Abstract:A heat exchanger is an important component where high-temperature hot air and normal-temperature water exchange heat. The heat exchange area of the finned tube heat exchanger is calculated by the rated working conditions. However, with the decrease of the heat storage temperature, the hot air temperature at the outlet of the thermodynamic energy storage device changes in a large range, directly affecting the heat exchange capacity and efficiency of the finned tube heat exchanger. This paper's three-dimensional model is established. The heat exchanger of the finned tube is designed according to the temperature of the outlet section and the return section temperature of the heat storage system. The thermodynamic physical parameter property and characteristics of which heat exchanger's finned tube in the air's velocity range of 1∼10 m/s are simulated by fluent software. The velocity, temperature, pressure, and heat exchanger coefficient distribution characteristics at different positions along the airflow direction are obtained. The simulation results show that the mean flow velocity is 2.0 m/s and 5.0 m/s at the inlet cross-section. The average temperature difference between the inlet and outlet is 69.5 K and 100.5 K, respectively. The fin surface temperature difference between the first and eighth rows of finned tubes is 12.5 K and 14.4 K, respectively. The air pressure loss at the air channel inlet's section and outlet's section is 16.1 Pa and 69.4 Pa, respectively. When the inlet flow rate change from starting at 1.0 m/s and ending at 10.0 m/s, the tube's wall coefficient of heat transfer, which is the second level of finned tubes, only increases by 1.8 times. The tube's wall coefficient of heat transfer of the eighth level of finned tubes increases by the maximum, to 5 times the original, but the heat energy exchange capacity of which the second level of finned tubes is always the strongest.

Numerical Simulation of Heat Transfer Process of New-style Axisymmetrical Internally Finned Tube

Experimental Study and Numerical Simulation on Convective Heat Transfer and Pressure Drop of Internally Longitudinal Finned Tube

Numerical study on flow and heat transfer characteristics of a novel centrosymmetric tube with bent inner fins based on experiment

Numerical Simulation and Verification on Heat Transfer Characteristics of H-type Finned Tubes

Numerical Simulation of Heat Transfer in Finned Tube of Heat Recovery Unit Using Fluid-Solid Coupled Method

Nummerical Simulation Of Heat Transfer Of Air Across Finned Tube-Banks

Numerical Simulation of Heat Transfer Characteristics of Finned Tube Heat Exchanger at Different Flow Velocities

Optimization Simulation of Heat Transfer Performance of Internally Finned Tubes with Blocked Core-Tube

Numerical Analysis on Heat Transfer and Pressure Drop Performance of an Asymmetric Finned Tube Heat Exchanger

Numerical simulation of heat transfer and flow performance of flat fin

Numerical Study on Performance Optimization of H-type Finned Tubes

Numerical Investigation On The Heat Transfer Enhancement Behavior Outside Longitudinal Finned Tubes

Convective Heat Transfer and Pressure Drop of a Tube with Internal Longitudinal Fins

Three-dimensional numerical simulation on flow and heat transfer in spirally inner finned tubes

Experimental and numerical investigation on the flow and heat transfer characteristics of the tube with an integrated internal longitudinal fin

Numerical Simulation on Heat Transfer Enhancement Inside Internally Longitudinal Protuberant Finned Tube under Pulsating Flow

NUMERICAL SIMULATION OF LAMINAR FLOW AND HEAT TRANSFER IN SHELL-AND-TUBE HEAT EXCHANGER WITH HELICAL BAFFLES

Numerical Computation of Laminar Natural Convection Heat Transfer Around a Horizontal Compound Tube with External Longitudinal Fins

Laminar heat transfer characteristics of internally finned tube with sinusoidal wavy fin

Experimental Study on the Pressure Drop and Heat Transfer of Two Different Tubes With Plain-Rectangle Internal Fins

Experimental and Numerical Studies on Actual Flue Gas Condensation Heat Transfer in a Left–right Symmetric Internally Finned Tube