Abstract:The dynamic process of arc pressure and corresponding arc column expansion, which is the main feature after arc ignition and has a significant effect on the breaking behaviour of low-voltage circuit breakers, is studied. By constructing a three dimensional mathematical model of air arc plasma and adopting the Control Volume Method, the parameters of arc plasma including temperature and pressure are obtained. The variations of pressure field and temperature field with time are simulated. The result indicates that there are six stages for the process of arc column expansion according to the variation of pressure in arc chamber. In the first stage, the maximal pressure locates in the region close to cathode, and in the second stage the maximal pressure shifts to the region close to the anode. In the third stage, the pressure difference between the middle of arc column and the ambient gas is very large, so the arc column begins to expand apparently. In the fourth stage, the pressure wave propagates towards both ends and the maximal pressure appears at the two ends when the pressure wave reaches both sidewalls. In the fifth stage, the pressure wave is reflected and collides in the middle of the arc chamber. In the last stage, the propagation and reflection of pressure wave will repeat several times until a steady burning state is reached. In addition, the experimental results of arc column expansion, corresponding to the arc pressure variation, are presented to verify the simulation results.

Study of the Influence of Arc Ignition Position on Arc Motion in Low-Voltage Circuit Breaker

Experimental study of the influence of arc ignition position on arc motion in low voltage circuit breaker

Simulation of the Effects of Several Factors on Arc Plasma Behavior in Low Voltage Circuit Breaker

Investigation on Arc Behavior During Arc Motion in Air DC Circuit Breaker

Simulation of the Venting Configuration Effects on Arc Plasma Motion in Low-Voltage Circuit Breaker

Simulation and Experimental Research on Air Arc Motion in Low-voltage Circuit Breaker

Measurement and Analysis on Gas Flow and Arc Motion in Low Voltage Molded Case Circuit Breaker

Study Of The Effect Of Gassing Material On Are Behavior In Low Voltage Circuit Breaker

Simulation Experiments and Research of Arc for Low Voltage Circuit Breaker

Simulation on the Air Arc Characteristcs Concerning the Influence of Wall Ablation

The Influence of Medium on Low-Voltage Circuit Breaker Arcs

Numerical Simulation of Arc Motion During Interruption Process of Low-Voltage Circuit Breakers

Simulation and Experimental Study of Arc Motion in a Low-Voltage Circuit Breaker Considering Wall Ablation.

Study Of The Arc Motion Characteristics Of Low-Voltage Circuit Breaker Based On Magnetic Sensor Array

Simulation and Experimental Analysis of Arc Motion Characteristics in Air Circuit Breaker

The Influence of Electrode Erosion on the Air Arc in a Low-Voltage Circuit Breaker

Simulation and Experiment on Airarc Characteristics in Low-Voltage Circuit Breaker Considering Wall Ablation

Simulation on Dynamic Characteristics of Arc in Low Voltage Circuit Breaker Modelling Based on FLUENT

Simulation and Experimental Study of Arc Column Expansion after Ignition in Low-Voltage Circuit Breakers

Simulation study on arc motion process of DC miniature circuit breakers

Effect of Different Vent Configurations on the Interruption Performance of Arc Chamber.