Temporal Process and Leaching Characteristics for Runoff Pollutants in Typical Solid Waste Improved Bioretention Filters
Chunbo Jiang,Xinzhu Peng,Zhenguo Dang,Jiake Li,Wen Dong,Xi Yang,Yangxuan Zhang,Xuerui Bai,Qiang Yang
DOI: https://doi.org/10.1007/s11270-023-06434-1
2023-07-09
Abstract:It has been proved that the modification and ratio of media can improve the pollutant purification and stormwater infiltration capacity effectively for bioretention system. However, the addition of solid waste or its recycled products modifiers may increase the risk of contaminants leaching, especially in situations of strong load impact or pollutant accumulation and the long-term operation. Thus affecting the health of the media ecosystem, benign growth of plants and reducing the purification effect. For problems with unclear leaching mechanism and influencing factors of solid waste modified bioretention media. In this study, representative solid wastes including leaf compost (LC), corn straw biochar (bio-char) water treatment residues (WTR), fly ash (FA), and recycled aggregate of construction waste (RACW) were used as modifiers to prepare bioretention improved media. The leaching mechanism and time-varying characteristics of these improved media were studied through static adsorption test and modern detection technologies; the adsorption capacity of WTR (natural air drying granulation or high-temperature pyrolysis to produce biochar) for ammonia (NH 4 + -N) and orthophosphate (PO 4 3− ) is stronger than that of other materials. In the dynamic adsorption experiment (intermittent pulse tests of desorption-adsorption-desorption process) of improved media, pollutants outflow concentration showed a trend of decreasing-increasing-decreasing under the influence of background content of pollutants, inflow load, and operation time, and the leaching of NO 3 − -N was the most obvious in the leaching process. The contents of TN, TP, and heavy metals (Cu, Zn, and Cd) after the experiment were all higher than those before the dynamic adsorption experiment, and the average pollutant concentration removal rates were 54.1%, 71.1%, 95.1%, 91.8%, and 94.2%, respectively. This indicates that the total cumulative amount during the study period is greater than the leaching amount, and WTR and RACW are more pronounced. The leaching characteristics of solid waste improved fillers from several aspects of media parameter, influence factors, detection method, and resistance-control technologies were revealed and elucidated their leaching-clogging interaction mechanism.
environmental sciences,water resources,meteorology & atmospheric sciences