Abstract:Nitrate accumulation is a common phenomenon in aquaculture that can lead to eutrophication of surrounding water bodies. This study used poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) as a carbon source and substrate and performed a microbial co-occurrence network ecological analysis to elucidate the denitrification processes in two packed-bed reactors with different salinities. The denitrification rate reached maximum values of 0.438 and 0.446 kg m−3 d−1 in reactor I (salinity 0 ‰) and reactor II (salinity 20 ‰), respectively. Although ammonia was formed in both systems based on dissimilation nitrate reduction to ammonia (DNRA), the concentration was very low (2.47 ± 1.99 and 2.84 ± 1.79 mg L−1); moreover, the nitrite content was average (1.01 ± 0.87 and 0.96 ± 0.86 mg L−1). These results suggested that denitrification dominated in both reactors. PHBV generally presented a stable release of DOC, although a sharp increase was observed in the start-up period of reactor II. 16S rRNA results showed that reactor I had richer microbial diversity than reactor II. Among the top ten taxa, Betaproteobacteria was the dominant class in reactor I while Gammaproteobacteria was the dominant class in reactor II. In the stable period, Thauera and Denitromonas was the most abundant genera in reactor I and reactor II, respectively. In addition, the bacterial co-occurrence network showed that reactor I had a more complex node and edge network and faster start-up time compared to reactor II; however, reactor II had a more stable nitrogen removal capacity. Higher expression of NorB and NosZ genes in reactor II indicated higher efficient denitrification in seawater system. The SEM and FTIR showed bacterial development and materials surface erosion. These findings verified the denitrification performance and niche differences between freshwater and seawater environments.

[Denitrification Using PBS As Carbon Source and Biofilm Supporter: Effect of Ph].

Effect of Denitrifying Biofilm Development on the Surface Configuration and Chemical Composition of PBS Polymer

Poly(butylene succinate)/bamboo powder blends as solid-phase carbon source and biofilm carrier for denitrifying biofilters treating wastewater from recirculating aquaculture system

Long-term Effect of Ph on Denitrification: High Ph Benefits Achieving Partial-Denitrification.

Removal of Nitrates from Drinking Water Using Biodegradable Polymers As Both Substrate and Biofilm Carrier

Nitrate Removal From Groundwater Using Biodegradable Polymers As Carbon Source And Biofilm Support

Denitrification using PBS as carbon source and biofilm support in a packed-bed bioreactor

Biological denitrification using poly(butanediol succinate) as electron donor

The Effect of Poly-Β-hydroxyalkanoates Degradation Rate on Nitrous Oxide Production in a Denitrifying Phosphorus Removal System.

Biological Denitrification Using Poly(Butylene Succinate) As Carbon Source and Biofilm Carrier for Recirculating Aquaculture System Effluent Treatment

Biological Denitrification of Drinking Water Using Biodegradable Polymer

Denitrification performance and bacterial ecological network of a reactor using biodegradable poly(3-hydroxybutyrate-co-3-hydroxyvalerate) as an electron donor for nitrate removal from aquaculture wastewater

[Two-Stage Denitrification Process Performance with Solid Slow-Release Carbon Source]

Biological denitrification using PHBV as carbon source and biofilm carrier

Biological denitrification with a novel biodegradable polymer as carbon source and biofilm carrier

Effect of N/P Ratio on Denitrification Efficiency of Three-dimensional Electrode/Biofilm Reactor

Study on the Effects of Different Types of Solid Carbon Sources on Denitrification Experiments

Study of Influential Elements on Nitrate Removal from Simulated Groundwater by Biofilm Electrode Reactor

Nitrogen Removal and Biofilm Characteristics of a Post-denitrifying Biofilter in a Full-scale Reclaimed Wastewater Treatment Plant

Denitrification Performance of a Denitrifier-Augmented Packed-Bed Bioreactor with Solid Carbon Source

Biological denitrification in simulated groundwater using polybutylene succinate or polylactic acid-based composites as carbon source