Abstract:Damage and failure in quasi-brittle materials such as rocks, concrete, and ceramics, have a complex non-linear behavior due to their heterogeneous character and the development of a fracture process zone (FPZ), formed by micro-cracking around the tip of an induced or pre-existing flaw. A softening behavior is observed in the FPZ, and the linear elastic fracture mechanic (LEFM) cannot correctly reproduce the stress field ahead of the crack tip. The existence of the FPZ may be the intrinsic cause of the size effect. An appropriate modeling of this process zone is mandatory to reproduce accurately the failure propagation and consequently, the structural behavior. Different from most of the domain numerical techniques, the boundary element method (BEM) requires (besides the boundary division into elements) only the discretization of a small region where dissipative effects occur. Cells with embedded continuum strong discontinuity approach (CSDA), placed in the region where the crack is supposed to occur, are capable of capturing the transition of regimes in the failure zone. Numerical bifurcation analysis, based on the singularity of the localization tensor, is used to determine the end of the continuum regime. Weak and strong discontinuity regimes are associated with diffuse micro-cracks (strain discontinuity) and macro-crack (displacement discontinuity). A variable bandwidth model is used during the weak discontinuity regime to represent the advance of micro-cracks density and their coalescence. Continuum and discrete cohesive isotropic damage models are used to describe the softening behavior. Analysis of three-dimensional problems with single crack in standard and mixed fracture modes, using this transitional approach and the BEM cells is firstly presented in this work. Experimental reference results are used to attest the capability of the approach in reproducing the structural behavior during crack propagation. Some necessary advances required for its applications for general complex structural problems are pointed out.

The analysis of crack problems with non-local elasticity

Finite Element Analysis of Crack Dynamic Response in Gradient Non- Homogeneous Finite Plate

A Cohesive Model-Based Nonlinear Discontinuous Deformation Analysis for Tensile Fracture in Geotechnical Materials

Improved Discontinuous Deformation Analysis Method for Modeling Tensile Cracking in Quasi-Brittle Materials

Crack analysis using a dislocation-based displacement discontinuity method: Derivation of higher-order elements, numerical implementation, and accuracy analysis

Development of Discontinuous Deformation Analysis with Displacement-Dependent Interface Shear Strength

A Numerical Analysis with Scaled Boundary Finite Element Method to Simulate Mixed-mode Crack Propagation for Concrete Beams

Dislocation-based finite element method for calculating stress intensity factors of cracks

Analysis of the dynamic behavior of two parallel symmetric cracks using the non-local theory

Dislocation-based Semi-Analytical Method for Calculating Stress Intensity Factors of Cracks: Two-dimensional Cases

Investigation of the scattering of harmonic elastic antiplane shear waves by a finite crack using the non-local theory

Cracking elements method with a dissipation-based arc-length approach

Elastic fields of double branched and Kalthoff–Winkler cracks in a half-plane

Boundary element method: cells with embedded discontinuity modeling the fracture process zone in 3D failure analysis

Computation of the crack opening displacement in the phase-field model

SOME APPLICATIONS AND RECENT ADVANCES OF NUMERICAL METHODS FOR STRONG DISCONTINUITIES IN QUASI-BRITTLE MATERIAL

Analytical and Numerical Analyses for a Penny-Shaped Crack Embedded in an Infinite Transversely Isotropic Multi-Ferroic Composite Medium: Semi-Permeable Electro-Magnetic Boundary Condition

An Analysis of 3d Finite Cracked Bodies

A local to global (L2G) finite element method for efficient and robust analysis of arbitrary cracking in 2D solids

The Nonlocal Solution of Two Parallel Cracks in Functionally Graded Materials Subjected to Harmonic Anti-Plane Shear Waves

Analyzing Multiple Crack Propagation Using Extended Finite Element Method (X-FEM)