Abstract:Nowadays the Digital Storage starts to replace analog type Oscilloscope due to the better functionality and features. Digital Storage Oscilloscope (DSO) is a device used by engineers, scientist or engineering students to verify or check the electronic circuit operation where the displayed signal in the DSO monitor can be analyzed and saved for future reference. DSO uses an Analog-to-Digital Converter (ADC) to convert the electrical voltage or current being measured into digital form at certain sampling time. The sample of the signal will be saved and accumulated until it able to describe a waveform and reassembles the waveform for viewing in on the monitor screen. The purpose of the research is to design the PC-Based 4-Channel Oscilloscope where the electrical signal being measured will be displayed on the PC (Personal Computer) monitor equipped with functionality button shown in term of Window based GUI (Graphical User Interface). The GUI is developed by using Microsoft Visual C++ 6.0. The PIC (Peripheral Interface Controller) is used for data acquisition which transfers the data being measured to PC through RS232. Here 4 built-in ADCs are used in order to produce 4 channels Oscilloscope. The PIC is programmed by using C language to read the data from ADC and then transfer the data to PC. Frequency of 5 kHz is used as a sampling rate. Meanwhile, the clock speed of 20 MHz is selected in order to reduce the power consumption and noise. In addition, 8 Kbytes RAM chip is used for storing purpose. The research outcome shows 3 types of waveforms such as Sinusoidal, Square and Triangular are displayed with the correct frequency and amplitude. It is tested by using Signal Generator as an input to produce the waveform to the hardware. The integration between hardware (PIC) and software (GUI) is fully working. Beside that, the GUI is very user friendly and easy to be configured. The data from the signal being measured also can be saved and restored.

Design of Controller Module in Simple Digital Storage Oscillograph

The Design and Facture of a Digital Control DC Regulated Power Supply Based on Single Chip

Design of simple digital oscilloscope

Design and Implementation of Simple Digital Oscilloscope Based on STM32

Design Of A Digital Storage Oscillograph System Based On Mu C/Os-Ii And Arm

Design of Simple Digital Oscilloscope Based on Double MCU

Designing the PC-Based 4-Channel Digital Storage Oscilloscope by using DSP Techniques

Low Cost Handheld Digital Oscilloscope

Design of a digital oscillograph based on NIOS CPU

Design of Low-power Portable Multi-function Digital Oscilloscope

Design of Portable Oscilloscope Based on ATMEGA64 MCU

Design of Ultra High Speed Data Acquisition System in Digital Oscillometer

The Research and Design of Embedded New Type of Thrombelastograph Coagulation Analyzer System

Design of Low-cost Electronic Jacquard Controller

Embedded Design on Optical Coherence Tomography Control System

Architectural Proposal for Low-Cost Portable Digital Oscilloscopes Based on Microcontrollers and Operational Amplifiers

Storage Design of Digital Storage Oscilloscope Basing on I~2C Bus

Low-Cost Embedded Controller for Complex Control Systems

Design of Digital Storage Oscillograph Based on LabVIEW

The Design of Electronic Scales Based on AT89C2051 Microcontroller

Design of a simple DC digital voltmeter