-Body

A review for measurements and simulations of swirling gas-particle flows

Large Eddy Simulation on Unsteady Flow and Heat Transfer Behaviors of Double Swirl Cooling Configuration

Numerical Simulation of Internal Flow Fields of Swirl Coaxial Injector in a Hot Environment.

Large-eddy simulation, convective instability, and modal causality of coaxial supersonic air–water jets considering a swirl effect

Characterization of Mixing Dynamics of the Transcritical Bi-swirl Jets

Numerical Analyses of Water Swirls in Aquaculture Tanks