Abstract:This paper aims to clarify the characteristics of ash deposits formed upon the blending of two low-rank lignites that have distinctively different properties, i.e. one has a low ash melting point, rich in Na and S, while another has a higher ash melting point, rich in Ca and Cl. A 3 MWth pilot-scale furnace has been used for the combustion, with a variety of cooling oil-jacketed probes installed along the furnace for ash deposit sampling. As have been confirmed, there are strong synergetic interactions between the ash-forming elements of the two lignites. At the mass fractions of 50% and 70% for the high-Cl coal, the ash fusion temperatures are even higher than the two single coals. The synergetic interactions between two coals enhanced the formation of crystallised species such as hematite, sulfates and carbonates that are mixed with Ca-Si-O matrix to reduce its stickiness and slagging propensity in the burner vicinity. The blending of up to 50wt% high-Cl coal resulted in the enhanced emission of gaseous HCl and Cl2, whereas the high-Cl coal mass fraction above 50wt% enhanced the formation of NaCl in super-heater ash deposits, via the chlorination of sodium from low-Cl coal, which are detrimental to tube corrosion. The Cl chemistry is complicated for the lignite blending combustion. The emission of gaseous Cl2 is remarkable, accounting for 6–8% of the total chorine that is far higher than the predicted values based on the thermodynamic equilibrium. The Cl2 emitted at high temperatures is also stable, with almost all the consumption reactions being frozen upon the rapid quenching of flue gas. The blending of up to 50wt% high-Cl coal is viable in minimising ash slagging and fouling. However, special materials and/or coating technologies should be employed to minimise the Cl2-related corrosion for the water tubes.

Dynamic Sulfur Emission Derived from Combustion of Lignite Blends

Dynamic Sulfur Emission from Combustion of Blends of Coal Liquefaction Residue and Biomass

Characteristics Experimental of Fly Ash Release in Combustion Process of Blended Coal

Measurement and Numerical Simulation of Ultrafine Particle Size Distribution in the Early Stage of High-Sodium Lignite Combustion

Study on Sulfur Release in Combustion of Coal Liquefaction Residuals

Investigations into the Ignition Behaviors of Pulverized Coals and Coal Blends in a Drop Tube Furnace Using Flame Monitoring Techniques

Non-isothermal Thermogravimetric Investigation on Mutual Effect Between Bituminite and Anthracite in Blends for Blast Furnace Injection

Quantitative analysis of minerals of blended coal ash at high temperature and its influence on slagging

Ash Deposition Behaviours Upon the Combustion of Low-Rank Coal Blends in a 3 MWth Pilot-Scale Pulverised Coal-Fired Furnace

Granularity Collocation of Single Coal on Comprehensive Combustion of Blends

Characteristics of fluorine and sulfur release during coal combustion

Effects of Blending Ratio on Combustion and NO Emission Characteristics During Co-Firing of Semi-Char and Lignite in a 350 Kw Pulverized Coal-Fired Furnace

Effects of Pore Fractal Structures on Combustion of Shenhua Coal Blends

STUDY ON SO_2-RELEASING REGULARITY IN THE PROCESS OF MIXDELY BURNING COAL AND BOIMASS

Experimental Investigation of Synergistic Behaviors of Lignite and Wasted Activated Sludge During Their Co-Combustion

Simulation of the Effects of Blending Out-Furnace and In-Furnace on Combustion Performance under Low Load

Experimental And Numerical Analyses On Ignition And Burnout Characteristic Of Low-Rank Lignite And Semi-Char Blends

Dynamic Characteristics of Sulfur Release During Coal-Water Slurry Combustion

NOx and H2S Formation in the Reductive Zone of Air-Staged Combustion of Pulverized Blended Coals

Combustion Performance of the Blend of Lignite and Residues of Coal Liquefaction in Thermal-Banlance

Influence Of Coal Blending On Ash Fusibility In Reducing Atmosphere