Abstract:Robots have the capability to perform precise and minimally invasive surgeries. For the robot-assisted teleoperated fracture reduction surgery, the operating accuracy largely depends on visual reference through fluoroscopy. The operator needs to adjust several times according to computed tomography (CT) image. During the robot reduction surgery, there are large muscle forces generated by the numerous muscles surrounding the fractured segments. However, there is no effective reduction force feedback to the master robot. In this paper, in order to improve the operating accuracy of the fracture reduction with teleoperated surgery mode, six-dimensional constraints of the master robot are studied by utilizing the virtual fixture method, which can restrict the position and orientation through the force and visual guidance. The six-dimensional force sensor is used to collect information of the reduction force. For the master robot, a motor stall control method based on the current loop is adopted to provide feedback of the reduction force, which can enhance the surgeon's sense of operational presence. To verify the effectiveness of virtual fixture and force feedback, the fracture reduction experiments are conducted on the fractured model with simulating lager muscle force. Experimental results show that the reduction errors are within acceptable ranges: , , , , , . The number of fluoroscopy procedures required ranges from 1 to 2 and the average operation time is approximately 170 s. Compared to traditional methods and other teleoperation methods, the fracture reduction accuracy and surgical efficiency of method in this paper are significantly improved.

Geometry Arithmetic on the Tele-teaching Pose Based on Force Sensing

Dynamic Model on Teleteaching in Remote Welding

Measurement, Identification, and Compensation of Pose Errors for Six-Axis Gantry Automated Fiber Placement Machine

Position identifying of curve welding seam in tele-teaching based on force sensing

Inflection point identifying of weld seam based on force sensing in tele-teaching

Transition control between two tele-teaching points based on force sensing in remote welding

Investigation of welding seam identifying based on force sensing in remote teaching

A Kinematic Calibration Method for Robots Based on the PGTF Error Model and Levenberg-Marquardt Algorithm

Geometric Error Contribution Modeling and Sensitivity Evaluating for Each Axis of Five-Axis Machine Tools Based on POE Theory and Transforming Differential Changes Between Coordinate Frames

A Feature Matching Algorithm Applied to Welding Trajectory Revising

Teleteaching Approach for Sensor-Based Arc Welding Telerobotic System.

An Accurate On-Line Correction Strategy For Gravity Compensation Aiming At Teaching By Touch Of Collaborative Robots

Graphical Force And Haptic Feedback Teleoperation System For Live Power Lines Maintaining Robot

Teleteaching Technology Used in Remote Welding Assisted by Laser Vision Sensing

Investigation on teleoperation of remote welding based on stereoscopic video images

Geometry resolving method for variable contact point in dexterous manipulation of robot hand

Control And Modeling For Direct Teaching Of Industrial Articulated Robotic Arms

Learning compliant grasping and manipulation by teleoperation with adaptive force control

Collision avoidance strategy of remote welding teleteaching based on touch sensing

Geometric model-based joint angle selection criterion for force parameter identification & Decoupling control method of position and posture in shaft-hole assembly

Six-dimensional constraints and force feedback for robot-assisted teleoperated fracture reduction