Abstract:Currently eutrophication has become a hot issue all over the world.The removal of phosphorus from wastewaters is regarded as an important approach to fight eutrophication since phosphorus is one of the main factors causing eutrophication.The chemical phosphorus removal technology with ferric salt as a precipitant is in widespread use to meet the wastewater discharge standard.The optimization of phosphorus removal technology helps to cut down the cost of wastewater treatment.Herein the response surface methodology(RSM)is introduced to investigate the individual and combined effects of operation parameters.The performance of chemical phosphorus removal technology with ferric salt as a precipitant is dependant on a series of factors.Fe/P ratio,pH and flash mixing speed(FMS)were chosen as objects of study,and single-factor experiment and multiple-factor experiment were carried out to optimize the phosphorus removal efficiency.The results of single-factor experiment showed that both Fe/P ratio and pH had significant effects on phosphorus removal,but FMS did not.When the phosphorus concentration was 100mg/L,the optimal operation parameters were Fe/P ratio 3.0,pH 8.0,FMS 175-225r/min.The results of multiple-factor experiment showed that the individual effects of operation parameters on phosphorus removal were in order as Fe/PpH FMS.The combined effects of operation parameters were in order as Fe/P-FMS pH-FMS Fe/P-pH,among which the effects of Fe/P-FMS and Fe/P-pH were positive and the effect of pH-FMS was negative.Based on the experiment,priority/combinationmodel was proposed to enhance the phosphorus removal with ferric salt as a precipitant.The optimal operation parameters were as follows:Fe/P=2.57,pH=6.31and FMS=136r/min,when the phosphorus concentration was 100mg/L.Both synthetic and real wastewaters were used to verify the feasibility ofpriority/combinationmodel.Operated according to the model,the phosphorus removal was larger than 97%and the fractional error was less than 3%.It can be concluded that the response surface methodology is feasible for the optimization of operation parameters in wastewater treatment processes.Thepriority/combinationmodel is effective for the improvement of phosphorus removal from wastewaters with ferric salt as a precipitant.During the wastewater treatment,the synergic action of operation parameters should be fully used,while the antagonistic action of operation parameters should be carefully avoided.

Methamidophos-degrading Bacteria for the Extracellular Polysaccharide Fermented by Using Response Surface Methodology

Optimization of fermentation conditions for production of a novel antifungal metabolite by response surface methodology

Study on Degradation of Methamidophos by Pseudomonas Sp. S-2

Extraction Condition Optimizing Of Poly (3-Hydroxybutyric Acid) From Microorganism Using Response Surface Methodology

[Isolation and Characterization of a Chlorpyrifos Degrading Bacteria and Its Bioremediation Application in the Soil].

Synchronous Response in Methanogenesis and Anaerobic Degradation of Pentachlorophenol in Flooded Soil.

Process optimization for PHA production by activated sludge using response surface methodology

High-efficiency degradation of methomyl by the novel bacterial consortium MF0904: Performance, structural analysis, metabolic pathways, and environmental bioremediation

Co-metabolic degradation of dimethoate by Raoultella sp. X1

Process Optimization for Phosphorus Removal with Ferric Salt by Response Surface Methodology

STATISTICAL ANALYSIS FOR OPTIMIZING TETRAHYDROFURAN DEGRADATION BY PSEUDOMONAS OLEOVORANS DT4 IN FED-BATCH CULTURE

Isolation and Characterization of a Chlorpyrifos and 3,5,6-Trichloro-2-pyridinol Degrading Bacterium.

Improvement of Exo-Polysaccharides Production and Modeling Kinetics by Armillaria Luteo-Virens Sacc. in Submerged Cultivation

Optimization of Medium Constituents for Ε-Poly-l-lysine Fermentation with Response Surface Methodology.

Optimization of fermentation process of paraherquamide A by response surface methodology

Optimization of Culture Medium for Methionine Aminopeptidase Fermentation by Response Surface Methodology

The key sulfometuron-methyl degrading bacteria isolation based on soil bacterial phylogenetic molecular ecological networks and application for bioremediation of contaminated soil by immobilization

Optimization for microbial degradation of petroleum hydrocarbon (TPH) by Enterobacter sp. S-1 using response surface methodology

Optimization of Phenol Degradation by Candida Tropicalis Z-04 Using Plackett-Burman Design and Response Surface Methodology

Pseudomonas Sp.zxy-1,A Newly Isolated and Highly Efficient Atrazine-Degrading Bacterium,and Optimization of Biodegradation Using Response Surface Methodology

Optimization of Extraction Process of Polysaccharides from Wild Termitomyces Albuminosus Using Response Surface Methodology