Abstract:The smooth joint contact model has been used extensively to simulate the shear behaviour of joints in the numerical simulations with particle flow code. Results from existing studies have revealed that this model suffers from the particle interlocking problem taking place at the shear displacement greater than the minimum particle diameter. To solve this problem, the shear box genesis approach was proposed, by which particles in the upper and lower halves of a joint are generated separately, and the intended joint plane will be added as a common boundary. However, the shear box genesis approach is not a satisfactory solution to the interlocking problem yet. Three problems are usually encountered in practice: first, particles are still likely to move across the intended joint plane and cause the interlocking; second, the shear box genesis approach inevitably causes the periodic change in the contact number along the intended joint plane; third, it is difficult to incorporate the nonlinear closure behaviour of joints. Therefore, this paper aims to solve the shortcomings, and to apply the improvements to the simulation of joint shear behaviour. The interlocking problem was successfully solved by introducing the joint side checking method, and specifying the value of maximum allowed closure. The periodic stress fluctuation during shearing was eliminated by the non-unified ball generation method. The nonlinear closure behaviour of joints was captured by embedding the Barton–Bandis model. To verify the applicability of the improvements to rough joints, a series of numerical and experimental direct shear tests of rough joints were conducted. In general, good agreements were achieved between the numerical modelling results and laboratory measurements. This improved shear box genesis approach enhances the ability of the smooth joint contact model to simulate the shear behaviour of joints, and also has the ability to track the damage evolution during the joint shearing process.

Experimental Study and Simulation of Kinetics on Linkage Structure of Rolling-cut Bilateral Shear

Kinematics and dynamicsanalysis for slotting machine six bar linkage

Research on a new hydraulic rolling shear shearing mechanism and its control system

Model of Metal Microstructure Evolution Considering Shear Effect and Its Simulation Application in Rolling of Heavy Cylinders

Shear characteristics of interface based on subloading-friction model

Theoretical Analysis and Numerical Simulation of External Spline Cold Rolling

Rotary high-speed shearing cutting technology and experiment

Design and Optimization of CAM Connecting Rod System in High-Speed Drives Based on Dynamic Characteristics and Mathematical Model

Modelling the shearing behaviour of joints using an improved shear box genesis approach in particle flow code (2D) and its validation

Deduction of a quadratic velocity field and its application to rolling force of extra-thick plate

Development and Application on Simulation System of Plate Rolling

Numerical Study on Mechanical Behaviors of New Type of Steel Shear-Connection Horizontal Joint in Prefabricated Shear Wall Structure

Parametric study of aluminum bar shearing using Johnson-Cook material modeling

A fast calculation method of large-cylinder asymmetrical rolling force considering shear effect

Experimental Study on the Cyclic Behaviour of Shear Links Made of BLY160 Steel

Application of MMC Model on Simulation of Shearing Process of Thick Hot-Rolled High Strength Steel Plate

Shear Model Substructure Test Interface Simulation Research

Dynamic Analysis of Double Racks Gear 3D Roll Forming Machine

Dynamic characteristics analysis on shearer drum in condition of cutting coal with different distributed rocks

Analysis of Thread Rolling Process Using an Analytical Single Tooth Rolling Model Based on the Slip Line Field Theory and Slab Method

Nonlinear dynamic analysis and experimental study of multi-link press with dry friction clearances of revolute joints