Abstract:Sleeping is an important human activity and heating system is needed for a comfort sleeping thermal environment in winter. By combining the merits from both an air source heat pump (ASHP) and a Chinese-Kang heating system, a prototype bed-based ASHP (B-ASHP) system has been proposed, and several design/operating parameters were experimentally and numerically studied previously. A numerical study using a digital thermal manikin (DTM) on the impacts of four influencing factors, i.e., operating mode, bed surface temperature (tbed), thermal resistance of mattress (Rmat), and thermal resistance of quilt (Rq) on sleeping thermal comfort was carried out, and the study results are reported in this paper. The numerical study results suggested that firstly, to maintain a suitable sleeping thermal environment, the use of only the Horizontal section (H-Section) of the bed-based heating terminal of the B-ASHP system was adequate; however using the Horizontal and Vertical section (H+V-Section) could minimize the temperature difference between the micro-climate close to the bed and outside environment, although with a higher energy consumption. Secondly, tbed of the bed-based terminal should be carefully selected, and a tbed of 44 oC could both meet the requirement of thermal comfort and acceptable operating efficiency of the B-ASHP system. Thirdly, the use of a mattress would reduce the heat transfer from the bed-based terminal to a sleeping person and indoor space, however an excessively higher Rmat of mattress would reduce the heating capacity and operating efficiency, leading to a cold sleeping environment. Finally, the use of a quilt would help prevent the heat loss from a sleeping person, thereby maintaining a warmer sleeping thermal environment, however a higher-than-necessary Rq of quilt would decrease the sleeping thermal comfort.

Study on thermal storage performance of solar KANG and thermal comfort for sleeping environments

A Study on Thermal Performance, Thermal Comfort in Sleeping Environment and Solar Energy Contribution of Solar Chinese Kang

Study on indoor temperature and thermal performance of a novel solar coupled floor and Kang heating system

Experimental Study of A Combined System of Solar Kang and Solar Air Collector

NUMERICAL STUDY ON A NOVEL SOLAR HEATING SYSTEM WITH COUPLED SOLAR KANG AND TROMBE WALL

Thermal Analysis of a New Solar Kang System

Simulation Study on Thermal Performance of Solar Coupled Air Source Heat Pump System with Phase Change Heat Storage in Cold Regions

A New Chinese Solar Kang and Its Dynamic Heat Transfer Model

A numerical study on evaluating sleeping thermal comfort using a Chinese-Kang based space heating system

Experimental Assessment of Thermal Performance of an Elevated Chinese Kang System

Thermal and Energy Analysis of a Chinese Kang

Thermal Storage Performance of Underground Cave Dwellings under Kang Intermittent Heating: A Case Study of Northern China

Experimental investigation and feasibility analysis on a capillary radiant heating system based on solar and air source heat pump dual heat source

Study on Thermal Storage Wall Heating System of Traditional Houses in Cold Climate Zone of China: A Case Study in Southern Shaanxi

Thermal performance analysis and thermal environment creates effect of a novel solar hot-air phase change bed

Prospective Study of a Novel Heat Pump System with Solar Energy Spectral Beam Splitting

Application of solar energy storage system in building structure design and its thermal process analysis

The Thermal Effect of the Tandem Kang Model for Rural Houses in Northern China: a Case Study in Tangshan

Cooling Performance Comparison of Radiant Floor System and All-air System with Solar Radiation

Performance Analysis and Instant/delayed Characteristics of a Solar Heating System Used in Cold Regions

Theoretical and Experimental Investigation on A Thermoelectric Cooling and Heating System Driven by Solar